Iron Test Kit

Compare Tool

Select up to 3 products

Iron Test Kit
1 - 32 of 67
Sort
View
Show
  • Octa-Slide Comparator Tests total iron after any ferric iron is reduced to ferrous in the sample Sufficient for 90 tests Ferrous and ferric iron may be tested separately by eliminating the reduction step. Octa-Slide has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0…

  • Iron CHEMets Kit

    CHEMetrics

    …total iron, thioglycolic acid solution is added to reduce ferric iron to the ferrous state. The reagent formulation minimizes interferences from various metals. Results are expressed as ppm (mg/L) Fe. Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill,…

  • …Solution, dilutor snapper cup, small micro test tube, 5 mL micro test tube, and instructions. Range: 0-30 & 30-300 ppm MDL: 5 ppm Method: Phenanthroline (total & soluble) Note: Kit contains only enough Activator Solution to perform approximately 7 total iron tests.

  • Iron Test Kits

    LaMotte

    …3.0, 4.0, 6.0, 8.0 and 10 ppm iron Bipyridyl indicator Sufficient for 100 tests Octet Comparator For determining trace amounts of total iron in treated waters Octet Comparator has color standards representing 0.05, 0.10, 0.20, 0.30, 0.40, 0.60, 0.80 and 1.0 ppm iron Sufficient for 50 tests

  • …Solution, dilutor snapper cup, small micro test tube, 5 mL micro test tube, and instructions. Range: 0-60 & 60-600 ppm MDL: 10 ppm Method: Phenanthroline (total & soluble) Note: Kit contains only enough Activator Solution to perform approximately 7 total iron tests.

  • …of returning laundry that is stained and dingy, the IR-20 kit lets you do quick, on-the-spot tests for iron and manganese to see where the problem lies. Simple, fast, color disc method Kit includes three reagents, bottles, test tube brush, color discs, comparator box, viewing adapter,…

  • …colorimetric comparison of iron and pH, as well as a drop-count titrator for hardness determination. Test kit produces a wide range of pH tests. Combines frequently measured parameters in one rugged kit Uses color disc and drop count titration methods Kit contains all required reagents…

  • …total iron, thioglycolic acid solution is added to reduce ferric iron to the ferrous state. The reagent formulation minimizes interferences from various metals. Results are expressed as ppm (mg/L) Fe. Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty…

  • Storage: −20°C

  • …Ferrous iron then reacts with PDTS (3-(2-pyridyl)-5,6- bis(4-phenylsulfonic acid)-1,2,4-triazine disodium salt) in acid solution to form a purple-colored chelate. Results are expressed as ppm (mg/L) Fe. Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty…

  • Low Cost, Easy to use kits for testing a wide range of water quality Parameters Continuous gradient color disks provide accurate measurements—no need to “extrapolate” between discrete color blocks Rotate the color wheel to obtain a color match with the reacted sample and read your result in…

  • …thiocyanate complex, in direct proportion to the iron concentration. Results, expressed in mg/L, can be converted to mg/kg by dividing by the density of the brine. Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High Range…

  • Iron Stain Kit

    MilliporeSigma

    Synonym: Prussian Blue Test Kit Principle Deposits of loosely bound iron in erythrocytes, bone marrow, or tissue stain an intense blue when treated with acid ferrocyanide according to the well-known Prussian blue reaction.

  • …Chlorine/pH/Hardness and Iron test kit combines the best of both worlds. The kit includes 25 quick, easy and accurate tests using a simple dip-and-read formulation. The strips are packaged in a unique hinged, waterproof PopTop bottle with a desiccant liner that protects the test strips from…

  • …method, this kit measures Iron (medium range: 0.1 - 4 mg/L) and contains reagent for 100 tests. Includes one reagent, two color discs, comparator box, two viewing tubes, instructions and carrying case Simple, low-cost color disc method is the most accurate visual test kit method …

  • Residual test kits are used to test for the presence of iron or chlorine and the pH level on linen or towels in the laundry industry. Each kit is packaged in a durable plastic case and includes all items to complete approximately 60-75 tests.

  • …All tests give qualitative results for the specific nutrients. By comparing test results from healthy and problem plants, it is possible to pinpoint deficiencies or excessive nutrient conditions. Includes tests for ferrous and ferric iron, zinc, copper, manganese, and boron. Each test is made…

  • Laundry Residual Combination Kit Components: Test for Final Fabric pH - Sour Tester (C859L57) Chlorine OTO Residual Test Kit (C859L55) Iron Residual Test Kit (C859L56)

  • UN Number: UN3316

  • …a solution. Chelants may be used with sequestering agents to prevent calcium and magnesium scaling and iron and copper deposition. Each kit is packaged in a durable plastic case and includes all items to complete approximately 60-75 tests. Kit includes filtering equipment for testing turbid samples.

  • In addition to all of the test offered in Model BT-DT (2350600) this test kit provides testing capability for iron, silica, chlorine, nitrite, and total dissolved solids (TDS). The versatility and accuracy of this test kit will prove invaluable to boiler operators and chemical sales professionals. …

  • kit measures Iron (medium range - 0-7 mg/L) and contains reagent for 100 tests. Simple, low-cost color disc method is the most accurate visual test kit method Includes one reagent, two color discs, comparator box, two viewing tubes, instructions and carrying case Parameter: Iron,

  • Precautionary Statement(s): P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P352: IF ON SKIN: Wash with plenty of soap and water. P304 + P340: IF INHALED: Remove victim to…

  • Powder Pack Reagents are pre-measured, unit dose reagents that have been formulated for use in Lovibond’s Aqua Comparator Test Kits, the SC450 Single Parameter Colorimeter Series, MC500 Multi-Parameter Colorimeter, and the SP600 Spectophotometer. These easy-to-use chemistries offer an extended…

  • UN Number: UN3316

  • …chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant Level for chlorine is 4 mg/L in drinking water. Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High…

  • UN Number: UN3316

  • …0-10 mg/L with AccuVac Iron Test Kit 2507050) Fast Easy Accurate Use them anywhere you need results. For determination of total dissolved Iron, as well as complexed iron compounds, by the 1,10 Phenanthroline Method - using FerroVer® total iron reagent. Hach Method 8008.…

  • …dilutor snapper cup, small micro test tube, 5mL micro test tube, and instructions. Range: 0-1200 & 1200-12,000 ppm MDL: 200 ppm Method: Phenanthroline (total & soluble) Note: Kit contains only enough Activator Solution to perform approximately 7 total iron tests.

  • …dilutor snapper cup, small micro test tube, 5mL micro test tube, and instructions. Range: 0-120 & 120-1200 ppm MDL: 20 ppm Method: Phenanthroline (total & soluble) Note: Kit contains only enough Activator Solution to perform approximately 7 total iron tests.

  • …total iron, thioglycolic acid solution is added to reduce ferric iron to the ferrous state. The reagent formulation minimizes interferences from various metals. Results are expressed as ppm (mg/L) Fe. Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.