Injectable Vial

Compare Tool

Select up to 3 products

Injectable Vial
1 - 32 of 129
Sort
View
Show

Simport

  • Combi PAL and GC PAL Liquid Injection Vials and Caps

    Agilent Technologies

    Agilent provides a wide variety of micro and 2 ml vials and caps compatible with the Combi Pal and GC Pal listed in the Vials and Caps section. Below are the most popular vials and caps.

  • HTC PAL Liquid Injection Vials and Caps

    Agilent Technologies

    Agilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC.

  • Premium Pack Amber Glass Vials with 0.060in. Septa

    EP Scientific Products

    …own individual cell for ultimate vial protection. Hard foam sectional design allows clusters of nine (9) vials to be separated from the pack for convenient handling. Each vial includes an assembled dust cover to prevent particulate accumulation and protect the injection surface prior to use.  …

  • 13-425 Closures for 15x45mm Screw Thread Vials

    Thermo Scientific Sun SRi

    …all SUN-SRi 13-425 screw thread vials Pre-assembled septa allows for vacuum release where more than half of vial contents will be removed Integral septum caps are an economical choice for HPLC applications Bonded septa caps resist dislodging during injection during use of large diameter…

  • Clear Borosilicate Sample Vials with Green PP Hole Cap & PTFE/Silicone Septa

    Qorpak

    Clear Screw Thread Vials offer maximum visibility. These general purpose glass Vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Attached polypropylene hole caps are known for good impact strength, cost effectiveness, and…

  • Whatman Mini-UniPrep G2 Syringeless Filters

    GE Healthcare

    …G2 autosampler vials Once compressed, Mini-Uniprep G2 can be placed into any autosampler that accepts a 12 mm × 32 autosampler vial for injection into your instrument. Alternatively, the septum can be pierced with a needle and the sample drawn off for manual injection into an analyzer.…

  • Amber Borosilicate Sample Vials with Green PP Hole Cap & PTFE/Silicone Septa

    Qorpak

    Amber Screw Thread Vials offer protection from harmful light and UV rays for light sensitive products. These general purpose glass vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Thermoset (phenolic) hole caps provide the widest…

  • EPA VOA Premium Pack Vials

    EP Scientific Products

    …top vials are assembled with polypropylene caps with 0.060" or 0.125" PTFE/silicone septa Closed top vials are assembled with polypropylene caps with 0.125" PTFE /silicone septa Included polyethylene dust covers protect injection surface from contamination prior to use Vials are…

  • Target DP* 9mm Assembled Vial Kits

    National Scientific

    …DP 9mm Wide Opening 9mm Closure A wide opening vial deserves a wide opening closure. Utilizing AVCS technology, the C5000 series wide opening closure increases the available injection area by over 7% providing greater area for injection needle penetration. National C5000 Series Target…

  • Freund's Incomplete Adjuvant

    MP Biomedicals

    …mycobacteria in Complete Freund's attracts macrophages and other cells to the injection site which enhances the immune response. For this reason, the Complete Freund's Adjuvant is used for the initial injections. To minimize side-effects, Incomplete Freund's Adjuvant is used for the…

  • Wide Opening Snap Top Vials

    Agilent Technologies

    …temperatures to 135°C. Can be used with crimp or snap caps. 1.5 mL Wide Opening Snap Top High Recovery Glass Vials (2714S59) Wide opening, 1.5 mL vials with 30 µL reservoir. For sample concentration and injection without transferring to microvolume inserts. Can be used with snap or crimp caps.

  • 10-425 Wide Opening Screw Thread Vials

    Thermo Scientific Sun SRi

    Vials feature a 6mm diameter opening for easy filling 10-425 vials are suitable for many instruments where the vial remains in sample trays during injection Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate class Glass vials have a graduated, write-on patch for…

  • 2.0 mL, 9 mm Short-Cap, Screw-Vial Closures (Polypropylene, preassembled)

    Restek

    Choose preslit caps (available for some vials) to reduce the risk of needle bending, release vacuum from high-volume injections, and improve injection reproducibility when greater than 20% of vial volume is withdrawn.

  • Target Crimp Top Vial System, 2 mL, 12 x 32 mm Glass Vials

    National Scientific

    …Tightly controlled crown formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . High Recovery vials are wide opening, 1.5 mL with a 30µL reservoir. Perform sample concentrations and injections in one vial. Allow virtually total recovery of the sample.

