Male Luer Lock

Compare Tool

Select up to 3 products

Male Luer Lock
1 - 32 of 61
Sort
View
Show
  • Male Luer Lock Blanks

    Cadence Science

    Cadence Science® male luer lock blanks can be used in a variety of designs where male luer fittings are essential. The blank male luer lock allows the user the option of modifying these components to their own requirements. Manufactured from brass to ensure durability, they can be plated to your…

  • Male Luer Lock Adapters

    Hamilton

  • Male Luer Lock to Barb, Natural

    Qosina

    Technical Features: fits 1/8 inch ID Tubing (0.125 inch, 3.2 mm)

  • Animal Free Male Luer Lock Plug, PP

    Cole-Parmer

  • MALE LUER LOCK RN HUB(L) ADPTR

    Hamilton

  • Male Luer Lock to Male Luer Lock Connector with One Rotating Collar

    Qosina

    Materials: PC, MABS

  • Needleless Injection Site, Male Luer Lock, Swabbable

    Qosina

    …Qosina part #80147 is a swabbable, needleless injection site equipped with a male luer lock connector. Made of tinted polycarbonate and silicone, this luer-activated valve is opened by the stem of a male luer. Once connected to the female luer lock, the valve is open, allowing for flow of fluids.

  • ASSY,LUER LOCK,MALE,1/4-28

    Hamilton

  • Three-Way Stopcock Valve, 2 Female Luers to Male Luer

    DWK Life Sciences (Kimble)

    Heavy-duty nylon, 3-way control with locking fittings on all ports. 

  • MALE LUER RN HUB (L) ADAPTER

    Hamilton

    …adapter connects to the end of TLL and LT syringes and can be used for sample spiking. The MTB sampling valve also connects to the ends of a TLL or LT syringes to create sample lock syringes. Finally the Luer adapters convert Large Hub Removable Needle (RN) syringes to various luer terminations.

  • Syringe Needles With Hubs For Luer Tip And Luer Lock Connections

    Hamilton

    … 304 stainless steel needle Standard 2” length Use with Luer Tip and Luer Lock syringes sold without needle or for Luer adapters. Nickel-plated brass or Kel-F (CTFE) hubs fit both male and female Luer connectors.They allow quick change of needle and use of different gauge and/or…

  • Adapters, Female Luer Locks, Vacuum

    Chemglass

    Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

  • Adapters, Female Luer Locks, Vacuum, Stopcocks

    Chemglass

    Adapter has a 1/4 " -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

  • Liquid chromatography columns Luer Lock, Non-jacketed, bed volume 8 mL, I.D. × L…

    MilliporeSigma

    …fixed bed length configurations are available: Luer Lock, non-jacketed: constructed with fixed polypropylene end caps, polyethylene bed supports, and Luer Lock inlet and outlet fittings. The Luer Lock connections on these columns are male. The polyethylene bed support has a nominal pore size…

  • Luer-to-Luer Adapters

    Cadence Science

    …with plastic male luer lock adapters. Uniquely designed to facilitate easy cleaning and maintenance. Male Luer Lock (MLL) – male luer slip with a threaded sheath for a secure fitting to a female luer lock. Male Luer (ML) – male luer slip that fits with a female luer. For…

  • CHROMABOND® Flash Columns and Connecting Kits

    MACHEREY-NAGEL

    …nylon unions; 2 x 1/4"-28 PP luer locks female; 1 x 1/4"-28 PP luer locks male; 1 x 1/4"-28 PP luer tip male CHROMABOND® Flash Stand Alone Kit consists of: 1 x 1/4"-28 PP luer lock female; 1 x 1/4"-28 PP luer lock male; 2 x 1/8" ETFE ferrules; 2 x 1/4"-28…

  • Corning® 150mL Easy Grip Polystyrene Storage Bottles with with Dip Tube

    Corning

    …transfer caps have two ports. One port ends in a 0.2µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a Male Luer Lock. The dip tube reaches all the way to the bottom of the flask for easy aseptic transfer of your liquid handling processes.

