Indicators Co2

Compare Tool

Select up to 3 products

Indicators Co2
1 - 31 of 31
Sort
View
Show
  • …Dioxide (CO2) concentrations Maintenance free NDIR (non-dispersive infrared) CO2 sensor Indoor Air Quality displayed in ppm with Good (380 to 420ppm), Normal (<1000ppm), Poor (>1000ppm) indication User programmable High/Low Visible and Audible CO2

  • CO2 Indicators are intended to be used in conjunction with carbon dioxide generating systems used for the growth of bacterial cultures. The CO2 Indicator signify that the carbon dioxide concentration in the atmosphere is 3% or greater in jar or pouch incubation systems.

  • …or CO2 enriched atmospheres. The generation of these atmospheres is achieved either with gas-generating tablets or with iron powder and inorganic carbonate. In either method, the reaction takes place within a container designed for this purpose. An indicator is placed in the container to indicate

  • …(TOC) by the Direct Method which follows an acid persulfate digestion to oxidize TOC to carbon dioxide (CO2). The generated CO2 passes through a gas-permeable membrane into an indicator solution is measured spectrophotometrically. Easy and safe handling: The innovative vial and reagent…

  • (CO2), Air Temperature and Humidity Checks for Carbon Dioxide (CO2) concentrations Maintenance free NDIR (non-dispersive infrared) CO2 sensor Indoor Air Quality displayed in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication

  • …increments to -75°C for CO2 and -150°C. The control module digital display shows actual temperature when button is pushed. These systems operate on a continually recharged battery and include all hardware except the supply cylinder. An indicator light glows when activated. 5144R75…

  • Smiths Medical Sodasorb® CO2 Absorbents

    Smiths Medical ASD, Inc.

    Medical-grade Soda Lime USP-NF is the original CO2 absorbent and has been the worldwide market leader. Specially designed to proved exceptional CO2 absorption performance, superior color indication contrast, and optimal resistance to dusting. Intended for

  • …calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Wi-Fi Datalogging CO2 Meter Monitor Carbon Dioxide,…

  • The CO220 measures Carbon Dioxide (CO2), Air Temperature, and Humidity with user selectable high/low alarms. Measures CO2 up to 9,999ppm and features six emoticons to indicate indoor air quality levels. Visible and Audible CO2 warning alarm. Displays Year, Month, Day and Time. Manually…

  • …samples. Surface waters typically contain less than 10 ppm (mg/L) dissolved CO2, while ground waters, particularly if deep, may contain several hundred ppm (mg/L). The Caustic Titrant with pH Indicator Method References: APHA Standard Methods, 22nded., Method 4500-CO2C -1997.…

  • …environment and the pressure change provides an indication of the rate of CO2 production. Yeast will be exposed to four different sugar solutions and the overall pressure changes for fermentation in each sugar solution will be compared, providing an indication as to how effective the fermentation…

  • …is the pH indicator. Heterofermentative lactic acid bacteria produce CO2, lactic acid, acetic acid, ethanol and mannitol. Homofermentative lactic acid bacteria produce only lactic acid. Homofermentative lactic acid bacteria produce lactic acid from fructose and is indicated by yellow…

  • …green is the pH indicator. Heterofermentative lactic acid bacteria produce CO2, lactic acid, acetic acid, ethanol and mannitol. Homofermentative lactic acid bacteria produce only lactic acid. Homofermentative lactic acid bacteria produce lactic acid from fructose and is indicated by yellow colour…

  • Phenolphthalein

    MP Biomedicals

    …alcoholic solution as an indicator in titrations of mineral and organic acids and most alkalies. Not suitable for ammonia. Very sensitive to CO2; and, in estimating carbonates, the liquid must be boiled. Borax can be titrated with phenolphthalein as an indicator only when glycerol is…

  • …Traceable® Certificate which assures accuracy from an ISO/IEC 17025:2005 (1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories…

  • …Displays power consumption, CO2 emissions and heater manipulated variables on the control panel. Adopts anti-fouling casters which prevents wheel contamination during transportation. Improved visibility of HEPA filter replacement timing by three color indication. Enhanced safety with its…

