Impeller

Compare Tool

Select up to 3 products

Impeller
1 - 32 of 72
Sort
View
Show
  • ProCulture® Magnetically Driven Vortex Impeller Only

    Wilmad-LabGlass - SP Scienceware

    Vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration of media All components are autoclavable Impeller components are made from FDA approved materials

  • Assy, Impeller - 1000 ml Celstir

    DWK Life Sciences (Wheaton)

  • Assy, Flex Impeller - 500 ml Magnaflex

    DWK Life Sciences (Wheaton)

  • Assy, Flex Impeller - 125 ml Magnaflex

    DWK Life Sciences (Wheaton)

  • ProCulture® Spinner Flasks with Angled Sidearms and Magnetically Driven Vortex…

    Wilmad-LabGlass - SP Scienceware

    Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads accept…

  • ProCulture® Spinner Flasks, Wide Mouth, with Angled Sidearms and Magnetically…

    Wilmad-LabGlass - SP Scienceware

    Wide 120mm center neck to make cleaning and setup easier Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the…

  • ProCulture® Spinner Flasks, Shur-Lok® 140mm Closure, with Angled Sidearms and…

    Wilmad-LabGlass - SP Scienceware

    …compression O-ring design to ensure tight seal of the flask Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating…

  • Impellers & Shafts for Caframo Overhead Stirrers

    Caframo

    Thomas No. 1177M38 Impeller. Mixer. Blade. Crossed Blade. Radial Flow. High Speed. Low Viscosity. 316L SS. Electropolished. High Shear. High Vortexing. Thomas No. 1177M39 This radial flow impeller is effective for high speed, low viscosity mixing. The 50 mm (2”) diameter…

  • Pump, Submersible

    Franklin Electric

    …1.1 ampere motor, sealed and permanently lubricated, enclosed in epoxy-coated, cast-aluminum housing Polypropylene bottom cover and impeller Removable polyethylene screen cap encircles pumping head to prevent large particles from clogging intake. Detachable, polypropylene…

  • Stirrer Accessories

    Thermo Scientific Nalgene

    Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

  • Coated Steel Blowers

    Labconco

    Phenolic-coated impeller and housing Dry powder epoxy-coated steel base and removable weather cover Belt-drive motor with adjustable sheave and self-adjusting gravity belt tightener

  • ProCulture® Magnetically Driven Cap Assembly Only

    Wilmad-LabGlass - SP Scienceware

    …PBT 70, 100 and 120 mm caps supplied with red rubber liner and Ultem impeller retaining nut Shur-Lok® 140 mm cap design has an unique compression O-ring design to insure tight internal seal of the flask and is supplied with Ultem impeller retaining nut All components are autoclavable

  • Accessories for Caframo Overhead Stirrers

    Caframo

    …Torque and Compact Caframo stirrers, accepting impeller shafts up to 10 mm (3/8”) diameter. Chuck key includes tool for removal from stirrer’s output shaft for cleaning or replacement. Through shaft allows for easy adjustment of impeller height. Compatible with Caframo chuck guards, to…

  • Double Sidearm Celstir® Spinner Flasks

    DWK Life Sciences (Wheaton)

    …Internal Teflon-covered impeller assembly permits gentle stirring of cell suspension cultures in sealed flasks by placing on a magnetic stirrer. Nylon bearing sleeve attached to the underside of cap supports Kynar®-coated, stainless steel shaft, with magnetic impeller at lower end, suspended…

  • Magna Flex™ Microcarrier Spinner Flasks

    DWK Life Sciences (Wheaton)

    impeller during handling or decanting to prevent damage to cells or microcarriers. Sizes 500 mL and larger can accommodate the Wheaton Vented Cap (Cat. No. W240751). Designed for microcarrier cultures with a magnetic stirrer Gentle stirring action provided by a bulb-shaped glass impeller

  • Reusable Glass Spinner Flasks with Angled Sidearms

    Corning

    …media moving and improving aeration at the surface. The Reusable Glass Spinner Flask features an improved impeller design that provides efficient slow-speed mixing. This Vortex impeller extended paddle design ensures constant top to bottom motion of the liquid. Bottom contours on the paddle hug…

  • CheMobil Flow Indicator

    Bürkle

    …of the flow velocity of liquids or gases being transported through hose connections. The flow indicator with impeller functions in both directions and in any position. The impeller starts to rotate at a flow rate about 150 ml/min (liquids). Operating temperature CheMobil PMP max. +60…

