Inlet Filter

Compare Tool

Select up to 3 products

Inlet Filter
1 - 32 of 210
Sort
View
Show
  • Polycap™ HD (Heavy-Duty) Capsule Filters

    GE Healthcare

    …those of gross paper filters and microporous membranes used for absolute filtration. Housing is also manufactured from polypropylene with all bonds fused and no extraneous materials such as glues, adhesives, metals, mold release agents or surfactants are used. Stepped barb inlet and outlet fittings…

  • Solvent Inlet Filter for Agilent HPLC Systems

    Restek

  • Whatman Solvent IFD In-Line Filter/Degasser (IFD)

    GE Healthcare

    …suitable to filter and degas these solvents. In-line filter design The Solvent IFD’s all-polypropylene housing is sealed by a security ring. The filter includes fittings to accommodate 1/16”–1/8” tubing and an air vent on the inlet with luer lock cap to enable priming. The in-line filter works…

  • Whatman Aqueous In-Line Filter/Degasser (IFD)

    GE Healthcare

    …phase preparation. In-line filter construction and function Whatman Aqueous IFD have a polypropylene housing sealed by a security ring, fittings to accommodate 1/16”-1/8” tubing, and an air vent on the inlet with luer lock cap to enable priming. An in-line filter works on the principle of…

  • Swinny Filter Holder

    MilliporeSigma

    …pressure filtration. The filter holder is useful for sterilizing tissue culture media or ultracleaning HPLC samples, solvents, etc. Sample is introduced into the filter holder by a syringe connected to the inlet Filter holder can be autoclaved with the filter in place Stainless steel…

  • Polycap TF PTFE Membrane Capsule Filters

    GE Healthcare

    …sizes, 500 or 1000 cm 2 . Inlet and outlet fittings are 1/2" (3/8" to 1/2" tubing) or 1/4" (1/4" to 3/8" tubing) step barb (SB) or 1/4" Male National Pipe Thread (MNPT) inlet fittings as noted below. Filters are sold individually. *@ 1.0 bar (14.5 psi)   ** Filters prewetted with methanol

  • Puradisc™ 13 Syringe Filters

    GE Healthcare

    …syringe filters are designed for quick and efficient filtration of samples. Syringe filters are produced from pigment-free polypropylene and have standard inlet and outlet luer connections. Sterile filters are supplied in medical-grade blister pack for critical applications. Filters are autoclavable…

  • Millipak® Disposable Filter Units

    MilliporeSigma

    Millipak disposable filter units are stacked disc filters designed for the removal of particles and microorganisms from liquids and gases. The stacked disc design allows minimal hold-up volume and particle shedding, making Millipak units ideally suited for high value-added applications. All Millipak…

  • In-Line Filter Holder

    Pall Life Sciences

    Lightweight Filter Holder for Particulate Sampling Domed inlet provides uniform sample distribution on the filter Delrin plastic offers broad chemical compatibility and material strength Accepts 25mm filter discs Lightweight for venting and air monitoring applications

  • Microsyringe Filter Holders

    MilliporeSigma

    Reusable filter unit used to ultraclean or sterilize small volumes dispensed by syringe. 25mm microsyringe filter holder Stainless-steel housing Polytetrafluoroethylene (PTFE) seals Filtration area: 3.9cm2 Luer-Lok™ inlet Male Luer-Slip™ outlet …

  • Target HPLC Syringe Filters

    National Scientific

    …membrane filters 7 membrane types Female Luer-Lock inlet, male Luer-slip outlet Solvent resistant polypropylene housings PES, GMF, Polypropylene and Cellulose Acetate membranes are certified for Ion Chromatography The polypropylene housings with all Target syringe filters

  • Puradisc 4 Syringe Filters

    GE Healthcare

    …syringe filters are designed for quick and efficient filtration of samples. Syringe filters are produced from pigment-free polypropylene and have standard inlet and outlet luer connections. Sterile filters are supplied in medical-grade blister pack for critical applications. Filters are autoclavable…

  • MiniKap® Point-of-Use Microfiltration Filters

    Spectrum Med

    Excellent for water & gas filtration systems, MiniKap HF filter provides the filtration efficiency of the 0.2 µm DynaFibre® & air vent fiber in a device conveniently equipped with a 1/4" MNPT, Luer-Lok or hose barb inlet connection.

