Luer Cap

Compare Tool

Select up to 3 products

Luer Cap
1 - 32 of 40
Sort
View
Show
  • Use to close Luer port. Polypropylene. Synonyms: Luer Plugs & Caps

  • BD Luer-Lok™ S/D female L/L female connection cap adapter Sterile, single use (50/ca)

  • …and are rated at a maximum pressure of 15psi (1 bar). Five configurations are available: A - Luer-Lock, Non Jacketed: Fixed polypropylene end caps, polyethylene bed supports, Luer-Lock inlet and outlet fittings.B - Luer-Lock, Jacketed: Same as A (above), with a borosilicate glass jacket surrounding…

  • …Omnifit cap system fittings or 1/4"-28 UNF ports to Luer connectors Cap adapter replaces the colored cap on the cap system fittings and valves to convert it to a male or female Luer connection. The 1/4"-28 UNF adapters fit on 1/4"-28 UNF flat bottom ports of cap system fittings…

  • … EVA Port 1:  Male luer connector with 1/8" barb + cap, 2' length 1/8" I.D. x 1/4" O.D. chemically resistant, heat sealable flexible tubing, slide clamp Port 2:  Male MPC connector with 3/8" barb + cap, 6" length 3/8" I.D. x 5/8"…

  • …glass. Four different fixed bed length configurations are available: Luer Lock, non-jacketed: constructed with fixed polypropylene end caps, polyethylene bed supports, and Luer Lock inlet and outlet fittings. The Luer Lock connections on these columns are male. The polyethylene bed support…

  • … Available in 10L and 20L sizes Film type: EVA Port 1:  Female MPC connector with 1/4" barb + plug, Slide clamp Port 2:  Male MPC connector with 1/4" barb + cap, Slide clamp Port 3:  Vinyl cap, Swabbable valve, Female luer with barb

  • …male Luer fittings to connect other tubing sizes. Luer port lets you also connect a syringe for liquid removal. Anti-twist cap design allows the PTFE body to spin freely within the outer cap. No more twisted tubes and no need to disconnect fluid lines before unscrewing the cap. Caps are rated…

  • …male Luer fittings to connect other tubing sizes. Luer port lets you also connect a syringe for liquid removal. Anti-twist cap design allows the PTFE body to spin freely within the outer cap. No more twisted tubes and no need to disconnect fluid lines before unscrewing the cap. All caps are…

  • …port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch (6.4mm) OD chemically resistant, heat sealable flexible tubing, ending in a male luer lock (MLL) closed with a female luer sealing cap

  • Prevent chemical vapors from escaping from solvent containers Use traps with Luer connection with T-series solvent waste caps without valve and filter. Traps with 1/4"-28 UNF(M) connection works with caps with vent. Traps with UNF connection feature an indicator strip that changes color as…

  • …male Luer fittings to connect other tubing sizes. Luer port lets you also connect a syringe for liquid removal. Anti-twist cap design allows the PTFE body to spin freely within the outer cap. No more twisted tubes and no need to disconnect fluid lines before unscrewing the cap. Caps are rated…

  • …filtration, and large volume processing. Provide a secure seal for both the inlet and outlet of TELOS flash columns with the luer cap and plug. TELOS column luer cap can be used in conjunction with the appropriate size column for either room temperature reactions or short-term compound…

  • Carrier/Diluent Reservoir (1) and Internal Standard Reservoir (1), 2 L each, with luer connectors and caps, precleaned.

  • …to be used as an HPLC reservoir. Caps have two holes to accomodate 1/8" tubing and one hole that accepts a standard luer inner joint. Caps are made from polypropylene and the inserts are made from Tefzel. Complete cap assemblies consists of the cap, tefzel insert, (2) plugs for the 1/8"…

  • Unit includes 500 mL plastic bottle with 288 mm cap assembly with bottle inlet tubing and Luer fitting, 3 dispense volume spacers, one 30 in. long Tygon remote inlet tubing.

  • Chemical resistant polypropylene construction Integrity testable (Bubble Point Method) Air vent on inlet with luer lock cap Nylon or Polypropylene (PP) filter media Whatman in-line filter/degassers (IFD) connect directly into an HPLC line to simultaneously filter and degas the mobile phase as…

  • …mobile phases without expensive stand-alone degassing equipment Air vent on inlet with luer lock cap Integrity-testable with the bubble point method End fittings included – for replacement rings and caps, see our IFD end fitting kit Faster than traditional mobile phase preparationChemically…

  • Metallocene Collection Bags

    Corning cellgro

    … Film type: Metallocene Port 1:  24" length 1/4" I.D. x 3/8" O.D. PCMGS tubing, female Luer with 1/4" barb, cap, slide clamp Port 2:  24" length 1/4" I.D. x 3/8" O.D. PCMGS tubing, male Luer with 1/4" barb, cap, slide clamp

  • …O-Ring to make a compression seal in the Ace-Thred on Vessel. Other end of adapter has a 1/4" FNPT thread that allows connection of a 2.5mm bore PTFE shut-off valve with a luer extension. Supplied with a solid cap GL thread. Complete item consists of Vessel, PTFE Adapter, CAPFE O-Ring, and Valve.

  • Extract hydrophobic or polar organic analytes from aqueous matrices TELOS nonpolar (reversed phase) SPE columns are available in a wide range of sorbents for extraction of hydrophobic and polar analytes. Select columns with endcaps for applications requiring minimal secondary silanol…

  • IV Catheters

    EXEL International

    …PTFE catheter assures stable flow and eliminates catheter tip kink during venipuncture Can be connected to syringe by removing filter cap to expose Luer taper end Use of hydrophobic membrane filter eliminates blood leakage Close and smooth contact between catheter tip and inner needle…

  • Spinner Flasks

    Corning

    …the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch OD C-Flex tubing ending in a male luer lock (MLL) connector closed with a female luer sealing cap Disclaimer : These products are not intended to mitigate the presence of microorganisms on surfaces or in the…

  • …L60 Pall Valve for multiple, simultaneous deliveries to microtest plates Manifolds are stainless steel, with removable Teflon ® end caps and Luer connector for attachment to pall valve Autoclavable Straight-type manifolds have a central intake shaft perpendicular to manifold and Teflon…

  • …Aqueous IFD have a polypropylene housing sealed by a security ring, fittings to accommodate 1/16”-1/8” tubing, and an air vent on the inlet with luer lock cap to enable priming. An in-line filter works on the principle of "bubble point" – the point of pressure at which gases will pass through a wet…

  • …using a CAPFE O-Ring to make a compression seal in the #15 Ace-Thred on Vessel. Other end of adapter has a 1/4" FNPT thread that allows connection of a 2.5mm bore PTFE shut-off valve with a luer extension. Supplied with a solid side prot cap. Complete: Vessel, PTFE adapter, CAPFE O-ring, and valve.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.