Kimax Glass Tube

With lip and marking spot Made from KG-33 glass tubing Listings indicate length x o.d. in mm.

Heavy wall Screw cap, with round bottom and a slightly constricted neck, finished with screw thread for number 24-410 deep form cap Used for separating neutralized sediment from sputum in the preparation of cultures Available in 35 mL and 50 mL sizes, both of which are 29 mm o.d.…

With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

Dimensions shown are length x o.d. in mm.

…overflow tube Graduated in 1/10 ml divisions from 0 to 1 mL; in 1/5 mL divisions from 1 to 10 mL With 24/40 joints; meets ASTM Standard E 123 Specialized for determination of water in emulsified asphalts With Standard Taper24/40 joints and reflux overflow return tube …

Heavy glass with side tubulation for tubing Sizes 25 mL through 4000 mL Designed from Federal Specifications NNN-F-240 Scale indicates approximate volumes Flasks are fabricated from molded heavy wall for strength and have a beaded bottom surface that prevents scratching and slippage…

…Supplied with color-coded PTFE stoppers (4997L15 to L65) Flasks have marking spots on all sizes 10 mL and larger. The 2 mL size is test tube shaped; all other sizes are conventional flask shape. The 5 mL and larger sizes are designed from requirements for Type 1, Class A “unserialized”…

Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

…a hose connection to accept 5/16” ID flexible tubing When properly greased, it should hold a vacuum of 29 inches of mercury for twenty-four hours All glass apparatus manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class…

Made from KIMAX KG-33 glass tubing Round bottom and slightly constricted neck with Standard Taper solid ground glass stoppers Tubes have a sand-blasted spot for marking 100 x 13 mm size test tubes include No. 9 Standard Taper stopper; 150 x 16 and 150 x 19, No. 13; 175 x 22 and 200 x…

Class B accuracy With filling tube and overflow tube Kimax®, with 3-way PTFE stopcock overflow cups and refill tube. Filling is through stopcock. Overflow tube at the top of the buret that accepts 1/4” i.d. flexible tubing. Buret is self-zeroing style. Stopcock for all sizes is…

Inlet tube bent straight back Graduation interval 0.1 mL Overflow cup with drain tube Scale is durable black ceramic enamel PTFE stopcock plug with 2 mm bore, inlet tubing for refilling. Auto zero reservoir top.

…white ceramic enameled scale Side filling tube has separate Teflon stopcock to control liquid; tube is 5/16 inch o.d. Calibrated to the accuracy requirements found in ASTM specification E 694 Kimax precision bore buret has a side filling tube with a separate stopcock to control liquid within…

…number Supplied with a Certificate of Graduation Accuracy Buret is self-zeroing style Designed from ASTM E 287, Class A requirements Filling tube and overflow tube at the top of the buret accept 1/4” i.d. flexible tubing. Filling is through stopcock. Scales are durable black enamel.

…Graduation Accuracy Scale is durable white ceramic enamel Stopcock for both sizes is Ps 2. Filling is through stopcock; filling tube accepts 1/4” i.d. flexible tubing. 1990U10 has 0.01 mL subdivisions and a tolerance of ±0.01 mL. Approximately 761 mm long. 1990U30 has 0.02 mL subdivisions…

Detachable autoclavable plastic sidearm designed to accept 5/16" ID flexible tubing (US Patent 3,268,300) Sidearm has two ears to provide a finger grip for easy insertion into a neoprene grommet by turning the plastic piece Opening in the sidearm is larger at the flask end to hold a…

…not be handled. Packed complete with a reservoir bottle, U-shaped drying tube, vented connecting tube, rubber squeeze bulb, #1 single-holed rubber stopper, PTFE stopcock plug and 1/4 inch ID tubing Precision ground tips assure uniform outflow Supplied with a chemically-resistant,…

Tubes are suitable for tissue culture work and general bacteriological use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular…

KIMAX tube with a bulb and a glass foot. Larger in size than 46150. Vertical tube has a closed rounded top.

Can be used in the determination of residues in liquified petroleum (LP) gases, ASTM Method D 2158 Calibrated "to contain" Capacity 100 mL Graduations: 0 to 1 in 0.05 mL Dimensions: 37 mm o.d. x 203 mm L.

This graduated 50 ml KIMAX tube has a short tapered bottom. Graduated and calibrated to contain. The top end has a pour spout. Scale, legend and marking spot are durable white ceramic enamel. 50ml total capacity; graduated from 0-10 ml in increments of 0.5 ml and from 10-50 ml in increments…

KIMAX® culture tube intended primarily for use in the testing of milk for the presence of bacteria by the methylene blue reductase test. Smooth, fire-polished rim Graduation line is located at the 10 mL level Durable white ceramic enamel marking spot Described in APHA Standard…

…culture tubes feature a permanent ceramic label, fused to the glass, which is easily written on with marker or pencil. Convenient package quantities Permanent pink labels placed to allow an unobstructed view of cell suspension Manufactured from 51 expansion borosilicate glass…

KIMAX tube used for the determination of small quantities of solids in large volumes of liquids. Calibrated to contain. Stem is graduated in 0.01 mL to 0.2 mL and the body has graduations at 25, 50, and 100 mL. Recommended for the determination of free water and sediment in diesel and other…

…tubes are ideal for sealing directly to vacuum manifolds, joints or valves. Attached polyethylene caps Sandblasted marking spot OD 4.97 (+0.0000/-0.013) mm ID 4.20 (+0.013/-0.0000) mm Wall thickness 0.375 mm Manufactured from 33 expansion, low extractable borosilicate glass…

…tubes are ideal for sealing directly to vacuum manifolds, joints or valves. Attached polyethylene caps Sandblasted marking spot OD 4.97 (+0.0000/-0.013) mm ID 4.20 (+0.013/-0.0000) mm Wall thickness 0.375 mm Manufactured from 33 expansion, low extractable borosilicate glass…

Borosilicate glass KIMAX-51 glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. Designed from ASTM Specification E982, Type IV requirements. Reusable tubes KG-33 Glass Plain end Fire polished rim Without marking…

KIMAX-51 tube made from N-51A borosilicate glass tubing with a sturdy lip and uniform wall thickness for maximum heat transfer and chemical resistance. Tube is without a marking spot.

KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

Tubes are suitable for tissue culture work and general bacteriological use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular…

…up to 13,100 RCF (with appropriate rubber sleeve adapter in a 50 mL rotor cavity) 15 mL and 30 mL reusable tubes achieve greater mechanical strength than standard glass centrifuge tubes. Manufactured from Type 1, Class B, borosilicate glass, they are fully autoclavable up to 300°C.

Oil Centrifuge Tube (2623Q31) Kimax® tube used in the determination of bottom sediment and water in petroleum products In accordance with ASTM D 1966, D 96 Stem diameter holds 1.5 mL; capacity 100 mL Calibrated to contain Graduations: from 1.5 to 5 in 1/2 …