Low Protein Binding Tube

Compare Tool

Select up to 3 products

Low Protein Binding Tube
1 - 32 of 66
Sort
View
Show

MP Bio

  • …volumes, minimizing protein loss is essential for low protein concentrations to enable further analysis. Minimal protein/DNA binding = maximum recovery rate = minimal protein/DNA loss Low DNA binding tubes: centrifugation to 30,000 x g* (2 ml to 25,000 x g*) Low protein binding tubes:

  • …seal. The Cap can be partially closed to make constant opening and closing with your thumb easy and secure. Available in low binding for dealing with proteins and other high viscosity samples Certified free of DNA, DNase, RNase, and endotoxins (pyrogens) Frosted exterior wall and…

  • 0.5mL SuperSlik® Polypropylene Microcentrifuge Tubes with Low Protein Binding surface. Include flat caps and writing surface. In resealable bags With flat snap caps, side graduations, and frosted writing surface Ultra low fluid retention ATP, RNase/DNase and Endotoxin Free…

  • …Polypropylene Microcentrifuge Tubes with Low Protein Binding surface for use with viscous samples. Designed to improve yields. Include flat caps and writing surface. In resealable bags. With flat snap caps, side graduations, and frosted writing surface Ultra low fluid retention ATP,…

  • Cryobank And Bank-It Vials

    Thermo Scientific Nunc

    … CryoTubes have a low binding surface for high sample recovery with low concentration samples. Cryobank vials are for cells and proteins. Bank-It vials are for DNA samples. Working volumes are 0.5 or 1.0 mL. Tubes are for use in the vapor phase of liquid nitrogen and 169 tubes can be stored in a…

  • These Costar® low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • Biotube System

    Simport

    …as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are made of the highest quality polypropylene to assure low protein binding. Rack cover has an alphanumeric numbering system for identifying each tube and…

  • Vivaspin 2

    Sartorius

    …membrane (HY) for extremely low protein binding; and Cellulose Triacetate (CtA) with high hydrophilicity and very low non specific binding. Vivaspin 2: Sample concentration from 400 µl to 2ml in swing bucket or fixed angle rotors accepting 15 ml centrifuge tubes. Available in PES, CtA, and…

  • …non-cytotoxic and non-hemolytic Contains no phthalate plasticizers or peroxides that can leach out into transported fluid Low binding suface to minimize absorption of proteins and food products Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures Durometer…

  • …polished interior reduces binding of proteins. Capp PCR Tubes line comprises of a lean portfolio of 0.1ml and 0.2ml tubes with plug caps, strips of 8 tubes, strips of 8 caps, plates and optical adhesives. Expell PCR strip tubes are available as 0.1 and 0.2mL tubes. These tubes are also available…

  • RED 660™ Protein Assay

    G-Biosciences

    …reagent. The binding of protein to the dye-metal complex under acidic conditions results in a change of color from reddish-brown to green and this change in color density is proportional to protein concentration. The color change is a result of deprotonation of the dye-metal complex at low pH, which…

  • …to create a strong seal in the same location, every time.   Low binding! Biotix low retention technology reduces the amount of sample lost in the tip when pipetting. Great for use with loading dyes, proteins and DNA to increase your experiments accuracy and yield. Clean Delivery…

  • Slightly greater clarity Smooth surface; low protein binding levels Preferred by pharmaceutical & biotechnology industries Fewer potential leachables USP Class VI FDA Compliant

  • …to create a strong seal in the same location, every time.   Low binding! Biotix low retention technology reduces the amount of sample lost in the tip when pipetting. Great for use with loading dyes, proteins and DNA to increase your experiments accuracy and yield. Clean Delivery…

  • Vivaspin Turbo 15

    Sartorius

    low protein binding; and Cellulose Triacetate (CtA) with high hydrophilicity and very low non specific binding. Vivaspin TURBO 15: The fastest ultrafiltration device in the market! Sample concentration from 2 to 15 ml in swing bucket or fixed angle rotors accepting 50 ml centrifuge tubes. Twin…

  • …Pharmacopoeia (USP) toxicity tests. Low protein binding: Corning engineers and scientists are continually searching for materials and processes that minimize labware-induced interference, such as protein binding. Quality packaging: Falcon tubes, in addition to offering bioanalytical-grade…