  • Puradisc™ Syringe Filters

    GE Healthcare

    Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer) and outlet (male luer) connections. Options include a sterile, medical-grade blister pack for critical applications and a special tube tip outlet that allows the sample to be accurately…

  • Syringe Filters

    Celltreat Scientific

    …which contains a variety of filter types and pore sizes suitable for numerous applications.  The filters are heat sealed in the housing, providing a reliable seal without the use of glues or sealants. All filters are designed with Female Luer-Lock inlets and Male Luer-Lock outlets. Gamma…

  • Solvent Inlet Filters

    Thermo Scientific

    For HPLC Systems Stainless steel 10µm inlet filters for longer lifetime No tools required for replacement Bottom-of-the-Bottle solvent filters: Efficient draw 100% PTFE polymer, including 2µm filter Built-in helium sparge port and frit

  • Polycap As Nylon Membrane Capsule Filters

    GE Healthcare

    …risk when filtering into a bottle, flask or other container. Inlet and outlet fittings are 1/2" (3/8" to 1/2" tubing) or 1/4" (1/4" to 3/8" tubing) step barb (SB), except 4651B03, B17 and B21 which have 1/4" Male National Pipe Thread (MNPT) inlet fittings. Filters are sold individually.…

  • Anotop IC Disposable Syringe Filters

    GE Healthcare

    Ultra low leaching filters for Ion Chromatography sample preparation Alumina matrix Highly efficient retention of particles larger than stated pore size Low hold-up volume Offer better consistency of analytical results and longer column life Non-sterile Anopore…

  • Polycap™ TC Polyethersulfone Capsule Filters

    GE Healthcare

    …bell. Inlet and outlet fittings are 1/4" (for 1/4" to 3/8" tubing) or 1/2" (for 3/8" to 1/2" tubing) step barb (SB). Typical uses include pharmaceutical aqueous solutions, tissue culture media, virus suspensions, particle counting solutions and others. Filters are sold…

  • Acro® 50 Vent Devices with PTFE Membrane

    Pall Life Sciences

    …with a variety of inlet and outlet connectors ?Applications: Venting bioreactors, fermentation tanks, and carboys Sterile gas purging of culture vessels Filtering aggressive solvents ? Materials of Construction Filter Media: PTFE on a…

  • Solvent Filters for G1311/12/54A Pumps

    Agilent Technologies

    Unfiltered solvents or solvents contaminated with microbial growth can clog solvent inlet filters, reducing the lifetime of the filter and impacting pump performance. Remember to clean or replace the solvent inlet filters at least once every 3 months.

  • Whatman Puradisc Syringe Filters – Aqua 30 for DOC

    GE Healthcare

    …hydrophilic cellulose acetate syringe filter media Prewashed cellulose acetate (CA) syringe filter for reduced organic carbon extractables Designed for sample preparation in support of dissolved organic carbon and chemical oxygen demand analysis Standard inlet and outlet luer connectors From the…

  • Low-Pressure Slip-On Inlet Filter for Mobile Phase Reservoir

    Restek

    …to a corrosion-resistant 316 stainless steel filter element. The slip-on filter easily attaches to the pump inlet line, without the use of wrenches. The universal 1/8" OD tip accommodates standard PTFE tubing inner diameters. The cylindrical filter is standard 10 µm porosity. Fits Altex,…

  • Hub-Cap Filter Kit

    Restek

    Kit includes: bottle adaptor, bottle adaptor nut, filter inlet cap, grid support, vacuum hose barb, tube compression fitting, 47 mm grid, 47 mm 0.22 µm filter membrane, 47 mm 0.45 µm filter membrane, 1/4" OD x 1/8" ID ultra chemical resistant, FEP-lined Tygon tubing (3'),…

  • Aqueous IFD And Solvent IFD In-Line Filters/Degassers

    GE Healthcare

    …construction Integrity testable (Bubble Point Method) Air vent on inlet with luer lock cap Nylon or Polypropylene (PP) filter media Whatman in-line filter/degassers (IFD) connect directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Aqueous IFD…

  • Whatman GV 050 Series Glass Vacuum Filtration Device

    GE Healthcare

    …in dry heat to 180°C.Can be used up to 200°C.GV 050 Series GV 050/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, silicone cap and supplied with air inlet, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Acrodisc® Syringe Filters

    Pall Life Sciences

    …housing with female Luer-Lock inlet and standard male slip Luer outlet connections. All membranes are HPLC certified for low levels of UV-absorbing extractables. Typical hold-up volume: <100µL. 1229P20 AutoPack packaging features 25 filters pre-packaged in each dispenser…

  • Aerosol Standard Filter Holder, 47mm, Stainless Steel

    MilliporeSigma

    …for particulate contamination analysis. Standard holder Closed system connection, with inlet dispersion chamber and 11 mm O.D. inlet/outlet connections. Open-type holder Full-area inlet (11 mm O.D.) for open atmosphere sampling. Threaded outlet (11 mm O.D.) tubing connectors fit…

  • Low-Pressure CPI Inlet Filter for Mobile Phase Reservoir

    Restek

    …stainless steel knurled cap and Tefzel CPI ferrule seal to 1/8" OD PTFE tubing when finger-tightened onto the precision-machined filter holder. The filter element is replaceable. Standard 10 µm porosity protects delicate pump components from particles but introduces very little pressure…

  • HEPA Inlet or Exhaust Filter

    Labconco

    Inlet or exhaust HEPA For Labconco Multi-Hazard Glove Boxes Use as replacement filter or optional second outlet filter for removal of 0.3 micrometer particulate contaminants

  • Nylon-66 Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Nylon-66 membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.