Kinematic Viscosity Standard

Compare Tool

Select up to 3 products

Kinematic Viscosity Standard
1 - 24 of 24
Sort
View
Show
  • High Viscosity Standards

    Cannon Instrument

    For determining viscosities in asphalt and polymers (see ASTM D 2170 and D 2171) Traceable NIST For Kinematic Viscosity Values (cSt), please contact Thomas Scientific

  • General Purpose Viscosity Standards

    Fungilab

    Viscosity standards are ideal for the calibration of dynamic and kinematic viscosity instrumentation. Standards are supplied at 500mL and must be used with a supplementary beaker. All viscosity standards are delivered with a certificate of analysis and are ISO 17025 / ISO Guide 34 certified.…

  • Ink and Paint Viscosity Standards

    Cannon Instrument

    …viscometers For use with Zahn, Shell and Ford viscometer cups. Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate kinematic viscosity and drain times for the various cups at 25°C are given in table. Actual values are furnished with each standard.

  • Certified Viscosity “Check Oils” for SAE Target Viscosities

    Cannon Instrument

    …released a line of viscosity check oils specifically designed for verification of SAE target viscosities per ASTM D 445, D 5293, and D 4684. The CVCO (Certified Viscosity Check Oil) series includes formulated commercial engine oils with certified values for kinematic viscosity in mm²/s (cSt) at 40…

  • Zeitfuchs Cross-Arm Unity Factor, Found Holder, ZCAXC-RO Series Viscometers

    Cannon Instrument

    Calibrated viscometers For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F and asphalt…

  • Semi-Micro, Cannon CUSMC Series Viscometer

    Cannon Instrument

    …measurement of kinematic viscosity of small samples of transparent Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Viscometer constant is same at all temperatures Initial sample can be diluted to as much as 20 mL for intrinsic viscosity determinations …

  • Zeitfuchs Cross-Arm Calibrated Viscometers

    Cannon Instrument

    Cannon ZCAC Series For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445 specifications; also conform to ASTM Standard D 446 Precision: ±0.3% Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F (60°C) and…

  • Bubble Viscometers

    BYK-Gardner

    kinematic viscosity data quickly and easily using the Alphabetical Comparison Method (upward speed of a trapped air bubble) Conforms to ASTM D 1131, D 1545 and D 1725 Standard tubes easily identified by large letters Quick and easy cleaning Viscosity of the liquid sealed in each standard is…

  • Cannon-Fenske Series Viscometers

    Cannon Instrument

    …Type; Measures kinematic viscosity of dark Newtonian liquids Meets ASTM D 445 and ISO 3104 requirements Measures liquids whose meniscus cannot be seen at the timing marks when using Routine-type viscometers Precision: ± 0.3% Also used to measure kinematic viscosity of liquid…

  • BS/U/M Miniature U-Tube

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Precision: ±0.2% Specifications conform to ASTM D 446 and ISO 3105. Minimum sample volume: 2 mL. Requires liquid bath depth of 230 mm (9"). Includes certificate of…

  • BS/IP/MSL Miniature Suspended Level Viscometers

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision:±0.2%. Minimum sample volume:4 mL. Requires liquid bath of 305 mm (12”). Includes certificate of…

  • BS/IP/RF U-Tube Reversed Flow Viscometers

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of opaque Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.3%. Minimum sample volume: 7 mL. Requires liquid bath depth of 280 mm (11"). Includes certificate…

  • BS/IP/SL Suspended Level Viscometer

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105 Precision: ±0.2% Minimum sample volume: 11 mL. Requires liquid bath depth of 250 mm (10”).…

  • BS/IP/SL(S) Viscometers

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume:10 mL. Requires liquid bath depth of 230 mm (9”). Includes certificate of…

  • BS/U Tube Viscometers

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume: 7 mL in sizes A to C; 12 mL in sizes D to F ; 23 mL in sizes G and H. Requires…

  • TE-3000 Constant (Low) Temperature Bath

    Cannon Instrument

    …monitoring of bath temperature through built-in platinum resistance thermometer Meets ASTM D 445 requirements for measurements of kinematic viscosity at low temperatures Bath and calibration temperatures can be entered digitally on keypad. Non-volatile memory protects temperature…

  • Flow Cup Viscometers

    Fungilab

    …accurate kinematic viscosity data. They are ideal for the paints, inks, and varnishes industries. The measured kinematic viscosity is generally expressed in seconds (s) flow time when the fluid is flowing through an orifice at a specified temperature. By utilizing conversion equations, the viscosity

  • Cannon-Manning Semi-Micro, Cannon CMSMC Series Viscometers

    Cannon Instrument

    …Viscometers For measurement of kinematic viscosity of small samples of transparent Newtonian liquids, particularly petroleum products or lubricants Meets ASTM D 445 requirements Precision: ±0.2% Specifications conform with ASTM Standard D 446. Minimum sample volume: 1.0…

  • CT-1000 Constant Temperature Baths

    Cannon Instrument

    …within the range of 20°C to 100°C and 0.03°C above 100°C, providing the temperature sensitivity required by ASTM D 445 for kinematic viscosity measurements. Two electric heating elements inside the bath rapidly heat the medium to any desired temperature within the range. A cooling…

  • Cannon-Ubbelohde UBU And UBC Series

    Cannon Instrument

    Uncalibrated and Calibrated Viscometers Measure kinematic viscosity of transparent Newtonian liquids by suspended level principle Meets ASTM D 445 and D 446 and ISO 3104 and 3105 requirements. Precision: ±0.2% Similar to Cannon-Ubbelohde but less rugged in design.…

  • CT-500 And CT-518 Constant Temperature Baths

    Cannon Instrument

    …accurate temperature control of 0.01°C within the range of 20° to 100°C, providing the temperature sensitivity required by ASTM D 445 for kinematic viscosity measurements. A cooling coil, when connected to tap water or a cooling system, permits operation below or slightly above ambient temperature.…

  • BS/U-Tube Capillary Viscometers

    Fungilab

    …measuring the kinematic viscosity of transparent Newtonian fluids within a range of 0.9-10,000 cSt. Includes a calibration certificate with a Constant values at 40°C and 100°C and a precision of ±0.2%. Viscometers conform to ASTM D445, D446, ISO 3104, ISO 3105 and UNE 400313 standards. Additional…

  • Cannon-Ubbelohde, CUU And CUC Series Viscometers

    Cannon Instrument

    Uncalibrated and Calibrated Viscometers Suspended level viscometer for measurement of kinematic viscosity of transparent Newtonian liquids Also used for evaluating jet fuels and hydraulic fluids Meets ASTM D 445 and D 446, as well as ISO 3104 and 3105 requirements Suitable for use at…

  • Ubbelohde Capillary Viscometers

    Fungilab

    …traceability to recognized international standards UKAS. UBBELOHDE ASTM (ASTM D445-446, ASTM D2515, ISO 3104-3105 and UNE 400313) UBBELOHDE DIN (DIN 51562 Part 1, ISO 3105 and UNE 400313) Ubbelohde Viscometers are used to determine kinematic viscosity of transparent Newtonian liquids.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.