Lamotte

Compare Tool

Select up to 3 products

Lamotte
1 - 32 of 870
Sort
View
Show

LaMotte

Water Quality Analysis Testing Products - Since 1919

LaMotte Company manufactures its products at its 65,000 square foot facility in Chestertown, Maryland, near Washington DC on the east coast of the United States. Now, almost 10 years into its Lean Manufacturing journey, LaMotte’s chemists, engineers, and technicians continue to optimize a wide variety of processes to achieve maximum quality and efficiency. We offer a wide range of test methods and tools for the analyst.

From multi-factor test strips, foil-packaged unit dose tablets, unit dose powder vials, and liquid reagents to sonic-welded color comparators, multi-parameter test kits, and electronic water analysis instruments. LaMotte controls the manufacturing of all aspects to ensure the highest quality.


  • Insta-Test® strips are available to perform checks for water quality factors. Test strips are a quick way to monitor water without having to use reagents.

  • Most Widely used DPD Chlorine Tablets for Determining Free and Combined Chlorine DPD chlorine tablets employ DPD indicator (diethyl-p- phenylenediamine) to distinguish levels of free, combined, and total chlorine in a simple test sample. DPD chlorine tablets designated “Instrument…

  • Measures multiple parameters Stores up to 25 data sets Waterproof to IP67 The PockeTester pH/Conductivity tracer measures five parameters including conductivity, TDS, salinity, pH and temperature using one electrode. Units of measure are pH, µS, mS, ppm, ppt, mg/L, g/L,…

  • Applications: Drinking Water, Industrial Water Boiling and Cooling, Water and Wastewater This Alkalinity Test Kits uses a Direct Reading Titrator with standard acid to the phenolphthalein (P) and/or total (T) alkalinity endpoint. Range and sensitivity is 0–200 ppm as CaCO3 in 4 ppm…

  • Designed to provide immediate, accurate and economical soil analyses in the field Self contained Test 15 different soil factors including available forms of macronutrients and micronutrients Simplified test procedures provide at least 20 tests for each nutrient. Each accurately…

  • Tests performed on liquid soil extract Reagents and labware mounted in foam-lined, removable shelves in a carrying case of ABS plastic Simplified field tests for available nutrients in agricultural soils permit early detection of nutrient deficiencies. Equipment determines 14 soil…

  • …treatment tests Pre-prepared reagent systems save labor Simplified methods reduce technician error Specific kits available for LaMotte’s SMART 3 Colorimeter and SMART Spectro Many kits use EPA compliant methodology Each reagent system kit includes all necessary…

  • Kit contains 1.0 and 10 NTU standards required to calibrate the Lamotte 2020we instrument. The deluxe kit also contains sealed secondary standards of each value.

  • Molybdate Kit

    LaMotte

  • …and each test features automatic wavelength selection. The entire multi-LED optical system is embedded in the light chamber and optimized for LaMotte test reagent systems. The microprocessor selects the wavelength and allows the user to load up to 10 tests for analyzing custom reagent systems.…

  • Strips chemically treated with starch and cadmium iodide measure total chlorine to determine the strength of sanitizers in cleaning solutions. Furnished in plastic vial of 200 1/4” x 3 1/2” strips, with color comparison chart, which has three standards 50, 100 and 200 ppm

  • Single wavelength, direct reading colorimeters Water-resistant design Auto-zero calibration Direct read-out in parts per million Meets all USEPA requirements for NPDWR and NPDES monitoring programs Single parameter test kits provide readings with ±2% accuracy within…

  • Applications: Drinking Water, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater 2951HR High Range QAC test papers are specifically formulated to read high range levels of QAC. Range and sensitivity is 200, 400, 600, 1000, 1500 ppm.

  • DPD Tablet Octa-Slide (9859G42) Sufficient for 50 tests Employs DPD tablet method: EPA- accepted method for NPDWR Octa-Slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Cl Low Range Octet Comparator (9859H10) Employs DPD tablet…

  • This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

  • This Chlorine test kit measures for Chlorine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl. Applications: Drinking Water, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater # Tests (# Rgts): 50 at 10…

  • Water Sampling Outfit, LaMotte 3103 For collecting water samples to be tested for dissolved oxygen content Clear acrylic sampling chamber takes 60 mL sample collecting bottle Includes sampling chamber, 9866A35 Calibrated Line and nine USP Type 1 glass sample bottles with…

  • Rapid test procedures and laminated color charts give low/medium/high concentrations for nitrogen, phosphorus and potassium (15 tests each) A pH indicator and color chart cover the range pH 4.0-9.0 (30 tests). A garden guide manual and soil handbook interpret test results and give lime and…

  • Hardness Kit

    LaMotte

  • This kit tests for Phosphate using the Octa-Slide 2 Comparator. Range is 1.0 - 10.0 ppm (PO4) and 10 - 100 ppm (PO4). Applications: Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater  

  • Thermometer

    LaMotte

    Mounted in fenestrated plastic armor with perforated bulb guard and suspension ring Range of -5 to +45°C in 0.5° increments, black on yellow scale

  • …increments Self-zeroing; overflow is returned to reservoir 2002A01 (LaMotte 0847) and A06 (LaMotte 0996) burets include 50 mL plastic squeeze bottle reservoir with screw cap to hold buret. 2002A03 (LaMotte 0427) and A09 (LaMotte 0997) burets include 24 mm screw cap, but do not include reservoir.…

  • Kit contains 1.0 and 10 NTU standards required to calibrate the Lamotte 2020WI instrument. The deluxe kit also contains sealed secondary standards of each value.

  • Kit contains 1.0 and 10 NTU standards required to calibrate the Lamotte 2020e and TC-3000e instruments. The deluxe kit also contains sealed secondary standards of each value.

  • TEST Turbidity (on LaMotte 2020) 100 NTU +/-1 Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material

  • TEST Turbidity (on Lamotte 2020) 1.0 NTU Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.