Ice Racks

Compare Tool

Select up to 3 products

Ice Racks
1 - 32 of 47
Sort
View
Show
  • Lower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…

  • Polarsafe™ Cooling Blocks

    Argos Technologies

    …cooling, freezing or heating (thawing) these blocks will provide welcome temperature control. Ideal for use on ice, dry ice, in water baths and in liquid nitrogen. The family of 5 racks will help keep biological samples upright, organized and at uniform temperatures for extended periods of…

  • Round Ice Bucket Test Tube Racks

    Bel-Art - SP Scienceware

    …and odors Fit Magic Touch Ice Buckets Racks are resistant to highly acidic and basic solutions, salts, alcohol, chloroform and phenols. Round, conical shape allows racks to rest firmly and steadily in the bucket. The racks can be used in ice or dry ice and will float in water, dry…

  • …cryogenic processes Autoclavable Self-locking design Rack and tray are made of autoclavable polycarbonate and are designed for use with most vials. The removable storage tray can be used to hold crushed ice or water. Two styles are available for 30 or 50 vials. Both feature a…

  • Specialty Cooling Chambers

    Diversified Biotech

    For use as Stand-alone units or with Ice Pans *not compatible with CoolSafe

  • CoolRack® and CoolSink™ modules

    Brooks Life Sciences

    …reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they rapidly adapt to source temperature. Cool, (snap)…

  • … Expanded Polymer Foam is chemical-resistant, impervious to moisture and odors, and unbreakable under normal use conditions Fits Magic Touch™ Ice Pans - Midi, 1 rack; Maxi up to 3 racks 36 places (1.5 ml tube racks) or 24 places (15 ml tube racks) 9 1/4 x 4 1/4" (23.5 x 10.8cm)

  • …thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and…

  • …and temperature resistance Racks float with full load of filled tubes Molded handle in center of rack for comfort and support during transport Legs allow rack to stand upright for use on benchtopUse in ice, waterbaths or on the benchtop 65mm round rack fits most 400mL beakers Commonly…

  • MicroBead Chambers

    Diversified Biotech

    …dry bath systems Microbeads tightly surround tubes, microtubes and bottles to evenly distribute temperatures Single and double-place chambers allow maximum flexibility when working with dry baths Use with dry ice in our popular Glacierbrand pans/buckets for fully customized sample cooling

  • …storage system. For 1.5mL and 2.0mL tubes. These racks fit into Labcon pipet tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can in corpo rate dry ice for use with frozen samples on the bench. …

  • …to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and temperatures up to 121°C for a variety of lab procedures. 15mL conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required. Organize and store samples with…

  • …Slants 6mL 1 Pipet, Sterile, Disposable 1 pkg Cotton Swabs, Sterile Materials Needed but not Supplied: Large beaker Hot plate or waterbath Microwave (not necessary if melting agar in a waterbath) Markers Microfuge tube racks Container of ice Recommended: Incubator (37°C) DOT Info: Non-regulated

  • …for labeling and easy sample identification  Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit 30mm racks Seven color options to keep samples and benchtop organized Half-size racks fit easily in ice and water baths

  • ChillBlock™ thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and it will…

  • Scienceware® No-Wire™ Round Racks

    Bel-Art - SP Scienceware

    …the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special blend of autoclavable polypropylene is heavier than water so rack remains stable at the bottom of water baths or ice baths All racks have a…

  • No-Wire™ Micro Tube Racks

    Bel-Art - SP Scienceware

    …x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x 9 1226C37: holds tubes: 1.5 mL micro, places: 42, rows: 6 x 7

  • …endplates for labeling and easy sample identification Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit 30mm racks Seven color options to keep samples and benchtop organized Half-size racks fit easily in ice and water baths

  • Floating Microtube Racks

    United Scientific Supplies

    Floating microtube racks are ideal for thawing, cooling, or incubating samples in water or ice baths at a wide range of temperatures from -70C to 100C.  Tubes are supported below the lip while conical ends are immersed in water.  Racks feature a handle for easy removal from water bath as…

  • Magic Touch™ Round Floating Tube Racks

    Bel-Art - SP Scienceware

    …allows racks to rest firmly and steadily in the bucket Expanded Polymer Foam is chemical-resistant, impervious to moisture and odors, and unbreakable under normal use conditions Fits Magic Touch™ Ice Buckets 44 places (1.5 ml tube racks) or 30 places (15 ml tube racks) 8 1/4"…

  • Biotube System

    Simport

    Microtiter format rack and tube system Resistant to most research chemicals Autoclavable up to 100 times Can be stored in temperatures as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are…

  • ChillBlock™ thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and it will…

  • IsoTherm-System®

    Eppendorf

    The IsoTherm-System, which consists of an IsoRack (work rack), IsoSafe (insulating box), and two IsoPacks (cool packs), specializes in cooling samples effectively and consistently at –21°C or 0°C over many hours. The IsoTherm-System can be used to prevent enzymes from becoming inactive…

  • …degrading sample quality Safer – Keeps sample frozen to ensure integrity and ensures freezers stay ice-free Faster – the de-icing process takes 10-15 seconds Flexible – handles any SBS format rack Reliable – de-ices sample consistently across an entire sample rack

  • …microcentrifuge tubes in numbered locations Raised handle for easy lifting without agitating samples Stable feet keep racks upright on the bench Use in water baths, ice or on the benchtop 95mm outer diameter fits most 1000ml beakers Optional vortexing attachment allows samples to be…

  • Molded-in buoys give exceptional stability in a water bath. Can be placed in an ice bath. The hinged lid container can be used as a mini-ice bath. Capacity: 24 x 1.5/2.0 mL and 15 x 0.5 mL tubes. Rack comes with lid.

  • ChillBlock™ thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and it will…

  • Convenient alternatives to ice buckets, incubators, water baths and freezers Potential sources for cross contamination and numerous trips to large storage equipment are eliminated “Press-to-set” microprocessor temperature control (except 5152M45) is simple and reliable Dimensions: 9 3/4" D…

  • Standard Freezer Racks

    Heathrow Scientific

    Offering a variety of racks to safely store samples in your freezer Top inset tray secures tubes in place. Fill lower section with water or crushed ice to chill sample tubes quickly. . Molded polystyrene racks stack neatly to save benchtop space.

  • …aluminum, stainless steel, powder coated metal, painted metal, iron and more. They can be applied on the top and sides of freezer racks to easily identify racks and their content without pulling them out from Dewars. Our MetaliTAG™ are available in multiple dimensions and colors, and…

  • …microcentrifuge tubes in numbered locations Raised handle for easy lifting without agitating samples Stable feet keep racks upright on the bench Use in water baths, ice or on the benchtop 95mm outer diameter fits most 1000ml beakers Also available without vortexing attachment and in 3 other…

  • Rack Microtube Square PP 1.5 ml

    Thermo Scientific Nalgene

    …the rack below the lip. Square or round racks have molded-in letters and numbers at each hole for easy sample identification. Square- and round-style racks for incubating 0.5 to 2.0mL microcentrifuge tubes at elevated or reduced temperatures in water or ice baths Round-style racks fit…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.