Mantle Heaters

Compare Tool

Select up to 3 products

Mantle Heaters
1 - 32 of 42
Sort
View
Show
  • Heaters

    Glas-Col

    Griffin beaker heaters Maximum internal temperature 450°C Resilient and pliable interior, which cradles fragile beakers Heat is concentrated at the bottom, so even small liquid volumes can be heated Glass cloth mantle conforms to shape of beaker for even application of heat Controller…

  • …time-proportioning control of temperature for loads of up to 1,200 watts Temperature range 0-500°C (0-1,000°F) Used with heating mantles, tapes, cords, small ovens and other resistive heating loads Controller has a calibrated set-point dial in °C and °F Load and…

  • Micro- and Macro-Kjeldahl Extraction Heaters

    Electrothermal (Cole-Parmer)

    …Macro models, one for 100- 300ml vessels and the second for 500-800ml vessels. Each heating mantle has it own energy regulator incorporating an On/Off switch and a "Mains to Heater" amber neon indicator. There is also a "Mains On" clear neon indicator on the front panel.…

  • Thermowell heating mantle

    MilliporeSigma

    Economical and dependable. These mantles have a ceramic heat cavity (resistance wire completely embedded), a grounded metal housing for safer operation, a low profile that permits magnetic stirring, and can be operated at up to 550 C. May be used as an air or sand bath. All models have a 36 in.,…

  • Thermowell heating mantle

    MilliporeSigma

    Economical and dependable. These mantles have a ceramic heat cavity (resistance wire completely embedded), a grounded metal housing for safer operation, a low profile that permits magnetic stirring, and can be operated at up to 550 C. May be used as an air or sand bath. All models have a 36 in.,…

  • Thermowell heating mantle

    MilliporeSigma

    Economical and dependable. These mantles have a ceramic heat cavity (resistance wire completely embedded), a grounded metal housing for safer operation, a low profile that permits magnetic stirring, and can be operated at up to 550 C. May be used as an air or sand bath. All models have a 36 in.,…

  • Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Mount on lattice work or bench top Model 5915A01 will accommodate non-conductive loads to 1200 watts; model 5915A05 to 2400 watts. Electrical…

  • Controls two separate circuits independently Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Use on bench top or mount to lattice work using clamp provided on back panel Will…

  • Manually adjustable; has a percentage-timer design and no sensing element Regulates mantles, tapes and cords, as well as small furnaces, ovens, hot plates, dies and other applications requiring stepless control Can be used on any non-inductive loads to its rated capacity of 1,440 watts …

  • Provides a safety backup for lab heating processes Compact, 1/16 DIN unit Allows for over-temperature limiting Terminates primary control when temperature exceeds set limit Model 5916A30 will accommodate a non-conductive load to 1200 watts; Model 5916A35 to 2400 watts.…

  • User friendly microprocessor-based ramping control Microprocessor based PID control Ramp-rate or time-based programming profiles 24 Step program capability Program looping Guaranteed soak (dwell) deviation Auto tuning function allows automatic setting of control…

  • Use with heating mantles, tapes, cords, small ovens and other resistive heating loads Digital dual output display for set point and process temperature indication Automatic tuning for accuracy with minimum overshoot Auto cold junction compensation and thermocouple break protection …

  • Micro-Kjedahl Extraction Heater

    Techne (Cole-Parmer)

    …of 12.7mm diamter max. This 6 recess model accommodates flasks of between 18 to 50ml. Each heating mantle has it own energy regulator incorporating an On/Off switch and a "Mains to Heater" amber neon indicator. There is also a "Mains On" clear neon indicator on the front panel.…

  • Heating Mantles

    Glas-Col

    …Standards Association. Available in custom sizes on special order. In self-standing metal case, Model TM (5910C10 to C45) Glass cloth mantle, which is suspended in cylindrical aluminum housing; heavily insulated against heat loss Heating element is distributed over bottom and…

  • …Metal-Housed Heating Mantles are fiberglass insulated heaters for laboratory and pilot laboratory applications. They are used to heat a variety of round bottom shaped vessels, to either increase temperature or keep media at a constant process temperature. All heating mantles are manufactured to high…

  • This mantle's even heat distribution prevents scorching of clear resinous materials. It's one-circuit heat input simplifies temperature control. Resin flask mantles, as well as most other Series O mantles, are available modified to accept vessel drains or other tubulations.

  • …Heating Mantles are fiberglass insulated round bottom flask heaters for laboratory and pilot laboratory applications. They are used to heat a variety of round bottom shaped vessels, to either increase temperature or keep media at a constant process temperature. All heating mantles are manufactured…

  • Series M Mantles

    Glas-Col

    The Series M mantle is the most compact mantle with an aluminum shell that can heat flasks up to 72 liters. Like the Series TM, this mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. Only the bottom of the…

  • EMEA Heating Mantles For Soxhlet Extraction

    Electrothermal (Cole-Parmer)

    …For additional operator protection a stainless steel safety screen is grounded directly to the supply cable that encloses the heaters. In the event of a spill the heater element is supplied as a cartridge for quick and easy replacement. The flexible heating element is located within a thermal…

  • Electrothermal EMA Stirring Heating Mantles

    Electrothermal (Cole-Parmer)

    …"Cool-to-touch" design Maximum element temperature 450°C Built-in energy regulator Replaceble insulated heater cartridge Indicator lamps for power and heater operation A chemically resistant polypropylene outer casing A grounded earth screen and double fuses for extra…

  • … Features include a built-in energy regulator with an arbitrary scale, “heater on” indicator light and an internal fuse. All units are available in eight flask capacities from 50 mL to 5,000 mL. The 5,000 mL mantles have two heating circuits with switching for the upper circuit. The…

  • Electromantle® EMV and EMX Heating Mantles

    Electrothermal (Cole-Parmer)

    …outer casing Maximum element temperature 450°C Built-in energy regulator Replaceable insulated heater cartridge Indicator lamps for power and heater operation Chemically resistant polypropylene outer casing Grounded earth screen and double fuses for added…

  • …up to 450°C "Cool-to-touch" outer casing Built-in energy regulator Indicator lamps for power and heater operation Replaceable insulated heater cartridge Rugged and easy to clean powder coated aluminium outer casing Non-skid feet and support rod clamps (but not…

  • …HOT POCKET model) Dual display of both actual and set point temperatures Soft, wrap-around sealing mantle fits directly onto the column HOT POCKET Column Heaters Temperature range: Just above ambient to 85°C Temperature accuracy: ±2°C with ±0.1°C…

  • Digi-Mantles

    Electrothermal (Cole-Parmer)

    …makes Digi-Mantles a very cost-effective option. Heater Cartridge The heater cartridge ensures that the temperature is uniformly distributed across the round bottom flask. Even at an element temperature of 450°C, the outside of the heater cartridge remains "cool-to-the-touch" due to the air…

  • For use with Thomas 5912L10 series Synchronizes the rotation of the magnetic fields with its solid-state electronic controls Fine control of stirring speed; there is almost no variation; no speed increase in warming or slowdown in cooling Can be reproducibly set to any given speed; range 50 rpm…

  • Multi (Extraction) Mantles: 3 Recess Model

    Electrothermal (Cole-Parmer)

    …(Extraction) Mantle with three recesses has a built-in electronic controller and offers a choice of heater only (EME3). They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains "cool-to-the-touch". For Heater EME3 models …

  • Heating Mantles/Stirrers in Self-Standing Metal Case Eliminates need for mantles with holes or very thin insulation that will accommodate separate stirring devices The optional EMC-4 StirControl II (Thomas number 5912M10) creates and synchronizes a rotating magnetic field within the StirMantle…

  • Multi (Extraction) Mantles: 6 Recess Model

    Electrothermal (Cole-Parmer)

    …provide maximum heat transfer and support Earth (ground) screen encloses the heater for added safety Individual heater cartridges are replaceable Neon lights indicate when power is on and supplied to heaters and, if applicable, supplied to stirrers Additional Features for…

  • Used to control THERMOWELL heating mantles or other resistive heating circuits (hot plates, heat tapes, water baths, etc). Available in solid-state or proportional on/off models. All models are fused (without circuit breakers). Calibrated in terms of percent power level from 5 to 90% (i.e. when knob…

  • Extraction Apparatus

    Electrothermal (Cole-Parmer)

    …provide maximum heat transfer and support Earth (ground) screen encloses the heater for added safety Individual heater cartridges are replaceable Neon lights indicate when power is on and supplied to heaters and, if applicable, supplied to stirrers Please note: Glassware is not…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.