Kimax Cap

Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

This Mojonnier flask with a threaded opening is a modified design of our standard Mojonnier flask with stopper joint. This version has a 24-410 GPI thread and is supplied with a black phenolic cap with PTFE-faced white rubber liner (45066C-24410).

Heavy wall Screw cap, with round bottom and a slightly constricted neck, finished with screw thread for number 24-410 deep form cap Used for separating neutralized sediment from sputum in the preparation of cultures Available in 35 mL and 50 mL sizes, both of which are 29 mm o.d.…

Suitable for autoclaving Plastic screw cap with cemented-in rubber liner is suitable for autoclaving up to 121°C 1756K30 is useful for water sampling and for tissue culture 1756K60 bottle has mark at 99 mL level KIMAX-35 bottles are designed from the requirements for milk dilution bottles…

With PTFE stopcock Includes plastic KIM-KAP® dust cap Scale is durable black ceramic enamel. Plain top. ASTM E287, Class B.

With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

Calibrated "to contain"; tolerances are within Class B specifications With marking spot and polyethylene snap cap

KIMAX® flask calibrated to contain Class A accuracy but without a serial number Supplied with a polyethylene snap cap Replacement cap is 28150R Designed from ASTM Specification E288 requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP…

…meets USP Type I or ASTM E 438, Type I Class A standards. The conical-bottom interior enables small sample volumes to drain down to bottom of cone for maximum retrieval. 12 x 32 mm size (Thomas number 9711R10) is designed for use with Varian and other autosamplers. Includes phenolic screw cap.

…of Graduation Accuracy Suitable for ISO 9000 quality programs Calibrated "to contain" and supplied with a polyethylene snap cap and a marking spot. Graduation ring is blasted on the neck. 500 mL size is suitable for determination of specific gravity of fine aggregate (ASTM…

…in ASTM Standards E 287 Supplied with Certificate of Graduation Accuracy With Ps2 bore PTFE stopcock plug (8682B22) Designed from ASTM Specification 287, Class A; 10 mL size meets ASTM Standard D 664 Includes plastic KIM-KAP ® dust caps. Straight top. Scale is white ceramic enamel.

Manufactured from clear KG-33 borosilicate glass Closed top black phenolic closures, unattached Closure supplied with rubber liners

Snap Caps are designed for KIMAX volumetric flasks Yellow polyethylene Caps may not be usable with items lacking necks specially tooled to proper diameters and contours Fits 1000mL volumetric flasks

Snap Caps are designed for KIMAX volumetric flasks Yellow polyethylene Caps may not be usable with items lacking necks specially tooled to proper diameters and contours Fits 100mL volumetric flasks

For use with Kimax brand 03-422 Series weighing bottles. Cap-style stopper only Standard taper joint: 29/12 Size: 33 x 24mm

…use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular trays. Supplied without caps. 73800, 73802 and 73805 for caps.

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…

…autoclavable Polypropylene caps included Extra-wide opening for ease of filling, dispensing, pipetting Kimax® bottles have enhanced graduations and marking spot of permanent white enamel that will not fade or rub off. Blue polypropylene screw cap is autoclavable, universally…

Deep form, of black phenolic resin with cemented rubber liner. As supplied with 4893D11 series Flasks and 9210E23 series Test Tubes. Can be autoclaved for 20 minute periods at 121°C. Rubber liners have been found to be satisfactory for tissue culutre. Cap size shown is GPI thread finish.

…KIMAX® tube with a screw thread finish Graduated and calibrated to contain Cap supplied has cemented-in white rubber liner and is packaged separately Scale, legend and marking spot are durable white ceramic enamel Replacement cap for 0493K43 & 0492Y27 is 45066B Replacement cap…

KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

…of Graduation Accuracy Suitable for ISO 9000 quality programs Calibrated "to contain" and supplied with a polyethylene snap cap and a marking spot. Graduation ring is blasted on the neck. 500 mL size is suitable for determination of specific gravity of fine aggregate (ASTM…

KIMAX flask with a screw-thread finish. Used to mix and store culture media, and in other culturing techniques. Included are long caps with cemented-in white rubber liners, not attached. Designed from ASTM Specification E1404, Type III.

…use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular trays. Supplied without caps. 73800, 73802 and 73805 for caps.

KIMAX buret with a PTFE plug. RAY-SORB processed to protect liquids sensitive to light of shorter wave lengths. KIM-KAP dust cap is included White ceramic enamel scale. Subdivisions: 0.1mL Capacity: 50mL Replacement stopcock is 41500F-2 (8682B22).

KIMAX tube designed for field use in testing petroleum. Calibrated to contain. Scale and legend are durable white ceramic enamel. Top is tooled to accept a Snap Cap (28150R-6) Graduated in %. 100 mL equals 200%

…of Graduation Accuracy Designed from ASTM Specification E 287, Class A requirements For replacement stopcock, see Thomas number 8682S16 Filling tube accepts 1/4” i.d. flexible tubing. Filling is through stopcock. KIM-KAP ® dust cap is included. Scale is durable white enamel. Plain top.

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…

KIMAX bottles are graduated with an approximate capacity scale. Bottom outlet is controlled with an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring…

…PTFE compression fit stopcock assembly and a precision ground tip 1983J70, 25mL buret has a permanent brown stained scale KIM-KAP™ dust cap is included Funnel fill style buret Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438,…

Low Form, KIMAX® Brand (Kimble 15165) Of borosilicate glass, with Standard Taper glass stopper. Bottom part of stopper is sealed. Designed from Federal Specification NNN-B-1493. Dimensions indicated in table are i.d. x height without cap.

…work and also used as a container for hygroscopic materials where the bottle containing the sample is dropped into the reaction flask. KIMAX® bottle with a cap-style closure that fits over externally ground body The 40 x 80 size accommodates 1 x 3" micro TLC plates and…