Kinematic Viscometer

…Small sample volume: <0.5 mL Rapid automated analysis: <3 minutes The Cannon SimpleVIS™ Portable Viscometer offers the industry a new tool for quick and reliable kinematic viscosity measurement. The SimpleVIS™ provides exceptional temperature control which is paramount to…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105 Precision: ±0.2% Minimum sample volume: 11 mL. Requires liquid bath depth of 250 mm (10”).…

…457 mm (18") Cylindrical glass vessel is deeper than glass vessel of CT-500, allowing the use of longer viscometers such as the Cannon- Ubbelohde Four-Bulb Shear Dilution Viscometer (ten-fold dilution type). Otherwise identical to Model CT-500. Power requirements: 9726A17 is 115 to 120 V,…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume: 7 mL in sizes A to C; 12 mL in sizes D to F ; 23 mL in sizes G and H. Requires…

Fungilab's Viscoball is an accurate kinematic viscometer suitable for the testing of transparent Newtonian liquids and gases. The Viscoball provides measurements for low viscosity substances in the food, chemical, cosmetic, pharmaceutical, and petrochemical industries. The improved visibility of…

Calibrated For measurement of kinematic viscosity of small samples of transparent Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Viscometer constant is same at all temperatures Initial sample can be diluted to as much as 20 mL for intrinsic viscosity…

For ink and paint viscometers For use with Zahn, Shell and Ford viscometer cups. Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate kinematic viscosity and drain times for the various cups at 25°C are given in table. Actual values are furnished…

…UKAS. UBBELOHDE ASTM (ASTM D445-446, ASTM D2515, ISO 3104-3105 and UNE 400313) UBBELOHDE DIN (DIN 51562 Part 1, ISO 3105 and UNE 400313) Ubbelohde Viscometers are used to determine kinematic viscosity of transparent Newtonian liquids. Sample volume: aprox. 15 ml. Precision: ±0.2%.

…mm (2") in diameter for insertion of viscometers. Each unit maintains accurate temperature control of 0.01°C within the range of 20°C to 100°C and 0.03°C above 100°C, providing the temperature sensitivity required by ASTM D 445 for kinematic viscosity measurements. Two electric…

…SS (N/m 2 ) Density (introduced by the user): g/cm 3 Viscosity reading Dynamic viscosity : cP or mPa·s Kinematics viscosity: cSt Units Converter: from SI to CGS Program features Time to torque: Ending of the test upon reaching a programmed…

Calibrated viscometers For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F and asphalt…

For glass capillary viscometers and other instruments requiring precise low temperature control All-digital, LCD displayed, microprocessor-controlled temperature regulation; Cooled thermoelectrically (solid state heat pump) Temperature range: -30°C to +30°C °C/°F…

…(Qts) and 3.8 L (1 Gallon) sizes. The oils enable users to “check” the performance of their Cold-Cranking Simulator, Mini-Rotary Viscometer, and Kinematic Viscometers by measuring commercially-available formulated engine oils. Viscosity values for the check oils will be at typical blend targets.…

Yields accurate kinematic viscosity data quickly and easily using the Alphabetical Comparison Method (upward speed of a trapped air bubble) Conforms to ASTM D 1131, D 1545 and D 1725 Standard tubes easily identified by large letters Quick and easy cleaning Viscosity of the liquid sealed in…

…constants and ranges. Individually boxed. Calibrated viscometers are supplied with a certificate of calibration and instruction sheet. Viscometers have the serial number and size printed on the outside of the box and on the viscometer. Holder is not supplied. For holders, see Thomas number…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume:10 mL. Requires liquid bath depth of 230 mm (9”). Includes certificate of…

Uncalibrated and Calibrated Viscometers Suspended level viscometer for measurement of kinematic viscosity of transparent Newtonian liquids Also used for evaluating jet fuels and hydraulic fluids Meets ASTM D 445 and D 446, as well as ISO 3104 and 3105 requirements Suitable for use at…

…all traces of oil Air pressure drives solvent No electrical contact needed Unit is designed to wash the inside of glass kinematic viscometer tubes with a jet of solvent. At the touch of a button, the solvent stream is cut off and an air jet is directed into the tubes for drying.…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision:±0.2%. Minimum sample volume:4 mL. Requires liquid bath of 305 mm (12”). Includes certificate of…

…the box and on the viscometer. Without holders. See Thomas numbers 9726M95 and M98 for holders. For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445; specifications also conform to ASTM D 446 Also used to measure kinematic viscosity of cut-…

…viscometers—made of anodized aluminium body with a stainless steel orifice—provide accurate kinematic viscosity data. They are ideal for the paints, inks, and varnishes industries. The measured kinematic viscosity is generally expressed in seconds (s) flow time when the fluid is flowing through an…

Ideal for kinematic viscosity determinations between 10°C and 30°C Built-in thermoelectric cooling provides “rock-solid” temperature control at ambient and below Meets ASTM D 445 precision specifications from 10°C to 100°C The Cannon CT-600 has many of the engineering and control features of…

…Blending Method Kinematic viscosity calculations- allows the estimation of kinematic viscosity (cSt), viscosity (cP) and density of an oil at any temperature Determination of Viscosity Index- calculates the Viscosity Index after entering the kinematic viscosity at any two temperatures…