Laboratory Stirrer

Compare Tool

Select up to 3 products

Laboratory Stirrer
1 - 32 of 64
Sort
View
Show
  • …digital lab stirrers allow the user to set the required torque and speed, and observe the true values of the torque and speed on an easy-to-read LCD display. An accurate microprocessor controls stirring speed and guarantees precision in the speeds achieved by the laboratory stirrer, while an…

  • …casting, with minimum requirements in terms of space on the laboratory bench. The user-friendly self-locking chuck is extremely easy to close, and can accommodate shafts with up to 10 mm diameter. A special system blocks the stirrer in case of incorrect functioning thus ensuring safe operation.…

  • RT2 Digital Hotplate

    Thermo Scientific

    …digital display hotplate. Equipped with hot top warning and built-in temperature shut-off to provide accurate heating of samples and safety to the laboratory. Features Digital control Overheat prevention circuit turns off the heater if the top plate temperature reaches 450°C …

  • Overhead stirrer, general purpose, SS10 Used with volumes up to 15 litres Aqueous to low viscosity liquids Keyless chuck Quiet running Budget price Easy to use general purpose overhead stirrer suitable for day to day laboratory use with aqueous and low viscosity liquids…

  • Totally enclosed, 1/40hp DC permanent magnet motor with dual 8 mm (5/16") armature and gear shafts with milled flats. Armature shaft with maximum speed of 4000rpm.; 18:1 ratio gear shaft rated 3.6in-lb torque, up to 333rpm. Motor supplied with 1.5 meter 3-wire cable for controller connection.…

  • Electric Laboratory Stirrers

    Arrow Engineering

    …1/2” propeller. Light Duty Stirrer (8583L20) Ideal for stirring light to medium viscosity fluids Delivers 16.8 in.-oz. or 1.05 in.-lbs. of constant torque throughout its speed range of 0 to 6,000 rpm. General Duty Stirrer (8583L24) Will handle a wide range…

  • Magnetic Induction Stirrer

    labForce (a Thomas Scientific Brand)

    …parts making this unit 100% wear-free and maintenance free. The magnetic induction stirrer is ideal for use in general research, life science, industrial, quality analysis, and clinical laboratory settings. Precision, literally at the touch of one button! With just one convenient…

  • Digital and Hotplate Magnetic Stirrer

    labForce (a Thomas Scientific Brand)

    Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Like our popular 7 x 7-inch series, these hotplates/stirrers feature a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant…

  • …Thomas No. 1205W08 Universal laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. The stirrer comes equipped with a RS 232 and a USB…

  • Digital and Magnetic Stirrers

    labForce (a Thomas Scientific Brand)

    labForce Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Like our popular 7 x 7-inch series, these 10 x 10-inch hotplates/stirrers feature a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant…

  • Digital and Magnetic Stirrers

    labForce (a Thomas Scientific Brand)

    labForce Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Like our popular 7 x 7-inch series, these 10 x 10-inch hotplates/stirrers feature a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant…

  • …59 minutes and 59 seconds Programmable Audio Signals The stirrer may be run sequentially through the memory banks, independently in any one of the memories, or continuously at a selected speed. Turning the stirrer off does not erase the programmed information. It permits automatic…

  • Powerful, mechanically controlled laboratory stirrer designed for highly viscous applications for quantities up to 80 l (H2O). It is suitable for intensive mixing for use in laboratories and pilot plants. The stirrer comes equipped with a protection for overheating of the motor by means of…

  • The bestseller in laboratories: Strong motor for a higher range of speeds, additional temperature control mode for faster heating of medium. Integrated temperature control Incl. PT 1000 temperature sensor (PT 1000.60) Exact temperature and speed setting via digital display, even when…

  • …casting, with minimum requirements in terms of space on the laboratory bench. The user-friendly self-locking chuck is extremely easy to close, and can accommodate shafts with up to 10 mm diameter. A special system blocks the stirrer in case of incorrect functioning thus ensuring safe operation.…