  • For filtration of critical biological and tissue culture solutions Inherently hydrophilic Low extractables Low protein binding Biosafe Sterile Capsule contains two layers of polyethersulfone (PES) membrane. The device is supplied pre-sterilized and has a vent to evacuate any air to allow…

  • These Costar® 1.7mL low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • …non-pyrogenic and non-hemolytic Contains no phthalate plasticizers or peroxides that can leach out into transported fluid Low binding surface minimizes absorption of proteins and food products Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures Durometer…

  • …similar to Tygon® Very low protein binding Heat sealable, weldable Economical tubing Applications: General-purpose lab uses requiring high performance and long life. Characteristics: Exceptional tensile and tear strength; good biocompatibility; low gas permeability; and a…

  • MF75™ Series Bottle Top Filters

    Thermo Scientific Nalgene

    …Side-arm with quick-disconnect tubing adapter. Nalgene PES: The best choice for cell culture Polyethersulfone (PES) is the ultimate tissue culture membrane. It’s fast and clean. PES is low protein binding, so there is less chance of removing critical protein from your media. It is…

  • Micro Centrifuge tubes are manufactured using high purity virgin Polypropylene (PP) conforming to US FDA 21 CFR free from natural rubbers and heavy metals. Advanced superhydrophobic material conforming retention level 10 time lesser and reduces protein and nucleic acid binding, resulting in a better…

  • …autoclavable. Ideal for DNA, protein work and PCR, SlipTech™ disposables are also useful in any application where optimal yield and minimal sample loss are required. Advanced molding, quality control and packaging systems ensure that all SlipTech™ tubes and tips are free of enzyme and…

  • Autofil® Centrifuge Tube Stand

    Foxx Life Sciences

    Foxx Life Sciences' Centrifuge Tube Stands are intended for use with centrifuge tubes. They are made from Class VI, FDA Grade, BPA-Free Polystyrene, and are conveniently sold in packs of 5. Autofil tube stand can hold one 15ml or 50ml tube Can also be used with the Autofil Centrifuge…

  • Low protein binding, 50 mm diameter cellulose acetate (CA) membrane, recommended for use with samples requiring highest protein yields. Eliminates unneccesary transfer and minimizes contamination by filtering directly into a 50-mL centrifuge tube. The polypropylene centrifuge tube is supplied…

  • …of thin-walled tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. For the tubes we use polypropylene, which provides the most efficient heat transfer, as well as an inert surface with low binding capabilities for nucleic acids, proteins and other molecules.…

  • …harder-to-filter samples. Polyethersulfone (PES) membranes Hydrophilic PES membranes are designed for stability in low pH, have low levels of extractables, and exhibit low protein binding, making them suitable for many aqueous and organic solvents. PES membranes allow higher liquid flow than…

  • EZ Flip™ Conical Centrifuge Tubes

    Thermo Scientific Nunc

    …chemical-resistance, low protein binding and visibility of contents. Improved tube and cap design increases mechanical strength to withstand aggressive centrifugal forces. The 15 mL tube has a mximum RCF of 8500 x g while the 50 mL tube’s maximum RCF is 9500 x g. Tubes are graduated and…

  • …peroxide-cured tubing Smooth surfaces; lower protein binding levels Fewer potential leachables Ideal for pharmaceutical and biotechnology use Applications: Pharmaceutical, biotech, peristaltic pumping, and food applications. Characteristics: Excellent heat resistance, low

  • …to create a strong seal in the same location, every time.   Low binding! Biotix low retention technology reduces the amount of sample lost in the tip when pipetting. Great for use with loading dyes, proteins and DNA to increase your experiments accuracy and yield. Clean Delivery…

  • …larger volumes of harder-to-filter samples. Polyvinylidene difluoride (PVDF) membranes PVDF membranes are designed for high tensile strength, high solvent resistance, and low protein binding, making them suitable for biomedical filtration, sterilization filtration, and HPLC sample preparation.

  • …232-994-9 MDL Number: MFCD00130541 Preparation Note Aprotinin is freely soluble in water (>10 mg/ml) and in aqueous buffers of low ionic strengths. Dilute solutions are generally less stable than concentrated ones. Solution stability is pH dependent; a range of 1-12 can be…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.