  • Vials PP 12X32mm 0.3ml 8-425

    Thermo Scientific Sun SRi

    Suitable for instruments where vials remain in the sample tray during injection Feature a nominal 5mm diameter opening and 12x32 profile Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate glass Glass vials feature a graduated, write-on patch for convenient sample…

  • Empty Sterlized Vials

    ALK-Abelló

    Empty injection vials are a sterile and nonpyrogenic Made with USP Type 1 glass

  • Premium Pack Amber Glass VOA Vials with 0.125in. Septa

    EP Scientific Products

    …ultimate vial protection. Hard foam sectional design allows clusters of nine (9) vials to be separated from the pack for convenient handling. Each vial includes an assembled dust cover to prevent particulate accumulation and protect the injection surface prior to use. Amber vial designed for…

  • Polypropylene Screw Caps with Bonded Septa

    Agilent Technologies

    …excess evaporation and providing a proper seal with the vial. Septa are completely secure and will not fall into the vial during injection. These caps are made with PTFE/Silicone septa for excellent chemical resistance and multiple injections. This product is only available to U.S. Domestic…

  • 6 mL Crimp Top Vials, Caps and Septa for 1100/1200 Series Autosamplers

    Agilent Technologies

    Agilent minivials are designed to allow for reproducible injections of minute quantities, making your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections.

  • Caps and Septa for 2.0 mL Big Mouth Step Vials (preassembled)

    Restek

    Choose preslit caps (available for some vials) to reduce the risk of needle bending, release vacuum from high-volume injections, and improve injection reproducibility when greater than 20% of vial volume is withdrawn.

  • 6 mL Screw Top Vials, Caps and Septa for 1100/1200 Series Autosamplers

    Agilent Technologies

    Agilent minivials are designed to allow for reproducible injections of minute quantities, making your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections.

  • Target DP 9mm Vial Closures

    National Scientific

    …while improving autosampler operation Wide opening vial deserves a wide opening closure. Utilizing AVCS technology, the C5000 series wide opening closure increases the available injection area by over 7% providing greater area for injection needle penetration. National C5000 Series Target DP…

  • Snap Top Micro-V Vials

    Agilent Technologies

    Borosilicate glass 1.5 mL volume 12 x 32 mm Compatible with snap or crimp closures Designed for center needle during sample injection Not recommended for Vortex or in-vial sample concentration

  • High Recovery Glass Vials

    Agilent Technologies

    Crimp top 1.5 mL capacity Wide opening 1.5 mL wide opening crimp top high recovery vials have a 30 µL reservoir. High recovery glass vials are for sample concentration and injection without transferring to microvolume inserts.

  • Vials PP 400ul Conical 10-425

    Thermo Scientific Sun SRi

    Vials feature a 6mm diameter opening for easy filling 10-425 vials are suitable for many instruments where the vial remains in sample trays during injection Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate class Glass vials have a graduated, write-on patch for…

  • Vials and Caps for CE

    Agilent Technologies

    PUR caps are recommended to help prevent sample or buffer evaporation even after multiple injections.

  • Crimp Top Micro-V Vials

    Agilent Technologies

    … Less than 5 µL dead volume Micro-V vials are compatible with standard crimp closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. They are designed for center needle position during sample injection. Not recommended for Vortex or in-vial sample…

  • Screw Thread Micro-V Vials

    Agilent Technologies

    Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume.  Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of…

  • Wide Opening Crimp Top Vials

    Agilent Technologies

    …Crimp Top High Recovery Glass Vials (2714Q59 and S49) 1.5 mL Vials with 30 µL reservoir For sample concentration and injection without transferring to microvolume inserts. Crimp Top Vials with Fixed Inserts (2715G02) Crimp Top Extreme Recovery Vials (2714U76) Patented design with…

  • 8-425 Standard Opening Screw Thread Vials

    Thermo Scientific Sun SRi

    Suitable for instruments where vials remain in the sample tray during injection Feature a nominal 5mm diameter opening and 12x32 profile Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate glass Glass vials feature a graduated, write-on patch for…

  • Microvolume Inserts For Wide Opening Vials

    Agilent Technologies

    …are self-aligning and stand straight. Conical Glass Inserts (2714S15) Conical inserts require no springs and are ready to drop into the vial for injections. The most economical choice for microvolume sampling. Flat Bottom Inserts (2714M89, S16, S17) An economical limited-volume alternative.…

  • CoolCell® Stem Cell Cryopreservation Systems

    BioCision

    …unbreakable, open easily when frozen, and are not cold to the touch when frozen - no "frosty" fingers. Holds 6 or 12 injectable vials. Vial fill volume: 1 mL per vial. Includes the XT Starter benchtop Cooler and CoolCell SV2/SV10 cell freezing container for 12/6 injectable vials.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.