Hydrocarbon Trap

New Hydrocarbon Trap - great for LCMS nitrogen units and GC units with 1.5 times the capacity of our current N9301192 High Capacity Hydrocarbon Trap - N9301192 Contains 750cc of preconditioned activated charcoal. Stainless Steel bdy. 1/4" brass compression fittings with ferrules for…

Remove organics from carrier gases, air and hydrogen High capacity 200 cc of filtering media Impregnated carbon filter media Refill includes media for two recharges of HT200 Series Hydrocarbon Trap

Removes trace impurities from carrier gas Reduces organics to 0.1 ppm (assuming 100 ppm input) 60 µm frit prevents gas contamination by purifier particles Good for purge-and-trap systems Refillable and rechargeable Maximum operating pressure: 125 psig (862 kPa) Maximum flow:…

Packed with an extremely high surface area, baked coconut shell–based activated carbon Purged with ultra-high-purity helium; ready to use with any carrier gas including hydrogen Reduces organics to 0.1 ppm (assuming 100 ppm input) Maximum operating pressure: 250 psi (1,724 kPa)

Capacity: 80 grams of medium to heavy molecular weight hydrocarbons Pressure: Up to 250 psig Efficiency: reduction of C4 hydrocarbons to less than 15 ppb 750 cubic centimeter gas purifiers Ideal for bulk purification applications or where several instruments are plumbed from a…

Extremely high surface area, coconut shell-based, activated carbon 100 cc of filtering media Purged with ultra-high purity helium Refillable

Removes hydrocarbons and other contaminants Reduces organics to 0.1 ppm (assuming 100 ppm input) Each individually activated to ensure maximum efficiency Fits in GC oven for easy thermal recharging Maximum operating pressure: 60 psi (414 kPa)

Click-On Traps measure: 8 1/2" x 1 1/4" (21.6 x 3.2cm) Note: Replacement trap only—fittings sold separately.

Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process.

Adsorbent refiles for hydrocarbon/moisture traps allow continued removal of extremely low levels of both moisture and hydrocarbons. Refill supplies material for two recharges for HMT trap.

Finish: Crimp Top Cap with Septa

I. D. : 11 mm

Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need…

Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in. There is no need for…

The glass indicating trap clearly shows when the filter needs to be replaced with the use of color changes. The packing material is a silica-based environmentally friendly substitute for cobalt dioxide (blue) in the moisture indicator. Available as a kit with the necessary 1/8" brass connectors, and…

Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need…

Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need…

Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in. There is no need for…

All traps measure: 10 5/8" x 1 3/4" (27 x 4.4 cm)

…gas also should be contaminant-free, or baseline fluctuations and excessive detector noise can occur; detector gases should be free of water and hydrocarbons, or excessive baseline noise can result. Gas purifiers remove these contaminants from gas sources, thereby improving system performance.

…supply or system operation. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process.

…pure gas (maximum flow of 8 L/min). Triple gas trap is ideal for purifying carrier gas. Helium-specific triple gas trap is made for GC-MS—ready to use within 15 minutes of installation. Hydrocarbon trap removes hydrocarbon contamination from carrier gas to help eliminate ghost…

Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process.

This trap contains oxygen, moisture and hydrocarbons adsorbents in one trap and is packed and purged under helium. The glass indicating trap clearly shows when the filter needs to be replaced with the use of color changes. The packing material is a silica-based environmentally friendly substitute…

Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in. There is no need for…

The glass indicating trap clearly shows when the filter needs to be replaced with the use of color changes. The packing material is a silica-based environmentally friendly substitute for cobalt dioxide (blue) in the moisture indicator. Available as a kit with the necessary 1/8" brass connectors, and…

Big Universal Traps utilize a layered, multi-adsorbent bed packing of the most effective, highest capacity adsorbent materials available today for the removal of oxygen, moisture, hydrocarbons, carbon dioxide and carbon monoxide from helium gas streams. The volume of the various adsorbent materials…

Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process.

…Indicating Moisture Traps are designed to remove water, oil, and organics from gases employed in, but not limited to, gas chromatography. Refillable moisture traps are constructed from Lexan brand polycarbonate tubing. Lightweight, chemically resistant and of superior strength when compared to traps…

Designed for easy, hassle-free cartridge changes Up to 20 L of hydrocarbon-free nitrogen per minute Filters connected in parallel to handle high flows for LC-MS

Easy to install Attach to same fittings as original manufacturer's equipment Built-in frits in cat.#s 22820, 21610, 23031, and 23032 retain fine particles; adsorbents remove both moisture and hydrocarbons.

Ultra Clean Filter Bundle of 3 for GC. Includes (1) Oxygen/Moisture/Hydrocarbon Trap and (2) Hydrocarbon/ Moisture Traps.