Luer Adapter

Compare Tool

Select up to 3 products

Luer Adapter
1 - 32 of 68
Sort
View
Show
  • … 304 stainless steel needle Standard 2” length Use with Luer Tip and Luer Lock syringes sold without needle or for Luer adapters. Nickel-plated brass or Kel-F (CTFE) hubs fit both male and female Luer connectors.They allow quick change of needle and use of different gauge and/or…

  • For industrial use only.

  • Make solid connections in low-pressure applications Manufactured from inert polymers Ensure chemical compatibility with the fluid passing through A wide variety of options available

  • …Omnifit cap system fittings or 1/4"-28 UNF ports to Luer connectors Cap adapter replaces the colored cap on the cap system fittings and valves to convert it to a male or female Luer connection. The 1/4"-28 UNF adapters fit on 1/4"-28 UNF flat bottom ports of cap system fittings…

  • Repeat Valve with Kit Adapts 7691K20 for continuous pipetting operations Pall valve has Luer slip fitting at dispensing tip; side arm takes 2 mm bore tubing for connection to suitable reservoir Valve diaphragm is ethylene polypropylene rubber Kit includes 7691L60 Pall…

  • …safety blood collection / infusion set is a sterile winged needle intended for single use connected to flexible tubing either with or without a Luer adapter. The winged needle has a safety mechanism which is activated after blood collection whilst the needle is, still in the vein, thereby providing…

  • Luer Adapter for Winged Infusion Sets

    Terumo Medical Corporation

    Sterile and disposable, adapters fit into standard infusion sets transforming them into winged blood collection sets. This allow multiple draws into evacuated tubes. Accepts standard tube holders.

  • These adapters transition between luer fittings and UNF or NPT threads. Both male and female luer connections are available. All threaded connections are male thread.

  • Luer, Bottom drip Adapter with or without flow regulator valve for use with ACE threaded columns. Shallow taper at upper end minimizes mixing below the packing support. Supplied with one FETFE O-Ring and one replaceable polyethylene packing support. For replacement packing support, either…

  • Make solid connections in low-pressure applications Manufactured from inert polymers Ensure chemical compatibility with the fluid passing through A wide variety of options available

  • Adapter, Luer

    Ace Glass

    84 cm of thin wall biological grade vinyl tubing connects an outer luer taper and an inner luer taper. Tubing is approx. 2 mm I.D. Connects to 5851 Stopcock, 5837 Bottom Drip Adapter. Six per package.

  • Luer Adapter

    DWK Life Sciences (Kimble)

    … Easy sample concentration and clean up Kontes luer adapter converts standard taper glassware to a luer joint. Adapter is available in most popular joint sizes and includes an integral vacuum connection. Adapter use a female luer for easy SPE cartridge or syringe connection. Size 1 hose…

  • BD Luer-Lok™ S/D female L/L female connection cap adapter Sterile, single use (50/ca)

  • Luer-to-Closed End Adapters

    Cadence Science

    316 Stainless For industrial use only.

  • Luer-to-Luer Adapters

    Cadence Science

    …when metal adapters are mated with plastic male luer lock adapters. Uniquely designed to facilitate easy cleaning and maintenance. Male Luer Lock (MLL) – male luer slip with a threaded sheath for a secure fitting to a female luer lock. Male Luer (ML) – male luer slip that fits…

  • Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

  • …10 µL, 25 µL, 50 µL, 100 µL, 250 µL, and 500 µL Terminations: Cemented Needle (N), Special Cemented Needle (SN), Removable Needle (RN), and Luer Tip (LT) Accessories: PB600-1 Repeating Dispenser, Reproducibility Adapter, Syringe Guide, and Digital Syringe

  • …a wide variety of fittings, adapters and tubing, including male and female luers, FEP tubing assemblies, and adapters which thread directly into the valve providing an endless variety of valve configurations for any flow application. Hamilton (HV) fittings and adapters are installed finger-tight (10…

  • …Use Holder is compatible with the entire BD Vacutainer® Blood Collection System: BD Vacutainer® Eclipse Blood Collection Needle, BD Vacutainer® Safety-Lok™ Blood Collection Set, BD Vacutainer® Push Button Blood Collection Set and BD Vacutainer® Multiple Sample Luer Adapter.

  • 1-Way PEEK Luer Adapters

    Cadence Science

    Made of inert PEEK and designed for quick, leak-proof connections. These adapters are economical and provide for flexibility of a variety of threaded connections. Meets ISO 594 Specifications.

  • Adapter has an outer luer joint that provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes or syringes to a standard taper inner joint. The adapter provides for easier sample concentration and clean-up while reducing the chances of cross-contamination. The addition of a…

  • Blood collection / infusion sets with female luer attached are used for routine venipunctures and infusion applications.

  • …a 40/35 female joint to adapt to microanalysis units. The valve is PVC with a PTFE stopcock. The 3-way PVC valve with PTFE stopcock allows the manifold to be vented to atmosphere when used under closed conditions without breaking the vacuum connection. The valves luer slip vent port accepts a…

  • …can be used for applications in Water Quality, Food and Beverage, and Pharmaceutical Industries. The standard cup accepts a No.8 or 8b stopper to adapt to various microanalysis units. The 3-place manifold can accomodate 90mm holders. Use 47mm or smaller holder units on the 6-place model. Valves have…

  • …and Luer Lock inlet and outlet fittings. The Luer Lock connections on these columns are male. The polyethylene bed support has a nominal pore size of 20 μm. Open-ended: constructed with fixed polypropylene ends, without jacket or end fittings. Requires at least one flow adapter. PTFE,…

  • Luer-to-Record Adapters

    Cadence Science

    For industrial use only.

  • Flex-Column Economy Chromatography Columns

    DWK Life Sciences (Kimble)

    …mm porosity polyethylene bed supports fixed in column outlets. The Luer-Lock fittings provided with each column, and a wide variety of optional adapters, valves and fittings make simple and versatile tubing connections possible. Standard Flex-Columns are available with inner diameters of 0.7, 1.0,…

  • Female luer adapter to 1/16 ftgs

    Agilent Technologies

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.