Hydrophilic Polypropylene

Compare Tool

Select up to 3 products

Hydrophilic Polypropylene
1 - 32 of 49
Sort
View
Show
  • Hydrophilic PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    …HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and maximum throughput Low hold-up volume The PTFE membrane and polypropylene (PP) construction makes it suitable even for filtration of…

  • Polypropylene Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Hydrophilic Polypropylene membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low…

  • Polypropylene Membrane Target Syringe Filters

    National Scientific

    …available filtration area, and reduces back pressure when filtering samples high in particulates. Membrane: Hydrophilic Polypropylene Housing: medical grade, virgin polypropylene Connections: enhanced female Luer-Lok inlet, male slip outlet Max. operating temperature: 110°C …

  • Polypropylene Membrane Syringe Filters with Microglassfiber Prefilters

    mdi Membrane Technologies

    mdi Hydrophilic Polypropylene membrane Syringe filters type SYGP incorporate a hydrophilic polypropylene membrane with a multilayered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of unique…

  • Magna Polypropylene Membrane Filters

    GVS Filter Technology

    …compatibility Hydrophilic Low protein binding Recommended for: aqueous and organic solvent filtration; HPLC sample preparating requiring low detection levels; ion chromatography; total digest for heavy metals pH range: 1-14 Composed of pure polypropylene with absolute pore…

  • Whatman Polycap AS

    GE Healthcare

    …(0.2, 0.45, and 1.0 µm) life and higher filtration efficiency. Nylon membrane filter layer is inherently hydrophilic, has low extractables, is biosafe, and has excellent flow rates Polypropylene housing is thermally fused (no glues, adhesives, or extraneous materials), reducing extractable levels …

  • Acrodisc® Syringe Filters

    Pall Life Sciences

    …syringe filters offer a choice of filter media: hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in…

  • Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm

    PerkinElmer

    …solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are color-coded and available in smooth rim or gear rim formats.All our syringe filters are HPLC certified. Housing Material: Polypropylene Effective Filtration Area (cm2): 1.09 Pore Size (µm): 0.22 µm…

  • Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 25 mm

    PerkinElmer

    …and are especially ideal for HPLC sample preparation. The pure polypropylene housings are color-coded and available in smooth rim or gear rim formats. All our syringe filters are HPLC certified. Housing Material: Polypropylene Effective Filtration Area (cm2): 4. 08 Pore Size (µm): 0. 22…

  • Aqueous IFD And Solvent IFD In-Line Filters/Degassers

    GE Healthcare

    …component. The Aqueous IFD has a 0.2 µm hydrophilic nylon membrane for use with aqueous-based mobile phases. Solvent IFD has a 0.2 µm high-flow polypropylene membrane for mobile phases containing organic solvents. Both devices have a polypropylene housing, the circumference of which is sealed…

  • Red PTFE (Hydrophilic) Syringe Filters, 0.45 µm, 13 mm

    PerkinElmer

    All our syringe filters are HPLC certified. Housing Material: Polypropylene Effective Filtration Area (cm2): 1.09 Pore Size (µm): 0.45 µm Holdup Volume (µl): <25 Sample Volume (mL): <10 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Temperature:…

  • Whatman Aqueous In-Line Filter/Degasser (IFD)

    GE Healthcare

    …containing at least 20% of the aqueous component. It has a 0.2 µm hydrophilic nylon membrane to support aqueous-based HPLC mobile phase preparation. In-line filter construction and function Whatman Aqueous IFD have a polypropylene housing sealed by a security ring, fittings to accommodate…

  • Polycap As Nylon Membrane Capsule Filters

    GE Healthcare

    For use with large volume aqueous samples Sterile Hydrophilic Biosafe Low extractable Air evacuation vent Devices contain a nylon membrane, yielding excellent flow rates and containing very low extractables. Some capsules have glass microfiber (GMF) prefilters, which…

  • Red PTFE (Hydrophilic) Syringe Filters, 0.45 µm, 25 mm

    PerkinElmer

    All our syringe filters are HPLC certified. Housing Material: Polypropylene Effective Filtration Area (cm2): 4.08 Pore Size (µm): 0.45 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating…

  • Polycap™ TC Polyethersulfone Capsule Filters

    GE Healthcare

    For filtration of critical biological and tissue culture solutions Inherently hydrophilic Low extractables Low protein binding Biosafe Sterile Capsule contains two layers of polyethersulfone (PES) membrane. The device is supplied pre-sterilized and has a vent to evacuate any air to allow…

  • Syringe Filters and 50mm Units, Non-Sterile - MCE, CA, NY, PTFE, PVDF

    Advantec MFS

    …can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Polypropylene can be autoclaved, acrylic can not. For pre-sterilized units see our sterile listing. Dismic models have female luer-lock inlet and male luer…

  • Whatman Anodisc Circle with Support Ring

    GE Healthcare

    …transparent, which means that retained particles do not need to be transferred to another surface before microscopic examination. The membrane is hydrophilic and is compatible with most solvents and aqueous material. No monomers, plasticizers, adhesives, surfactants or wetting agents are used in…

  • Target HPLC Syringe Filters

    National Scientific

    …filtration. Nylon binds protein and is not recommended when high protein recovery is needed. Available with glass prefilter. Polypropylene (PP) is a hydrophilic material that exhibits a wide range of chemical compatibility to organic solvents. A good choice for HPLC sample filtration when…

  • Resprep SPE Cartridges (Normal Phase)

    Restek

    Hydrophilic (polar) adsorbents used to extract hydrophilic analytes from nonpolar matrices, such as organic solvents (e.g., polar contaminants from sample extracts). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. …

  • Whatman Puradisc Syringe Filters – Glass Microfiber

    GE Healthcare

    …following membrane materials: regenerated cellulose (RC), cellulose nitrate, nylon, polytetrafluoroethylene (PTFE), polyethersulfone (PES), polypropylene, polyvinylidene difluoride (PVDF), and cellulose acetate. GE’s Whatman Puradisc line is a comprehensive syringe filter portfolio used in a…

  • Whatman Puradisc Syringe Filters – PES

    GE Healthcare

    …following membrane materials: regenerated cellulose (RC), cellulose nitrate, nylon, polytetrafluoroethylene (PTFE), polyethersulfone (PES), polypropylene, polyvinylidene difluoride (PVDF), and cellulose acetate. GE’s Whatman Puradisc line is a comprehensive syringe filter portfolio used in a…

  • Whatman Polycap TC

    GE Healthcare

    …layer polyethersulfone (PES) membranes and provide efficient filtration for aqueous solutions. 100% integrity-tested during manufacturing Polypropylene housing thermally fused to eliminate surfactants and mold releasing agents that could affect analysis Manufactured according to ISO9001:2008…

  • BioClean MEA™ Sterile Looped Facemask

    Ansell

    …ensures protection, combined with comfort and exceptional breathability. Materials INNER FACING LAYER: Non-woven polypropylene/polyethylene (hydrophilic) FILTER LAYER: Meltblown polyester OUTER FACING LAYER: Non-woven spunbonded polyester (hydrophobic) FASTENINGS: Non-latex polyurethane…

  • Nonsterile Nylon Syringe Filters

    Thomas®

    …Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for filtration…

  • EZFlow® High Particulate Syringe Filters

    Foxx Life Sciences

    …membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in 0.2µm or 0.45µm pore sizes. The filter membrane is reinforced with a polypropylene housing with a female Luer-Lok inlet and a male Luer Slip outlet. All material comply…

  • Whatman Puradisc Syringe Filters – Nylon

    GE Healthcare

    …following membrane materials: regenerated cellulose (RC), cellulose nitrate, nylon, polytetrafluoroethylene (PTFE), polyethersulfone (PES), polypropylene, polyvinylidene difluoride (PVDF), and cellulose acetate. GE’s Whatman Puradisc line is a comprehensive syringe filter portfolio used in a…

  • Millex-HP 0.45 µm, PES 33 mm, non-sterile

    MilliporeSigma

    This 33 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration, has a 0.45 µm pore size used in preparation of aqueous solutions prior to chromatography or other instrument analyses. Connections, Inlet/Outlet: Female Luer-Lok/Male Luer…

  • Glass Fiber Filter Microplates

    Agilent Technologies

    We offer filtration microplates in a range of filtration media, including glass fiber, polyethylene, polypropylene, nylon, polyethersulphone (PES) and polyvinylidene fluoride (PVDF). Four well configurations (140µl to 15ml/well) are available. The microplates are suitable for vacuum/positive…

  • EZFlow® Sample Prep Syringe Filters

    Foxx Life Sciences

    …solutions, alcoholic solutions and non-aqueous HPLC/GC solvents Hydrophobic PTFE - filtration of organic solvents? Hydrophilic PTFE - filtration of aqueous and mild organic solutions Hydrophilic PVDF - filtration of aqueous and mild organic solutions: high flow rate, low protein binding

  • Whatman Puradisc Syringe Filters – Cellulose Acetate

    GE Healthcare

    …following membrane materials: regenerated cellulose (RC), cellulose nitrate, nylon, polytetrafluoroethylene (PTFE), polyethersulfone (PES), polypropylene, polyvinylidene difluoride (PVDF), and cellulose acetate. GE’s Whatman Puradisc line is a comprehensive syringe filter portfolio used in a…

  • AcroPak™ Membrane Filter Capsules

    Pall Life Sciences

    AcroPak Membrane Filter Capsules have hydrophilic Supor® (polyethersulfone) membrane for low protein binding. 1/4-1/2” stepped hose barb inlet/outlet connections. Polypropylene housing with polycarbonate filling bell. Gamma sterilized. Endotoxin-free and USP Class VI-121°C. Ideal for…

  • BRAND 96-well Plates

    BrandTech®

    BRAND polystyrene and polypropylene microtitration plates are excellent for cell and tissue culture, sample storage, immunological assays, and other applications. Plates have 96 wells and are available with 330µL or 400µL well volumes. They are fully compatible with most standard plate readers…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.