Membrane Filter Holder

Compare Tool

Select up to 3 products

Membrane Filter Holder
1 - 32 of 61
Sort
View
Show
  • Vacuum-Type Glass Membrane Holders

    GE Healthcare

    For general purpose vacuum filtration Borosilicate glass funnel body and stem are attached securely by quick-action spring clamp of anodized aluminum Easily disassembled for loading, cleaning and autoclaving Include single-hole silicone rubber stopper

  • Roby 25 Filters For Automation

    GE Healthcare

    …wide range of ready-to-use filter holders fitted with a variety of membrane filters are available. For difficult to filter samples see the range of filter holders with membrane and integral glass fiber prefilters or glass fiber filters only. Filter housing is made from polypropylene.…

  • Polypropylene Syringe Filter Holder

    Advantec MFS

    …range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and support screen material is PP. Units come standard with silicone o-rings. Replacement parts and alternate…

  • Whatman Vacuum-Type Glass Membrane Holder, glass reservoir

    GE Healthcare

    Vacuum-Type Glass Membrane Holder, glass reservoir, 47 mm, 300 ml volume, membrane filter accessories Vacuum-Type Glass Membrane Holder, glass reservoir, 47 mm, 300 ml volume, membrane filter accessories

  • Whatman Sterile Cellulose Nitrate Membrane Filters

    GE Healthcare

    …deposits. High strength and flexibility preserves membrane integrity Most membranes are inherently brittle and difficult to handle; some may be damaged as they are loaded into holders or during standard use. Whatman cellulose nitrate membrane filters are designed to tolerate rough handling. …

  • Filter Holders

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

  • Whatman Syringe Type Holders

    GE Healthcare

    Membrane holder, stainless steel syringe filter type Membrane holder, stainless steel syringe filter type Available in stainless steel and polypropylene with luer fittings for use with a standard syringe. The holders are designed for the quick and easy clarification, sterilization, and removal of…

  • Polysulfone Bottle-Top Filter Holders

    Thermo Scientific Nalgene

    …filling and vacuum filtration without holding filter to bottle Major components molded of durable, break-resistant, transparent polysulfone (PSF), which is non-toxic, easy-to-clean and exhibits low protein-binding Removable sterilization membrane support plate provides maximum flow rate and…

  • Whatman Pop-Top and Swin-Lok Plastic Filter Holders

    GE Healthcare

    Filter holders designed for microfiltration and ultra cleaning of small volumes of liquids using positive pressure. Designed for microfiltration and ultra cleaning of small volumes of liquids using positive pressure. All three holders will accommodate Nuclepore track-etched and cast membranes.

  • Sanitary Pressure Filter Holders, Stainless Steel

    Advantec MFS

    … The holder features a PTFE coated photoetched stainless steel filter support screen for autoclaving with filter in place. Fittings are 1.5" with tri-clamp to 14.3mm hose barb. Unit comes standard with silicone o-ring. Other materials are available. Seal membrane by hand tightening…

  • Vacuum Filter Holder Set, 90mm

    United Scientific Supplies

    …for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter…

  • Polypropylene In-Line Filter Holder

    Advantec MFS

    …range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and support screen material is PP; units come standard with silicone o-rings. Replacement parts and alternate…

  • Non-Sterile Cellulose Nitrate Membranes 0.8 µm

    GE Healthcare

    …is often the cause of membranes tearing in their holders after autoclaving. It may also cause a reduction in flow rate and total throughput. Whatman membranes exhibit a low shrinkage during autoclaving. White plain filters This is the standard membrane filter for the majority of…

  • GF/D Borosilicate Glass Microfiber Filters

    GE Healthcare

    …Extremely high speed; ten times more rapid than the fastest comparable retention cellulose filter paper Withstands temperature to 500°C Designed as a membrane pre-filter, with sizes to fit most holders Used for sample collecting and testing in clinical screening; borosilicate glass…

  • Chemically Resistant PFA In-Line Filter Holders

    Advantec MFS

    …similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow for flow in either direction. The exterior locking ring ensures quick assembly without tearing the membrane filter or releasing lines. PFA47 has…

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

  • Membrane Circles, Cellulose Nitrate, White Plain, 0.45mm 90mm

    GE Healthcare

    …is often the cause of membranes tearing in their holders after autoclaving. It may also cause a reduction in flow rate and total throughput. Whatman membranes exhibit a low shrinkage during autoclaving. White plain filters This is the standard membrane filter for the majority of laboratory…

  • Microanalysis Vacuum Filter Holder Set, Stainless

    United Scientific Supplies

    filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters installed. Unlaminated PTFE or PVDF membranes

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    …for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter…

  • 13mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter small volumes  3 funnel sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet…

  • Whatman Vacuum Type Glass Holders

    GE Healthcare

    Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Vacuum type glass holders Produced from borosilicate glass and available with a choice of…

  • Pressure Filter Holders with Reservoir, Stainless Steel

    Advantec MFS

    …steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for pressurizing the reservoir and for adding additional sample. Available in either type 304 or 316 stainless steel. A silicone o-ring seals the membrane

  • Whatman Non-Sterile Cellulose Nitrate Membranes 12 µm

    GE Healthcare

    …and is often the cause of membranes tearing in their holders after autoclaving. It may also cause a reduction in flow rate and total throughput. Whatman membranes exhibit a low shrinkage during autoclaving. White plain filters This is the standard membrane filter for the majority of laboratory…

  • Non-Sterile Cellulose Nitrate Membranes – 8 µm

    GE Healthcare

    …is often the cause of membranes tearing in their holders after autoclaving. It may also cause a reduction in flow rate and total throughput. Whatman membranes exhibit a low shrinkage during autoclaving. White plain filters This is the standard membrane filter for the majority of…

  • Whatman Non-Sterile Cellulose Nitrate Membranes 0.2 µm

    GE Healthcare

    …and is often the cause of membranes tearing in their holders after autoclaving. It may also cause a reduction in flow rate and total throughput. Whatman membranes exhibit a low shrinkage during autoclaving. White plain filters This is the standard membrane filter for the majority of laboratory…

  • GE Filter Holder

    GVS Filter Technology

    …of sample and the 47 mm filter can filter up to one liter depending on the viscosity of the sample. The polypropylene holder can withstand temperatures up to 121°C. The dual-support screen design allows for bidirectional sample flow. Three silicone O-rings help to prevent leaks with all membranes.

  • Fluid Contamination Monitors

    MilliporeSigma

    …Transparent, disposable filter holders made from Tenite® plastic and pre-assembled with MF-Millipore filters (effective filtration area is 9 cm 2 ). A thick cellulose pad, 34 mm diameter, between the monitor sections seals the filter to distribute sample flow evenly over the filter surface. …

  • Whatman GV 025 Series Glass Vacuum Filtration Device

    GE Healthcare

    …solutions.Autoclavable and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 025 Series GV 025/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Whatman GV 100 Series Glass Vacuum Filtration Device

    GE Healthcare

    …solutions.Autoclavable and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 100 Series GV 100/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Vented In-Line Filter Holder, Stainless Steel

    Advantec MFS

    47mm filter diameter Available in type 304ss or 316ss Filter liquids or gases at point-of-use This 47mm in-line holder (model KS47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The…

  • Whatman GV 050 Series Glass Vacuum Filtration Device

    GE Healthcare

    …in dry heat to 180°C.Can be used up to 200°C.GV 050 Series GV 050/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, silicone cap and supplied with air inlet, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Large Stainless Steel Pressure Filter Holders

    Advantec MFS

    …type applications. The holder features a PTFE coated photoetched stainless steel filter support screen for autoclaving with filter in place. Unit comes standard with silicone o-ring and PTFE gasket. Additional FPM or FEP o-rings are available. Seal membrane by hand tightening locking wing…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.