Liquid Flow Meter

Compare Tool

Select up to 3 products

Liquid Flow Meter
1 - 24 of 24
Sort
View
Show
  • Ideal for fluid transfer, dispensing, and metering applications in laboratory, process and wash-down environments Flow rate: 0.006 to 3400 mL/min NEMA 4X (IP66) rated housing Easy-to-clean Brushless, maintenance-free motor Features a 316 stainless steel housing. Use this drive in…

  • …and direct reading in one easy-to-read meter Accuracy up to ±2% of reading Interchangeable scales to customize applications Extremely low pressure drops for procedures with critical pressure values Precision valves Each meter includes correlation charts for air and…

  • Adaptable to virtually any flow measuring application Flow rate and total displayed Frequency output for remote instruments CE certified for intrinsic safety Measures from 0.3 to 20 ft/sec with an accuracy of ±0.1% of reading. Totalizes flow to an accuracy of…

  • Flow indicators give precise visual indication of the flow velocity of liquids or gases being transported through hose connections. The flow indicator with impeller functions in both directions and in any position. The impeller starts to rotate at a flow rate about 150 ml/min (liquids).

  • …full range FM Approved Flow measuring range of 1 to 20 ft/sec NIST certified Rotor-X Flow Sensor Makes creating a flow monitoring/ controlling system easy. Just match it with either a transmitter, controller or monitor and have an operational flow system in minutes. Sensor is…

  • …capability, see 5080K60 series). Specially designed Teflon® stops allow standard taper joints with precision bore ends to be attached to meter; O-ring seal makes this connection vacuum tight. Standard flowmeters feature small outside diameters, require minimal space and fit into streamlined…

  • FM110 Flow Monitors

    Electrothermal (Cole-Parmer)

    …aqueous liquids used in heating and cooling applications and process control. The turbine assembly is comprised of components made from chemically resistant materials such as PVDF, sapphire, ceramic and viton. 2 versions of the Flow Monitor are available, covering 2 different flow rates as…

  • …FH100X peristaltic pumps are designed specifically for easy repeatability, fluid transfer, metering, and worry-free performance in a variety of life science and laboratory applications. The broad flow range capability of these pumps make them ideal for laboratory to pilot process scale-up…

  • Flow Indicators

    Dynalon

    …I.D.   Flow Indicator (1211Y77) Product Dimensions (l x w x h) : 4x0.553x2.254in This flow indicator is transparent, leakproof, ultrasonically molded and fitted with a  polypropylene ball. It allows an immediate visual indication of gas or liquid flow by means of the…

  • All fittings are slip-on tee style except for Thomas numbers 5075C55 to C59 which are weldolet weld on style.

  • Flow-Watchman Liq Flowmeter

    DWK Life Sciences (Kimble)

    A device for the visual indication of liquid flow. Flow indication is visible at a distance. Usable with water down to a flow range of approximately 100 mL/minute, which is adequate for even the smallest cold finger condensers. The upper flow limit is in excess of 1 liter/minute. Speed of ball…

  • Chemically compatible, Teflon® and glass construction Accuracy ±2% of reading Calibrated/correlated Repeatability ±1% Choose shielded flowmeters for use at higher pressures. Otherwise similar to 5080K01 series. Clear polycarbonate shield adds strength and…

  • Flow Indicator (5084A04) Clear polystyrene Provides immediate visual indication of water, air or gas flow, indicating continuity and relative flow rate Minimum flow rate to actuate the ball with water is 50 mL/min. in horizontal position, 140 mL/min. in vertical position. With…

  • Flow indicators give precise visual indication of the flow velocity of liquids or gases being transported through hose connections. The flow indicator with impeller functions in both directions and in any position. The impeller starts to rotate at a flow rate about 150 ml/min (liquids).

  • Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm, and has an internal needle valve which permits for fine control of gases or liquids added to reactions. Hose connection has an O.D. of 8mm at the middle serration.

  • Can measure flow rates down to 0.3 ft/sec NIST certified ±0.5% repeatability over full range For use in powered flow systems Flow measuring range of 0.3 to 20 ft/sec Ideal for measuring flow in piping systems with extremely low velocities. Combines the “Hall…

  • Synthware flow control adapter with metering stopcock. The serrated hose connection is turned 90 degrees to the standard taper inner joint. Provides on/off control with the main stopcock and precise control of liquids or gasses with the needle valve.

  • …stroke length and frequency Very low minimum outputs possible with 200:1 turndown ratios Maximum flow rates of up to 34 LPH at 60 psi Electromagnetic diaphragm metering pumps operate with high accuracy and reliability due to the simplicity of their operation. The only moving part…

  • …mounting hardware is supplied with each meter, and tripod bases are available for bench top applications. Calibrated tables for air and water are included with each meter. Flow analysis software is available (Thomas number 5080L82) to generate accurate flow tables for an infinite number of…

  • …– no contact of liquid and mechanical parts Tubing (2 diameters available) resists most chemicals Reliable Performance Electronic speed control Able to pump from 10 meters depth Choice of Models SP 311/2 with variable flow rate 2 - 35 liters/minute…

  • pH Controller and Pump

    Milwaukee Instruments

    …precise flow of the peristaltic pump allows you to maintain ideal pH values in your tank. After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to…

  • …against hazardous spills. The material features a high-quality, smooth, absorbent Whatman paper which quickly absorbs liquid spills and a laminated polyethylene layer that prevent flow through to the working surface. After use the sheet is incinerated or disposed of acording to local regulations. …

  • … HiFlow model has a stronger flow rate to work reliably with up to 8-channels, even with 4 channels empty HiFlow model includes quick disconnects to allow easy removal, emptying and replacement of the bottle Low noise level (76dbs or less at 1 meter); minimal pump vibration Chemical…

  • …causing pitting in ferrous systems such as high-pressure boilers and deep well oil recovery equipment. To prevent costly corrosion damage, the liquids in contact with the metal surfaces must be treated, usually by a combination of physical and chemical means. Deaeration can reduce the dissolved…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.