Luer Fittings

Compare Tool

Select up to 3 products

Luer Fittings
1 - 32 of 103
Sort
View
Show
  • Manufactured of animal-free natural polypropylene, these luers meet Class VI specifications. Luers offer superior chemical resistance and are suited for ETO and gamma sterilization. (Not recommended for autoclaving).

  • CHROMAFLEX® Fittings

    DWK Life Sciences (Kimble)

    Tubing nuts and ferrules are used to make connections between the tubing and the end fittings of CHROMAFLEX® columns.

  • … 304 stainless steel needle Standard 2” length Use with Luer Tip and Luer Lock syringes sold without needle or for Luer adapters. Nickel-plated brass or Kel-F (CTFE) hubs fit both male and female Luer connectors.They allow quick change of needle and use of different gauge and/or…

  • …filtration, and large volume processing. Provide a secure seal for both the inlet and outlet of TELOS flash columns with the luer cap and plug. TELOS column luer cap can be used in conjunction with the appropriate size column for either room temperature reactions or short-term compound…

  • Adapters, Luer

    Chemglass

    …with vacuum manifolds or any other air sensitive transfer applications. Adapter can also be used with standard luer lock stainless steel needles; See CG-3075. Adapters are supplied with a CG-1055-20 female luer to 1/4" - 28 peek fitting. Ferrules, nuts and tubing must be ordered separately.

  • Luer Adapter for Winged Infusion Sets

    Terumo Medical Corporation

    Sterile and disposable, adapters fit into standard infusion sets transforming them into winged blood collection sets. This allow multiple draws into evacuated tubes. Accepts standard tube holders.

  • Use a luer lock valve adaptor to connect a luer lock fitting to a Rheodyne or Valco valve.

  •   Barrel and plunger are individually ground for precise fit Similar to Micro-Mate except for interchangeability Conform to Federal Specifications GG-S-921B and GG-S-935 1/4 cc, 1/2 cc and 1 cc syringes graduated in minims as well as cubic centimeters. Capacity and…

  • Male Luer Lock Blanks

    Cadence Science

    luer fittings are essential. The blank male luer lock allows the user the option of modifying these components to their own requirements. Manufactured from brass to ensure durability, they can be plated to your specifications. These male luer lock blanks can be mated with any standard female luer to…

  • Luer Tip Polypropyl

    DWK Life Sciences (Kimble)

    Lower column fitting with a luer outlet for Disposaflex™ Chromatography Columns. Luer tip only Standard taper joint: 14/20

  • Luer Tip Polypropyl

    DWK Life Sciences (Kimble)

    Lower column fitting with a luer outlet for Disposaflex™ Chromatography Columns. Includes recess to hold polyethylene bed support or glass wool plug Case of 100

  • Blunt end (90° cut) stainless steel needles with a luer lock fitting, used for nitrogen gas blowdown. Available with chrome plated or polypropylene hubs. Optional FEP coating protects against corrosive solvents. 4 inches long 16 or 19 gauge

  • Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

  • Disposable Plastic Syringes

    National Scientific

    For use with syringe filters No rubber or synthetic plunger gaskets No silicone oil lubricant Luer-Slip or Luer Lok® fittings Two-part, all plastic syringes have polypropylene barrels and either polypropylene or polyethylene plungers for a wide range of chemical…

  • Heavy-duty nylon, 3-way control with locking fittings on all ports. 

  • …system fittings or 1/4"-28 UNF ports to Luer connectors Cap adapter replaces the colored cap on the cap system fittings and valves to convert it to a male or female Luer connection. The 1/4"-28 UNF adapters fit on 1/4"-28 UNF flat bottom ports of cap system fittings and valves.

  • Adapter has a 1/4 " -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

  • Hypodermic Needles

    Cadence Science

    …304 stainless steel tubing which must pass our rigorous inplant quality control prior to acceptance and use. Standard luer hubs comply with luer taper specifications ISO 594. This assures an interchangeable fit mating with luer slips and luer locks. Contoured hub cavity facilitates cleaning.

  • SurGuard2™ Safety Hypodermic Needles

    Terumo Medical Corporation

    …Sheath Bevel-up, sheath right needle orientation, especially useful for low-angle injections Ratchet mechanism, allows for precise positioning of sheath so as not to obscure injection site Standard hub fits all luer lock and luer slip syringes Large selection of sizes from 18G to 30G

  • Make solid connections in low-pressure applications Manufactured from inert polymers Ensure chemical compatibility with the fluid passing through A wide variety of options available

  • Serially Numbered, Luer Slip Luer slip tip Barrel and plunger individually ground for precise fit and serially numbered Syringes are individually calibrated and have glass Luer slip tip. 1/4 cc, 1/2 cc, 1 cc and 2 cc syringes graduated in minims as well as cc. 1 cc syringe has…

  • Make solid connections in low-pressure applications Manufactured from inert polymers Ensure chemical compatibility with the fluid passing through A wide variety of options available

  • …while bonded phases such as C18, Amino and Diol contain spherical 50 µm silica. EcoFlex Alumina cartridges contain irregular 60 µm neutral, basic or acidic media. FlashPure EcoFlex Lok cartridges use a Luer lock connection for secure fitting on systems requiring this connection.

  • Technical Features: fits 1/8 inch ID Tubing (0.125 inch, 3.2 mm)

  • …are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it…

  • …needle syringes. 1186G40 (031910): Push button valve with Luer Lock termination. Suits 5mL-2L syringes with removable Luer Lock or removable needle. 1186G41 (031915): Luer Lock valve for any Luer Lock and Luer Tip syringes or other Luer devices. Ideal when fast needle changeover is needed.

  • …are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it…

  • …interchange a wide variety of fittings, adapters and tubing, including male and female luers, FEP tubing assemblies, and adapters which thread directly into the valve providing an endless variety of valve configurations for any flow application. Hamilton (HV) fittings and adapters are installed…

  • …are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.