Incubator 37 C

…with 254nm shortwave UV Benchtop incubator is designed to provide precise temperature control and uniformity throughout the chamber. Users can decontaminate the chamber between experiments with the built-in overhead shortwave UV (254 nm). Incubator has maximum temperature of 68°C.…

Model SCO5W water jacketed CO₂ incubator and is an ideal unit for cell culture applications. It provides a precisely controlled, accurate, pure environment throughout the culturing process. Shel Lab CO₂ incubators are designed to provide the uniform temperatures and highly…

…steel (AISI 430) Protect delicate samples with stable temperature conditions: uniformity of up to ± 0.5 °C and temperature stability of 0.4 °K at 37 °C Maximum convenience Large, easy-to-view, vacuum fluorescent display with simple-to-use touch button…

The Mini Laboratory incubator is great for places with little space or when you need a dedicated incubator for microplates or petri dishes. The unit has set temperature of 37°C and this can be adjusted with the dial in the back of the unit. The chamber is accessed through a see-through, flip-up…

…Incubator is a universal incubation device designed for both the Steam and the EO gas indicator vials with 13 cavities for for incubation and 1 vial crushing cavity. The incubation temperature can be selected by setting the toggle switch on the bottom of the unit. The recommended incubation temperature…

…once dry  IS-A93 - Stand for AEOLUS Compact Incubator Shakers: Adds 13.4" height to IS-AMA / ACMA; Recommended for use with single and double stacks IS-A64W - Remote Monitoring and Control for AEOLUS Incubator Shakers: Connects each unit to users' phones via…

…YOUR CULTURES: HettCube incubators combine the advantages of natural and forced convection to provide a stable and uniform environment for cultures. The fan is housed outside of the usable space, providing higher throughputs and limiting airflow inside the incubator. Temperature is primarily…

The Quincy Lab 180 series incubators pick up where the 140 series leaves off as far as temperature range, increasing the upper limit to 200°F (93°C). This series of models were also developed for laboratories that need a dependable, compact incubator for cultures, test kits, eggs and…

…cell culture applications. Model SCO10A is a stacked version of our SCO5A incubator. It provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations. Standard Design Features: Infrared (IR) CO₂ Sensor…

Large capacity CO₂ incubator is ideal for roller bottle apparatus and high-volume tissue culture applications and cell harvesting. It provides a precisely controlled, accurate, pure environment throughout the culturing process. Includes a two year limited warranty. Standard Design…

Model SCO2W water jacketed CO₂ incubator and is an ideal benchtop unit for cell culture applications. It provides a precisely controlled, accurate, pure environment throughout the culturing process. Shel Lab CO₂ incubators are designed to provide the uniform temperatures and…

Model SCO6WE is our basic water-jacketed CO₂ incubator and is ideal for laboratories with tight budgets. It provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubation needs. Although they do not have a humidity display,…

Model SCO6AD features the ultimate in contamination control. This unit is ideal for cell culture labs where contamination can result in significant losses of both time and money. The SCO6AD boasts the most effective decontamination cycle on the market – dry heat for two hours at 180°C.…

Incubated or refrigerated models Use on benchtop or stack two high Two adjustable height shelves for sample storage Temperature, speed and time on separate displays Warranties: Five years on parts, one year on labor and lifetime on mechanism Choose from two temperature ranges to…

HTS for inhibitor screening and evaluation of nitric oxide synthase inhibitors. Homogenous “mix-incubate-measure” type assay. Can be readily automated on HTS liquid handling system. Can be completed in less than 3 hours if assay performed at 37°C. Method: OD540nm

…optimal 37°C (±°C ) outside of the incubator. The unit is water resistant and safe for cleaning with Ethanol or IPA. UL approval pending. Keep dishes outside the incubator longer; 37°C plate protects cell viability; no need to return to the incubator repeatedly Reduces…

…is designed for biotechnological and pharmaceutical laboratories. The temperature range is from 5 °C above ambient up to +80 °C with temperature uniformity of ±0.3 °C at 37 °C . The ES-20/80 has a settable speed control range of 50-400 rpm (in 10rpm increments). The inner…

HTS for inhibitor screening and evaluation of arginase inhibitors. Non-radioactive assay. High-throughput. Homogenous “mix-incubate-measure” type assay. Can be readily automated on HTS liquid handling system Rapid and reliable. Can be completed in less than 2 hours and no…

HTS for inhibitor screening and evaluation of acetylcholinesterase inhibitors. Fast and sensitive. Linear detection range 10 to 600 U/L for a 10 minute reaction at 37°C. Homogeneous "mix-incubate-measure" type assay. Can be readily automated for processing tens of thousands…

HTS for inhibitor screening and evaluation of glucose-6-phosphate dehydrogenase inhibitors. Non-radioactive assay. Homogenous “mix-incubate-measure” type assay. Can be readily automated on HTS liquid handling system. Rapid and reliable. Can be completed in 30 minutes and no…

…filters Incubation dishes Incubation, collection and sample storage tubes Lysis, wash and elution buffers Required Lab Equipment & Consumables Vacuum pump Microcentrifuge Filtration system, 47 mm frit Pipets and filter tips Incubator (37 °C for petri…

…tangles that occur in the hippocampus, neocortex, and amygdala of patients with Alzheimer's disease. Reconstitution: For maximal biological activity, dilute the stock in calcium-free PBS to 1 mg/ml and incubate at 37 C for 4 days. Other Notes: Lyophilized from 0.1% TFA in H2O

For quantitative enzymatic determination of urea. Fast and sensitive. Linear detection range (20 μL sample): 50 to 1000 μM urea in 96-well plate assay. The procedure involves adding a single working reagent, and reading the absorbance after 30 minutes. Room temperature assay. No…

For quantitative enzymatic determination of urea. Fast and sensitive. Linear detection range (20 μL sample): 1 mg/mL (0.17 mM) to 100 mg/mL (17 mM) urea in 96-well plate assay. The procedure involves adding a single working reagent, and reading the absorbance after 5 minutes. Room…

Acetaldehyde determination in biological and food/beverage samples. Fast and sensitive. Linear detection range (10µL sample): 4 µM to 4 mM acetaldehyde in 96-well plate assay. The procedure involves adding a single working reagent, and reading the absorbance after 30 minutes. …

Acetaldehyde determination in biological and food/beverage samples. Fast and sensitive. Linear detection range (50µL sample): 0.5 µM to 60 µM acetaldehyde in 96-well plate assay. The procedure involves adding a single working reagent, and reading the absorbance after 30…

…samples Easy access to working chamber Many applications: Plant propagation Humidity tests Simulation of tropical conditions Incubation of complete instruments Corrosion testing Choice of analogue or digital control Constructed from clear Acrylic® polymer…

…membrane-filtered, autoclaved Not DEPC-treated Protease and DNase-free Designed for use in all molecular application Nuclease-free Water incubated for 16 hours at 37°C results in a DNA pattern free of detectable nuclease degradation as determined by agarose gel electrophoresis. …

…enzyme is stable for several weeks, stored at 2 to 8 °C; for longer storage, freezing is recommended. A stock solution may be made ( e.g. , at c = 5 U/100 μl). The enzyme looses approx. 50% of its activity after incubation at 37 °C for 24 hours. Specificity: Cleaves terminal…

…surface.5. Incubate at room temperature or 37 C, covered, for approximately 1.5 hours.6. After incubation, aspirate any remaining material.7. Rinse coated surfaces carefully with sterile water and avoid scratching surfaces.8. Coated surfaces are ready for use. They may also be stored at 2-10 C damp…

…adenylate cyclase activity 6-fold, measured as [ 3 H]-cAMP present, using approx. 70,000 CHO cells after incubation for 90 min at 37 °C with [ 3 H]-adenine followed by a 15 min incubation with 1 mM 3-isobutyl-1-methylxanthine (IBMX). Biochem/physiol Actions Toxin consisting of an A…

…Fetal Bovine Serum. 2) At the end of the assay add 0.01 mL AB Solution (MTT) to each well. Mix by tapping gently on the side of the tray. 3) Incubate at 37 C for cleavage of MTT to occur. Optimal times may vary according to the assay, but four hours is suitable for most purposes. At the end of this…