Ise Electrode

Compare Tool

Select up to 3 products

Ise Electrode
1 - 32 of 115
Sort
View
Show

Hach

  • ISE-02 Chloride Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-02 Chloride Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance Chloride analysis performance for many water applications. Specifications: Range: 1.8-35,500 ppm Sample pH Range: 2-12 Slope: 56…

  • ISE-01 Fluoride Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-01 Fluoride Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance Fluoride analysis performance for many water applications. Specifications: Sensor Type: Solid State (LaF Crystal) Range: 0.02 to…

  • Orion Ion Selective Electrodes (ISE)

    Thermo Scientific Orion

    Measurements using an ion selective electrode (ISE) are applicable in virtually every laboratory. ISEs can be used to measure ion concentrations in water, food, pharmaceuticals and biological samples. Ion selective electrodes can be used as endpoint indicators or to perform direct measurement and…

  • M1000 Benchtop pH/mV/Conductivity/ISE/DO Meters

    labForce (a Thomas Scientific Brand)

    …accurate to measure. The polarogram type DO electrode has a special electrode calibration cap. It only needs 3 to 5 minutes for electrode polarization. The electrode uses combination diaphragm cap which very convenient to use, and each DO electrode is equipped with three spare diaphragms caps. …

  • pH Electrode

    Agilent Technologies

    pH electrode

  • ISE-08 Sodium Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-08 Sodium Ion-Selective Electrode (ISE) is an affordable laboratory or field electrode offering good performance and longevity for Sodium analysis in many water applications like food & beverage analysis. Specifications: Sensor Type: Solid State (glass membrane) …

  • ISE-06 Calcium Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-06 Calcium Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance Calcium analysis performance for many water applications such as beverages, milk, aquariums, and water hardness evaluations. Specifications: …

  • ISE-07 Ammonia Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-07 Ammonia (NH3) Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering convenient replaceable membrane modules and excellent performance. Specifications: Sensor Type: Gas-Sensing - glass pH with gas-permeable membrane …

  • ISE-03 Silver Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-03 Silver Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance Silver analysis performance for many water applications. Specifications: Sensor Type: Solid State Range: 0.01-107,900 ppm Sample pH…

  • ISE-04 Nitrate Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-04 Nitrate Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance nitrate analysis performance for many water applications such as drinking water, agriculture applications and food/beverage. Specifications: …

  • ISE-05 Potassium Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-05 Potassium Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance Potassium analysis performance for many water applications such as wastewater, agriculture applications and food/beverage. Specifications: …

  • …Fluoride ion selective electrode (ISE) with a with a non-refillable gel reference with a single junction porous PTFE annular ring, and built-in temperature sensor. The electrode measures fluoride concentration in water samples. The laboratory version of this ISE is shockproff with its Epoxy…

  • …ion-selective electrodes (ISEs) to suit a wide variety of applications. Each electrode has a typical response time of 20 to 30 seconds but will vary with solution concentration. Oakton offers four electrode types: membrane, solid-state, gas sensing, and glass bulb. Gas sensing electrodes also…

  • Chloride Ion Electrode & Accessories

    Thermo Scientific Orion

    4210N68 Requires Thomas number 4215F60 reference electrode. Includes 760 mm lead. Uses Orion 900002 fill solution, order as 4215F70. Accessories Chloride Standard, 0.1000 ±0.0005M Chloride Standard, 100.0 ±0.5 ppm Ionic Adjustment Solution, Sodium Nitrate…

  • …collects and date/time stamps up to 2000 measurement sets with optional electrode ID, sample ID and user ID Calibration log stores ten most recent calibrations per parameter with viewable graph for multipoint pH and ISE calibrations Ensure measurement integrity by viewing the active…

  • REF-01 Double Junction Reference Electrode

    labForce (a Thomas Scientific Brand)

    The labForce REF-01 Double Junction Reference Electrode Reference Solution: options of the first salt bridge solution and the second salt bridge solution Reference Electrode: Ag/AgCl Junction: Ceramic Dimension: Φ12x155mm Compatible labForce meters: ISE500 and M1000. May…

  • Fluoride Ion Electrode

    Thermo Scientific Orion

    …and seawater brines and it is approved by EPA, Standard Methods and AOAC for feeds Range saturated to 0.02 ppm Requires 4215F10 reference electrode. Uses 4215F20 fill solution Accessories: Fluoride standard, 0.1000 M ±0.0005 Fluoride standard, 100 ppm ±0.5 ppm 1 or 2 ppm Fluoride standard…