  • A magnetic stirrer or magnetic mixer is a laboratory device that employs a rotating magnetic field to cause a stir bar (also called "flea") immersed in a liquid to spin very quickly, thus stirring it. The rotating field may be created either by a rotating magnet or a set of stationary…

  • Polished Glass Stirrer Shafts

    Wilmad-LabGlass - SP Scienceware

    Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

  • Compact design laboratory flask mixer features integrated drive and stirring seal allowing direct installation of flask and stirring in a vacuum and sealed state. No time-consuming shaft alignment required.  Its strong stirring power is perfect for samples of high volume and high…

  • Digital magnetic stirrer with heating; the MSH-300i Intelli-stirrer is designed for laboratories with higher requirements. It offers digital setting and control of temperature and rotation speed. A powerful magnet allows mixing solutions with glycerine viscosity level. Maximum volume of stirred…

  • MMS-3000 Magnetic Stirrer

    Grant Instruments

    The Grant bio mini magnetic stirrer MMS-3000 is a compact magnetic stirrer for handling small volumes in routine laboratory procedures such as pH metering, extraction and dialysing. Adjustable speed control: 0 to 3000 rpm Stirring volume: 20 litres Quiet operation, small size - fits neatly…

  • Magnetic Induction Stirrer

    Heathrow Scientific

    …in the stirrer design to ensure a strong magnetic coupling with consistent accurate alignment which significantly reduces the chance of spin-outs. The magnetic induction stirrer is ideal for use in general research, life science, industrial, quality analysis, and clinical laboratory settings.…

  • Digital Laboratory Stirrer Features DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required Direct-drive system reduces noise and require low maintenance Achieves high torque enabling stirring of high viscosity…

  • …casting, with minimum requirements in terms of space on the laboratory bench. The user-friendly self-locking chuck is extremely easy to close, and can accommodate shafts with up to 10 mm diameter. A special system blocks the stirrer in case of incorrect functioning thus ensuring safe operation.…

  • …life in corrosive environments Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing agents and steam sterilization for biological applications…

  • …casting, with minimum requirements in terms of space on the laboratory bench. The user-friendly self-locking chuck is extremely easy to close, and can accommodate shafts with up to 10 mm diameter. A special system blocks the stirrer in case of incorrect functioning thus ensuring safe operation.…

  • …yourself: Compact design The reduced design and the focus on the most essential aspects make the new IKA MICROSTAR and MINISTAR stirrers reliable laboratory companions. Constant torque All models of the IKA MICROSTAR and MINISTAR series guarantee a constant torque over the entire rpm…

  • Biological Magnetic Stirrers

    Techne (Cole-Parmer)

    …pathogenic materials. Stirrer rod design eliminates rotating bearings within the culture vessels, avoiding the difficulties arising from attempts to clean and autoclave conventional vessels. Include detachable cord and plug for 120 V, 50/60 Hz; 2 W. Can be converted in the laboratory for use on 110…

  • Precision PTFE Stirrer Bearings

    Wilmad-LabGlass - SP Scienceware

    …not recommended for use with this bearing. Complete 10mm diameter assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring (LG-9470-300), threaded heavy wall borosilicate glass adapter, and top cap (LG-10818-114). See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.

  • STEM Integrity 10 Reaction Stations

    Electrothermal (Cole-Parmer)

    …may be assured with stirring rates of between 350rpm to 1200rpm using magnetic stirrers. With working volumes of between 2ml to 25ml, the STEM Integrity 10 is an excellent screening tool for most laboratories and can also be used to establish ideal process conditions. Solubility tests…

  • …chemical-resistant ceramic surface. It can be set to a range of temperatures, from room temperature to 380°C. It’s small footprint makes it ideal for use in a laboratory where free space can be a commodity. The LCD display is large and easy to read. Includes 2 small magnetic stir bars.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.