Male Luer Lock

Cadence Science® male luer lock blanks can be used in a variety of designs where male luer fittings are essential. The blank male luer lock allows the user the option of modifying these components to their own requirements. Manufactured from brass to ensure durability, they can be plated to your…

Technical Features: fits 1/8 inch ID Tubing (0.125 inch, 3.2 mm)

Materials: PC, MABS

…Qosina part #80147 is a swabbable, needleless injection site equipped with a male luer lock connector. Made of tinted polycarbonate and silicone, this luer-activated valve is opened by the stem of a male luer. Once connected to the female luer lock, the valve is open, allowing for flow of fluids.

…Kel-F male Luer lock termination to fit removable needle syringes, 25muL-2.5mLCat. No. 509353 is a push-button with Kel-F male Luer lock termination. This fits 5 mL to 2 liter syringes with removable Luer Lock or removable needle.Cat. No. 509361 is a Luer Lock valve for any Luer Lock and Luer Tip…

Heavy-duty nylon, 3-way control with locking fittings on all ports. 

…adapter connects to the end of TLL and LT syringes and can be used for sample spiking. The MTB sampling valve also connects to the ends of a TLL or LT syringes to create sample lock syringes. Finally the Luer adapters convert Large Hub Removable Needle (RN) syringes to various luer terminations.

… 304 stainless steel needle Standard 2” length Use with Luer Tip and Luer Lock syringes sold without needle or for Luer adapters. Nickel-plated brass or Kel-F (CTFE) hubs fit both male and female Luer connectors.They allow quick change of needle and use of different gauge and/or…

Nylon stopcock features 3-way control with female Luer-Lock inlet and male Luer-Lock outlet ports.

A polycarbonate/acetal copolymer on-off control with female Luer-Lock inlet and male Luer-Lock outlet ports.

Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

Adapter has a 1/4 " -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

…fixed bed length configurations are available: Luer Lock, non-jacketed: constructed with fixed polypropylene end caps, polyethylene bed supports, and Luer Lock inlet and outlet fittings. The Luer Lock connections on these columns are male. The polyethylene bed support has a nominal pore size…

…with plastic male luer lock adapters. Uniquely designed to facilitate easy cleaning and maintenance. Male Luer Lock (MLL) – male luer slip with a threaded sheath for a secure fitting to a female luer lock. Male Luer (ML) – male luer slip that fits with a female luer. For…

Manufactured from polypropylene. Ideal for addition and withdrawal of contents via syringe. 45mm cap has 33mm hole to accommodate 45mm septa or 45mm port assembly. 32mm cap has 20mm hole to accommodate 32mm septa or 32mm port assembly. Size: 32mm & 45mm O-ring seal Male luer lock

Manufactured from polypropylene. Ideal for addition and withdrawal of contents via syringe. 45mm cap has 33mm hole to accommodate 45mm septa or 45mm port assembly. 32mm cap has 20mm hole to accommodate 32mm septa or 32mm port assembly. Size: 32mm & 45mm O-ring seal Male luer lock

…valves including the SmartSite™ valve or VersaSafe™ split septum injection ports. Gravity set check valve flow regulator slide clamp(s) 2 NAC-y needle-free valve(s) 7", 54" from spin male luer lock. Not made with DEHP. 15 drop L: 75 in L: 191 cm content sterile.

…nylon unions; 2 x 1/4"-28 PP luer locks female; 1 x 1/4"-28 PP luer locks male; 1 x 1/4"-28 PP luer tip male CHROMABOND® Flash Stand Alone Kit consists of: 1 x 1/4"-28 PP luer lock female; 1 x 1/4"-28 PP luer lock male; 2 x 1/8" ETFE ferrules; 2 x 1/4"-28…

…transfer caps have two ports. One port ends in a 0.2µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a Male Luer Lock. The dip tube reaches all the way to the bottom of the flask for easy aseptic transfer of your liquid handling processes.

…Effective Filtration Area (cm2): 1.09 Pore Size (µm): 0.45 µm Holdup Volume (µl): Sample Volume (mL): Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50°C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: …

…Effective Filtration Area (cm2): 5.39 Pore Size (µm): 0.22 µm Holdup Volume (µl): Sample Volume (mL): Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 6 bar Typical Applications: High particulate…

…port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch (6.4mm) OD chemically resistant, heat sealable flexible tubing, ending in a male luer lock (MLL) closed with a female luer sealing cap

…Area (cm2): 1.09 Pore Size (µm): 0.45 µm Holdup Volume (µl): <25 Sample Volume (mL): <10 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50°C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

…Area (cm2): 1.09 Pore Size (µm): 0.22 µm Holdup Volume (µl): <25 Sample Volume (mL): <10 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50°C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

…Effective Filtration Area (cm2): 5.39 Pore Size (µm): 0.45 µm Holdup Volume (µl): Sample Volume (mL): Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 6 bar Typical Applications High particulate…

…Area (cm2): 4.08 Pore Size (µm): 0.45 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

…Area (cm2): 4.08 Pore Size (µm):0.22 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature: 50 °C Maximum Operating Pressure: 87 psi (6.0 bar) at 20 °C Typical Applications: HPLC…

…have two ports. One port ends in a 0.2 µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a male Luer lock. The dip tube reaches all the way to the bottom of the flask for easy aseptic transfer of your liquid handling processes. Disclaimer :…

… Bed support is manufactured from High Density Polyethylene (HDPE) with 20 micron nominal bed support porosity Tubing connections are male Luer locks Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements …