Magnetic Air Stirrer

…unit Stirrer is powered by a low pressure air supply that eliminates the sparking hazard from electrical sources. Compact unit operates using only 3 to 8 psi (21-55 kPa) air pressure and it is useful for stirring vesseals up to 1 liter. Tubing is provided to connect to an air supply. …

…Corrosion-proof Speed range: 0-800 rpm Usable in hazardous locations, baths, incubators or other areas where electric stirrers are impractical Operates on water or air pressure between 15 and 40 psi. Knob regulates air/water pressure to control stir speed. Rated for 500 mL of water at…

…with brass bearings Completely immersible, allowing use in water baths Several stirrers can be connected in series Housing, 3” diameter x 3/4” thick, encases driving magnet, which is mounted in vaned rotor. Maximum width 3 1/2”. Inlet and outlet tubes take…

The Cool Stir® Large Volume Magnetic Stirrer efficiently stirs fluid volumes from 10 liters up to 208 liters (2.5 to 55 gallons). Stirring speed is continuously changeable to around 600 rpm (maximum operational rpm depends on volume and density) delivering torque for mixing through powerful…

…with variable-speed control, allowing the user to create the most dynamic and violent mixing action with no formation of air bubbles Can be used as a regular stirrer by simply selecting the standard mode. Specially designed to handle the more viscous material. Direct driven and delivers…

…chamber.  Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc.  Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall.  A microprocessor…

…the chamber.  Two internal convenience outlets allow easy connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc.  Fans take air from the chamber top, pass it over the 900 watt heater and re-inject it into the chamber on the bottom back wall.  A microprocessor…

…chamber.  Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc.  Fans take air from the chamber top, pass it over the 900 watt heater and re-inject it into the chamber on the bottom back wall.  A microprocessor…

…(CPRA). One internal convenience outlet on top allows simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the back wall. A microprocessor…

…chamber.  Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc.  Fans take air from the chamber top, pass it over the 900 watt heater and re-inject it into the chamber on the bottom back wall.  A microprocessor…

…chamber.  Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc.  Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall.  A microprocessor…

…chamber.  Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc.  Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall.  A microprocessor…

…chamber.  Two internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc.  Fans take air from the chamber top, pass over the 1100 watt heater and re-inject it into the chamber from the bottom back wall.  A microprocessor…

…to grow your insect culture line for expression. Consist of: 7785-d2005 digital 5-position magnetic stirrer, 115v 1965-03000 micro-carrier spinner flask complete, 3l 1965-20003r 2-port assembly, 3l 7808-10004 gas blending stand 7725-00120 air supply pump, 115v 7800-10050 silicone tubing, 1/4" id

…line for expression. Consist of: 7785-p2015 process 5-position magnetic stirrer, 230v 1965-13000 micro-carrier spinner flask, 3l 1965-60030 iob impeller assembly, 3l 1965-20003r 2-port assembly, 3l 7808-10004 gas blending stand 7725-00120 air supply pump, 115v 7800-10050 silicone tubing, 1/4" id

…to grow your insect culture line for expression. Consist of: 7785-p2005 process 5-position magnetic stirrer, 115v 1965-03000 micro-carrier spinner flask complete, 3l 1965-20003r 2-port assembly, 3l 7808-10004 gas blending stand 7725-00120 air supply pump, 115v 7800-10050 silicone tubing, 1/4" id

…needed to grow your insect culture line for expression. 7785-p2015 process 5-position magnetic stirrer, 115v 1965-03000 micro-carrier spinner flask complete, 3l 1965-20003r 2-port assembly, 3l 7808-10004 gas blending stand 7725-00120 air supply pump, 115v 7800-10050 silicone tubing, 1/4" id

…to grow your insect culture line for expression. Consist of: 7785-d2015 digital 5-position magnetic stirrer, 230v 1965-03000 micro-carrier spinner flask complete, 3l 1965-20003r 2-port assembly, 3l 7808-10004 gas blending stand 7725-00120 air supply pump, 115v 7800-10050 silicone tubing, 1/4" id

…line for expression. Consist of: 7785-p2005 process 5-position magnetic stirrer, 115v 1965-13000 micro-carrier spinner flask, 3l 1965-60030 iob impeller assembly, 3l 1965-20003r 2-port assembly, 3l 7808-10004 gas blending stand 7725-00120 air supply pump, 115v 7800-10050 silicone tubing, 1/4" id

…speed stirring control and higher stirring speeds. Uniform stirring is provided via a motorised rotating magnet assembly positioned to provide maximum magnetic flux linkage to rotate the stirrer bars in each reaction vessel. Key Features Same OMCA controller accommodates different capacity…

…time until programmed off - up to 96 hours. Continuous gentle air circulation in chamber ensures consistent and uniform conditions. Unit is supplied with a two-sided magnetic platform and is easily cleaned or decontaminated. Magnetic platform may be removed to place spinner flasks or beakers on…

…for expression. Consist of: 7785-d2015 digital 5-position magnetic stirrer, 230v 1965-13000 micro-carrier spinner flask, 3l 1965-60030 iob impeller assembly, 3l, 1965-20003r SST 2-port assembly, 3l 7808-10004 gas blending stand 7725-00120 air supply pump, 115v 7800-10050 silicone tubing, 1/4" id

…for expression. Consist of: 7785-d2005 digital 5-position magnetic stirrer, 115v 1965-13000 micro-carrier spinner flask, 3l 1965-60030 iob impeller assembly, 3l, 1965-20003r SST 2-port assembly, 3l 7808-10004 gas blending stand 7725-00120 air supply pump, 115v 7800-10050 silicone tubing, 1/4" id

…stirring environments with Thermo Scientific™ Cimarec™ i Maxi Stirrers, 100% maintenance– and wear–free hermetically sealed units. With powerful magnets and no moving parts, these inductive-drive stirrers are designed to go into water baths and incubators. Telemodul…

…Drums, Magnetic Stirrers, etc.  Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled…

…Drums, Magnetic Stirrers, etc.  Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled…

…Drums, Magnetic Stirrers, etc.  Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled…

…Drums, Magnetic Stirrers, etc.  Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled…

…Drums, Magnetic Stirrers, etc.  Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled…

…Drums, Magnetic Stirrers, etc.  Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled…

…glass flask, Teflon® and glass impeller assembly, and Teflon and Silicone-lined top cap. It is designed for use with Wheaton Micro-Stir magnetic stirrers. The entire unit may be autoclaved. Wheaton also offers a non-breakable stainless steel shaft assembly kit as a retrofit to your Celstir (see…