  • Polycarbonate Sterile Erlenmeyer Flask with Dip Tube

    Corning

    …transfer caps have two ports. One port ends in a 0.2 µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a male Luer lock. The dip tube reaches all the way to the bottom of the flask for easy aseptic transfer of your liquid handling processes.

  • Stainless Steel - 316 Tubing, 1/16in o.d. x .007 in i.d., 3 ft

    PerkinElmer

    …Effective Filtration Area (cm2): 1.09 Pore Size (µm): 0.45 µm Holdup Volume (µl): Sample Volume (mL): Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50°C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: …

  • Maroon PVDF Syringe Filters, 0.22 µm, 30 mm

    PerkinElmer

    …Effective Filtration Area (cm2): 5.39 Pore Size (µm): 0.22 µm Holdup Volume (µl): Sample Volume (mL): Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 6 bar Typical Applications: High particulate…

  • Disposable Aseptic Transfer Caps for Plastic Erlenmeyer Flasks

    Corning

    …port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch (6.4mm) OD chemically resistant, heat sealable flexible tubing, ending in a male luer lock (MLL) closed with a female luer sealing cap

  • Red PTFE (Hydrophilic) Syringe Filters, 0.45 µm, 13 mm

    PerkinElmer

    …Area (cm2): 1.09 Pore Size (µm): 0.45 µm Holdup Volume (µl): <25 Sample Volume (mL): <10 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50°C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

  • Puradisc™ Syringe Filters

    GE Healthcare

    …with standard inlet (female luer) and outlet (male luer) connections. Options include a sterile, medical-grade blister pack for critical applications and a special tube tip outlet that allows the sample to be accurately dispensed into a micro-vial, eliminating air lock. Pigment-free polypropylene…

  • Yellow PVDF Syringe Filters, 0.22 µm, 13 mm

    PerkinElmer

    …Area (cm2): 1.09 Pore Size (µm): 0.22 µm Holdup Volume (µl): <25 Sample Volume (mL): <10 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50°C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

  • Maroon PVDF Syringe Filters, 0.45 µm, 30 mm

    PerkinElmer

    …Effective Filtration Area (cm2): 5.39 Pore Size (µm): 0.45 µm Holdup Volume (µl): Sample Volume (mL): Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 6 bar Typical Applications High particulate…

  • Red PTFE (Hydrophilic) Syringe Filters, 0.45 µm, 25 mm

    PerkinElmer

    …Area (cm2): 4.08 Pore Size (µm): 0.45 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

  • Red PTFE (Hydrophobic) Syringe Filters, 0.22 µm, 25 mm

    PerkinElmer

    …Area (cm2): 4.08 Pore Size (µm):0.22 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

  • Yellow PVDF Syringe Filters, 0.22 µm, 25 mm

    PerkinElmer

    …Area (cm2): 4.08 Pore Size (µm): 0.22 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

  • Yellow PVDF Syringe Filters, 0.45 µm, 13 mm

    PerkinElmer

    …Area (cm2): 1.09 Pore Size (µm): 0.45 µm Holdup Volume (µl): <25 Sample Volume (mL): <10 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50°C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

  • Flex-Column 1.5X100cm Pk3

    DWK Life Sciences (Kimble)

    … Bed support is manufactured from High Density Polyethylene (HDPE) with 20 micron nominal bed support porosity Tubing connections are male Luer locks Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements …

  • PVDF Membrane Syringe Filters

    mdi Membrane Technologies

    … Applications: Sample filtration for HPLC and other analytical instruments Filtration of organic solvents and chemicals Available sizes: 4 mm, 13 mm, and 25 mm Available Pore Sizes: 0.2 µm and 0.45 µm Inlet: Female luer-lock Outlet: Male luer slip

  • Polypropylene Membrane Syringe Filters

    mdi Membrane Technologies

    … Sample filtration for HPLC and other analytical instruments Filtration of Aqueous solutions as well as organic solvents and chemicals Available sizes: 4 mm, 13 mm, and 25 mm Available Pore Sizes: 0.2 µm and 0.45 µm Inlet: Female luer-lock Outlet: Male luer slip

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.