Mechanical Stirrer

Compare Tool

Select up to 3 products

Mechanical Stirrer
1 - 32 of 54
Sort
View
Show
  • …Provides optimum stability required for larger, heavier instruments and attachments, for example with rheological measurements using overhead stirrers. The stand has an adjustment screw which can be used to compensate for an uneven laboratory table surface. Diameter of support rod: 34 mm …

  • …ORDERED SEPARATELY. **MAX RPM WILL DEPEND ON SHAFT AND/OR AGITATOR TYPE, ALONG WITH ALIGNMENT OF MOTOR AND COUPLING. CHEMGLASS RECOMMENDS A MAX OF 500 RPM WHEN USED WITH ANY GLASS VESSEL, LID OR SHAFT. LONGER LENGTH STIRRER SHAFTS ARE REQUIRED FOR USE WITH CG-2077-M MECHANICAL SEAL STIR BEARINGS.

  • …ORDERED SEPARATELY. **MAX RPM WILL DEPEND ON SHAFT AND/OR AGITATOR TYPE, ALONG WITH ALIGNMENT OF MOTOR AND COUPLING. CHEMGLASS RECOMMENDS A MAX OF 500 RPM WHEN USED WITH ANY GLASS VESSEL, LID OR SHAFT. LONGER LENGTH STIRRER SHAFTS ARE REQUIRED FOR USE WITH CG-2077-M MECHANICAL SEAL STIR BEARINGS.

  • Stirrer Shafts

    Chemglass

    … Please Note: CG-2097-75 and CG-2097-100 are made from heavy wall tubing and have indents for agitator positioning.  Indents are spaced every 10" from the bottom agitator.  Replacement stirrer shafts are for use with mechanical seal stir bearing on listed support frame. 

  • Powerful, mechanically controlled laboratory stirrer designed for highly viscous applications for quantities up to 80 l (H2O). It is suitable for intensive mixing for use in laboratories and pilot plants. The stirrer comes equipped with a protection for overheating of the motor by means of…

  • …that magnetic stirrers can only be used for relatively small (under 4 liters) experiments. They also have difficulty dealing with viscous liquids or thick suspensions. For larger volumes or more viscous liquids, some sort of mechanical stirring is typically needed. Magnetic stirrers are often…

  • Cimarec i Maxi 5L Stirrer

    Thermo Scientific

    Use stirrers anywhere; can be submerged With powerful magnets and no moving parts, these inductive-drive stirrers are designed to go into water baths and incubators. Standard Telemodul controller features space-saving design. Outstanding mechanical, physical, thermal and chemical…

  • …that magnetic stirrers can only be used for relatively small (under 4 liters) experiments. They also have difficulty dealing with viscous liquids or thick suspensions. For larger volumes or more viscous liquids, some sort of mechanical stirring is typically needed. Magnetic stirrers are often…

  • Magnetic Stirrers

    Crystal Technologies

    …Motorless driven mechanism for quiet and maintenance-free operation. Sleek low profile design. MS1 Series Magnetic Stirrers The MS1 series of Magnetic Stirrers are available with either a LED keypad or LCD touchpad control. The rotating magnetic field of these stirrers is generated…

  • Magnetic Stirrers

    Crystal Technologies

    …maintenance-free unit. Each stirrer has a wide range of speed and magnetic strengths which are adjustable to meet the demands of stirring solutions with different volumes and viscosities. Elegant design with digital control and display Motorless driven mechanism for quiet and…

  • The ESP is an ultraflat magnetic stirrer with no moving mechanical components, it is therefore maintenance-free. The stirring system consists of coils that induce a rotating magnetic field. A gentle start-up ensures optimum progression of the stirring speed whilst its modern, ergonomic structure is…

  • Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.

  • …a 45/50 joint and are contoured for use with our 9448 and 9456 series Mini-Lab flasks. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 and 8055. Compatible with our 8050 mechanical seal and 13443 collet type bearings. Join to stirrer motor using 8124 series chucks.

  • Precision ground glass stirring shafts, 19mm OD, hollow. Button type shafts accept 8085 blades and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks.

  • …8091,8092,8093,8100 agitators and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks. Heavy duty design intended for use with large flasks up to 72 liters.

  • …Code -19, 3 liter size will fit a 2 liter flask, but closely. Flask opening must be 29/42 or larger. Use with Trubore bearings 8036,8038,8039,8040,8043,8047,8051,8053 and 8055. Compatible with our 8050 mechanical seal and 13443 collet type bearings. Join to stirrer motor using 8124 series chucks.

  • Scienceware® Lattice Support Stand

    Bel-Art - SP Scienceware

    …added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as mechanical stirrers. Sturdy polypropylene base provides maximum stability and is stan and chemical resistant. Rods measure 72.5 H x 1.25 D cm (28.5 H x 0.5 D…

  • … PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor Smaller…

  • …stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor Smaller…

  • ProCulture Orbital Shaker Platform

    Bel-Art - SP Scienceware

    … Shake and stir; rotating orbit diameter of 21.7mm Shaker adjustment is controlled by setting the magnetic stirrer to the desired speed Platform protects the operating mechanism from spills; non-skid surface prevents containers from sliding Base incorporates built-in hand holds for lifting…

  • Spindrive Orbital Vibrating Platform

    Bel-Art - SP Scienceware

    …rotating orbit diameter of 1.52mm (¹/16") Vibration adjustment is controlled by setting the magnetic stirrer to the desired speed Platform protects the operating mechanism from spills; non-skid surface to prevent containers from sliding Base incorporates built-in hand holds for…

  • …applications. Using the graphite-impregnated PTFE packing and ACE Stir-Lube, pressures down to 7 microns have been obtained at 170rpm using only a mechanical pump. Speeds over 1000rpm are not advisable due to heat generated. Indefinite packing life. Frequent tightening of the packing box is…

  • … PLEASE NOTE: FRAME IS SHIPPED ASSEMBLED IN A WOODEN CRATE VIA COMMON CARRIER, FOB VINELAND, NJ.;CLEARANCE BELOW VALVE ON CG-1968-X-10 IS CALCULATED USING A CG-2077-H PTFE STIRRER BEARING. WHEN USING THE MECHANICAL SEAL STIR BEARING, HEIGHT OF STAND OR CLEARANCE BELOW VALVE WILL NEED TO BE MODIFIED.

  • …stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New & Improved Open Frame Design Provides Excellent Accessibility Support…

  • …stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New & Improved Open Frame Design Provides Excellent Accessibility 6-Neck…

  • … PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor Digital…

  • … PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor Digital…

  • …stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New & Improved Open Frame Design Provides Excellent Accessibility Support…

  • …stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New & Improved Open Frame Design Provides Excellent Accessibility 6-Neck…

  • …stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New & Improved Open Frame Design Provides Excellent Accessibility 6-Neck…

  • …stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New & Improved Open Frame Design Provides Excellent Accessibility Support…

  • … PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED USING THE CG-2077-H STIRRER BEARING. IF YOU REQUIRE THE CG-2077-M MECHANICAL SEAL STIR BEARING, THEN THE GLASS LID MUST BE REPLACED BY CG-1968-B-01 S.S. LID. Features:  Rugged 1"…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.