Liner

Compare Tool

Select up to 3 products

Liner
1 - 32 of 1274
Sort
View
Show
  • Liner O-Rings

    Agilent Technologies

    Agilent fluorocarbon liner O-rings Liners are sealed in the inlet with O-rings or graphite seals Graphite seals are used when inlet temperatures exceed 350°C Fluorocarbon O-ring seals are easier to replace than graphite that deforms and flakes apart Pre-cleaned, then…

  • Absorbent Liner

    Jaece

    … Absorbs spills Retains liquids Soft and durable Can be cut to size EZROLL Absorbent Liner Dispenser Rack Fits any roll up to 26" width and 20" diameter. Mount on any secure surface. Heavy duty steel cnstruction. Fits perfectly with Jaece Absorbent Liner Rolls.

  • Splitless Liner 2mm

    PerkinElmer

    Splitless Liner 2mm; 2mm I.D x 5.0mm O.D x 100mm length

  • Splitless Liner 1mm

    PerkinElmer

    Splitless Liner 1mm; 1mm I.D x 6.2mm O.D x 92.1mm length

  • Wide-Bore Quartz Liner

    PerkinElmer

    Wide-Bore Quartz Liner

  • Wide-Bore Glass Liner

    PerkinElmer

    Wide-Bore Glass Liner

  • Inlet Liner Sealing Rings

    SGE

    Manufactured for specific instruments Provide better seal Sized for appropriate liners Seals are manufactured to fit specific inlet liners for specific instruments to provide the best possible seals for reproducible conditions. Graphite seals are recommended for use at…

  • Inlet Liner Removal Tool

    Restek

    Easily remove liner from injector—no more burned fingers Made from high-temperature silicone Won’t chip or crack the liner

  • Shimadzu Liner Removal Tool

    SGE

    Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • Liner Solvent Recovery System

    DWK Life Sciences (Kimble)

    For gravimetric oil and grease Three position linear system Heating mantle, controller and splash guard are required for complete system (clamps and support included): power 15 amps - 115 volts. Refrigerating circulator recommended for system water coolant: -4°C. Proper ventilation…

  • Prescored Recessed Well Flat Liner

    J.G. Finneran

    This liner is designed specifically for the Finneran 96-Well Multi-Tier Micro Plate.  This liner preserves sample integrity and prevents cross contamination.  Finneran sealing systems prvent evaporative losses and contamination from ambient air. The PTFE faced medicalgrade silice mat meets…

  • Liner F100 PTFE-TFM

    PerkinElmer

    Reaction vessel made of PTFE-TFM (tetrafluoroethylene, modified). Optionally used as liner in pressure vessels MF100 and HF100 for longer life with high temperature applications.

  • Scienceware® Labmat™ Bench Liner

    Bel-Art Products

    Disposable bench and drawer liner Facilitates clean-up and protects work surfaces from stains, spills and wear Cuts easily to desired size with scissors or the Scienceware Safety Cutter Non-skid plastic backing stops most solutions from soaking through, while the highly absorbent upper…

  • Inlet Liner Packing Tool

    Restek

    Position wool reproducibly every time Accurate to a specific, measured depth Can be used with all manufacturers' liners

  • Polymide Liner F/250µm Columns

    Agilent Technologies

  • TIDI Evacuation Cup Liner

    TIDI Products

  • Liner Sealing Rings

    Thermo Scientific

  • Liner Alumina, 100mm3

    PerkinElmer

    Use alumina cups if the sample is to be brought to temperatures higher than 1500C and when metal samples are being run. Operating Tip: Since some samples will adhere to the cups, we recommend that you keep spare cups on hand.

  • Zero Dilution Inner Liner

    PerkinElmer

    Installed in a capillary injector, this optional special hourglass insert connects the fused-silica transfer line from the headspace sampler to the capillary column, permitting undiluted and efficient sample transfer. The insert provides the advantages of a direct connection while maintaining the…

  • Cyclo Splitter Split Liner 4mm

    PerkinElmer

    Cyclo Splitter Split Liner 4mm; 4mm I.D x 6.2mm O.D x 92.1mm length.

  • Double Gooseneck Splitless Liner 4mm

    PerkinElmer

    Double Gooseneck Splitless Liner 4mm; 4mm I.D x 6.2mm O.D x 92.1mm length

  • Cup Splitter Split Liner 4mm

    PerkinElmer

    Cup Splitter Split Liner 4mm; 4mm I.D x 6.2mm O.D x 92.1mm length

  • BCR® Full-Finger Polyester Glove Liner

    Berkshire

    …hands from latex and chemical sensitivity. Wearing glove liners can enhance comfort and reduce perspiration and sensitivity associated with long term wearing of latex, vinyl, and nitrile gloves. BCR® Polyester Glove Liners are made out of high quality 100% continuous filament polyester.…

  • BCR® Half-Finger Nylon Glove Liner

    Berkshire

    BCR® Single Knit Nylon Glove Liners are made out of high quality 100% continuous filament pre-shrunk nylon.  They are lightweight, soft, and comfortable to wear.  100% knitted nylon  Protects against skin irritation caused by latex or PVC gloves  Constructed…

  • Fused Silica Adapter w/Rem Liner

    PerkinElmer

    Fused Silica Adapter w/Rem Liner

  • BCR® Half-Finger Polyester Glove Liner

    Berkshire

    BCR® Glove Liners are the ideal choice in any industry when the job calls for long hours of use when hand comfort is a concern. Special fiber construction allows for moisture absorption during extended wear. Berkshire's full line offers a choice to better provide even the most discriminating…

  • BCR® Full-Finger Nylon Glove Liner

    Berkshire

    BCR® Single Knit Nylon Glove Liners are made out of high quality 100% continuous filament pre-shrunk nylon. They are lightweight, soft, and comfortable to wear. 100% knitted nylon Protects against skin irritation caused by latex or PVC gloves Constructed using special seamless…

  • Vial File®, Clear, TFE Liner

    DWK Life Sciences (Wheaton)

    …The closed-top closures have Teflon faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black phenolic; the cap and the liners are autoclavable. With all the organic vials, Teflon and type 1 glass are…

  • Liner Focus Tapered 4mm Pk5

    Agilent Technologies

  • Liner Focus 4890-6890 4mm Pk5

    Agilent Technologies

  • Inert Liner Splitless Single Taper

    Agilent Technologies

  • 9mm R.A.M.™ Caps with PTFE Liner

    J.G. Finneran

    Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.