  • Leibovitz's Medium was specifically designed to grow cells in a CO2 free atmosphere. The standard sodium bicarbonate/CO2 buffering system is replaced by combination of free basic amino acids, phosphate buffers and higher levels of galactose and sodium pyruvate. As a result, the medium does not…

  • Leibovitz's Medium was specifically designed to grow cells in a CO2 free atmosphere. The standard sodium bicarbonate/CO2 buffering system is replaced by combination of free basic amino acids, phosphate buffers and higher levels of galactose and sodium pyruvate. As a result, the medium does not…

  • …resistant, reflective white top plate surface that is easy to clean. Large top plate: Stirs up to 9 vessels at once with helpful position indicators. Microprocessor control: Precisely regulates speed through the entire range. Stirring function, with continuous duty motor and magnet, maintains…

  • 1M HEPES Buffer

    MP Biomedicals

    …The addition of 10–25 mM HEPES provides extra buffering capacity when cell culture requires extended periods of manipulation outside of a CO2 incubator. HEPES is a good buffering choice for many cell culture systems because it is membrane impermeable, has limited effect on biochemical…

  • …kit available for added security Lockable Plate Protects Power On-Off Switch, preventing accidentally shut off Audible and Visual Alarms indicate high and low temperature conditions, power failure, low battery, fault conditions as well as when filter needs to be cleaned Automatic Restart…

  • …adapater kit available for added security Lockable plate protects power on-off switch, preventing accidental shut off Audible and visual alarms indicate high and low temperature conditions, power failure, low battery, fault conditions as well as when filter needs to be cleaned Automatic restart…

  • …continuous mode Audible buzzer when timed mode reaches zero Slow ramping start-up feature reduces potential splashing Timer and speed indicated on discrete LED displays Rotary knobs for setting speed and time Low-profile rubber feet designed to minimize vibration and provide…

  • …powder and inorganic carbonate. In either method, the reaction takes place within a container designed for this purpose. An indicator is placed in the container to indicate when anaerobiosis is complete. Larger jar holds up to thirty-six 100 mm style Petri dishes. Complete system similar to…

  • … The luciferase from Photinus pyralis (American firefly) catalyzes the following reaction: ATP + D-luciferin + O2? oxyluciferin + PPi + AMP + CO2 + light. The quantum yield for this reaction is about 90%. The resulting green light has an emission maximum at 562 nm. The Michaelis equation has…

  • …purifier tubes simultaneously remove oxygen, water vapor, CO, CO2, most sulfur compounds, most halogen compounds, alcohols, phenols to less than 10ppb. They also purify helium, hydrogen, nitrogen, argon and methane. Color change indicates purifier exhaustion. Glass body does not diffuse air or…

  • …ambient temp. Calculated measurement of combustion efficiency CO2, CO (air-free) and excess air Easy access to sensors New B-Smart® technology for in-field pre-calibrated sensor replacement O2 and sensor life indicator Calibration reminders Fyrite® User Software (PC) and…

  • …equilibrium. Lactose, sucrose and dextrose are the fermentable carbohydrates. Sodium thiosulphate and ferrous ions make H2S indicator system. Phenol red is the pH indicator. Organisms that ferment glucose produce a variety of acids, turning the colour of the medium from red to yellow. More…

  • …Sodium thiosulphate and ferric ions make H2S indicator system. Sodium thiosulphates are also inactivators of halogens and can minimize its toxicity in the testing sample, if any during microbial limit tests. Phenol red is the pH indicator. Organisms that ferment glucose monohydrate…

  • …Lactose, sucrose and glucose are the fermentable carbohydrates. Sodium thiosulphate and ferric or ferrous ions make H2S indicator system. Phenol red is the pH indicator. Organisms that ferment glucose produce a variety of acids, turning the colour of the medium from red to yellow. More amount…

  • …Lactose, sucrose and glucose are the fermentable carbohydrates. Sodium thiosulphate and ferric or ferrous ions make H2S indicator system. Phenol red is the pH indicator. Organisms that ferment glucose produce a variety of acids, turning the colour of the medium from red to yellow. More amount…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.