  • …ID electrodes guarantee accurate calibration and measurements High resolution pH/mV-electrode and temperature inputs for pH, ISE, redox (ORP) or photometric titrations. Perfect for non-aqueous titration such as acid and base numbers in oils (TAN and TBN) Polarizable electrode input…

  • electrodes and meters. You can select from two types: Half cells Series 500 The half cells of the 500 series for which you will need a reference electrode type R 503 (an exception for this is the gas-sensitive NH 500/2 with integrated reference electrode). Combined ISE electrodes

  • Fluoride Electrode and Reagent Kits

    Thermo Scientific Orion

    …fluorosis. Thermo Scientific Orion offers Orion Fluoride ISE and Reagent Kits which enable you to easily comply with both standards. Fluoride Electrode and Reagent Kit Components (C838K34) 9609BNWP Combination Fluoride Electrode with Sure-Flow Reference 940907 100 ppm Fluoride…

  • Reference Electrodes For ISEs

    Thermo Scientific Orion

    …accidentally. Can be disassembled for cleaning. Electrodes potential characteristics match those of a saturated KCl calomel electrode. If filled with saturated KCl in place of 4215F20 refill solution, characteristics match those of reference electrode with Ag-AgCl internal element and resulting…

  • Replacement membrane modules for IntelliCAL ISENH3181 Ammonia ISE only. Modular, easy to maintain design Pack of three membranes extends the time between replacement orders

  • …Ammonia ISE Analysis Package contains all you need to start measuring ammonia (NH3) with your HQD meter instrument: The Intellical™ ISENH3181 Ammonia ISE with 1 m cable, 3-pack of replacement Intellical ammonia membrane modules, one 50 mL bottle electrode filling solution,…

  • Synonyms: Sodium fluoride solution Formula: NaF Formula Weight: 41.99 CAS No.: 7681-49-4 Density: 1.005 g/mL at 25 °C(lit.) General description: Visit our Sensor Applications portal to learn more. Preparation Note: prepared with NaF and H 2 O

  • CAS No.: 12125-02-9 Synonyms: Ammonium chloride solution Formula: H4ClN Formula Weight: 53.49 Linear Formula: NH4Cl MDL No.: MFCD00143604 Density: 1.00 g/mL at 20 °C; 0.995 g/mL at 25 °C(lit.)

  • CAS No.: 12125-02-9 Synonyms: Ammonium chloride solution Formula: H4ClN Formula Weight: 53.49 Linear Formula: NH4Cl MDL No.: MFCD00143604 Density: 0.995 g/mL at 25 °C(lit.)

  • Nitrate Ion Electrode

    Thermo Scientific Orion

    …filling solution. Nitrate Standard: 0.1000 ±0.0005 Nitrate Interference Suppressor Solution Filling Solutions:  For 4210S10 Combination Electrode use 4210S03  For 4210S11 and S12 Half Cell Electrodes use 4210S40  For 4215F60 Half Cell Reference Electrode use 4215F70

  • …sensors are included with the electrode. Thomas also offers a half-cell version that requires a double junction reference electrode. A separate reference electrode can be used with more than one type half-cell ISE, saving some cost. Double junction reference electrodes allow the use of special…

  • Ammonia Ion Electrode Accessories

    Thermo Scientific Orion

    …for probes with O-Ring membrane holder; membrane caps for probes with threads to mount membrane. Nitrate Test Kit Permits use of Ammonia Electrodes to measure nitrate Kit solutions are used to make sample basic and then to convert nitrate to ammonia for measurement. Ions such as chloride,…

  • High Performance Ammonia Electrode

    Thermo Scientific Orion

    …membrane on the electrode. The ammonia electrode has a waterproof BNC connector that can be used with any meter that has a BNC input and ensures a waterproof and secure connection when used with the Orion Star Series meters. Easy electrode maintenance with a translucent electrode body with fill…

  • pH Electrode Stand

    Thermo Scientific Orion

    Electrode holders and stands Electrode holders and stands permit one-handed operation of electrode movement Four-position holders allow simultaneous use of pH or ISE electrode and reference half cell Swing arm stand (0732H82) allows flexible movement of electrodes. Holder…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.