  • 9EN Series Effluent Pumps

    Franklin Electric

    …to handle 3/4" solids. Permanent split capacitor (PSC) motor, heavyduty cast iron housing, volute and cover, non-clog thermoplastic elastomer impeller and thermal overload protection. The "RF" automatic models feature a “piggyback” mechanical float switch with an “on” range of 9" to 14" and a…

  • ProCulture® Spinner Flasks Only with Angled Sidearms

    Wilmad-LabGlass - SP Scienceware

    Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottm mixing Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads accept 25 mL and 50 mL pipets Flasks are manufactured from Type I,…

  • Stirrer Carboy 10 L & 20 L

    Thermo Scientific Nalgene

    Polypropylene screw closure Teflon TFE stir bar Polyvinylidene fluoride, stainless steel reinforced shaft TFE impeller Ideal for low-speed mixing of large volumes of media and buffer solutions on a magnetic stir plate For use with Nalgene 10 and 20-liter carboys with 83B (83-mm) closures …

  • Celstir Assy, Retrofit Complete w/4 Sidearms 1000ml

    DWK Life Sciences (Wheaton)

    …design is the standard flask type for cell culture. Celstir flasks feature adjustable blade impeller for increased aeration and dimpled bottom to prevent the accumulation of cells under the impeller (dimpled bottom on 125 mL size and larger). When used with the Micro-Stir®, which can operate…

  • Compact Digital Overhead Stirrer, Model BDC2002

    Caframo

    …adjustment Easy impeller adjustment saves time Set speed is maintained as viscosity changes Automatic overload protection I ncludes support rod, chuck, chuck key, external power supply, and grounded power cord. Remember to order a stand, clamp and impeller for a complete…

  • PVC Blowers

    Labconco

    …adjustment; low RPM for quiet operation; PVDF impeller is bonded directly to shaft to reduce maintenance and increase life; flow-through vent holes and louvers allow air circulation that cools the motor, prolonging motor life; convenient access to impeller assembly; self-adjusting gravity belt…

  • MD-HC Series Magnetic Drive Pumps

    Franklin Electric

    …long trouble-free service in use with harsh solutions Self-lubricating carbon impeller bushing which is impervious to fluids and long-lived in abrasive solutions Glass-filled Ryton pumping head and impeller with Ryton encapsulated driven magnet for superior chemical wear resistance Viton…

  • LiquiMobil Flow Indicator

    Bürkle

    …of the flow velocity of liquids or gases being transported through hose connections. The flow indicator with impeller functions in both directions and in any position. The impeller starts to rotate at a flow rate about 150 ml/min (liquids). Operating temperature LiquiMobil SAN max. +30°C…

  • Reusable Glass Wide Mouth Spinner Flasks with Angled Sidearms

    Corning

    Side baffles enhance aeration and agitation of flask contents Vessels are borosilicate glass Patented “stretch” impeller design ensures optimal stirring. Consistent height-to-width ratios provide greater predictability in scale up across the full range of vessel sizes.…

  • Polycarbonate Magnetic Culture Vessel

    Thermo Scientific Nalgene

    …to cultures. Two ports included for easy access to cultures Magnetic stir bar keeps cells suspended at low stirring speeds, maximizing sheer Adjustable impeller height supports process modifications Molded of lightweight and durable polycarbonate; safer than glass alternatives

  • Petite Digital Overhead Stirrer, Model BDC250

    Caframo

    …clamp, collet, mixing shaft, axial and radial mixing blades, stand, power supply, and grounded power cord. BDC250 Impeller Set (Thomas No. 1177M75) Shaft and impeller blades to fit collet of BDC250 stirrer, all electropolished 316L stainless steel. Includes one radial blade and one axial…

  • Ultra Torque Overhead Stirrer, Model BDC1850

    Caframo

    …or high-speed range Easy impeller adjustment saves time Safely encloses spinning chuck to protect user Protects chuck from splashes Includes support rod, chuck, chuck key, chuck guard, and power cord. Remember to order a stand, clamp and impeller for a complete system to start…

  • Filtermate Portable Exhausters

    Labconco

    …inherently safe design. A negative pressure plenum surrounds the positive pressure impeller so that if a leak occurs, the unfiltered air is captured and refiltered. Its variable speed, non-sparking motorized impeller may be adjusted to optimize airflows. Compact, corrosion-resistant housing of…

  • Universal Overhead Stirrer, Model BDC3030

    Caframo

    …or high-speed range Easy impeller adjustment saves time Safely encloses spinning chuck to protect user Protects chuck from splashes Includes support rod, chuck, chuck key, chuck guard, and power cord. Remember to order a stand, clamp and impeller for a complete system to start…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.