Hplc Tubing

Compare Tool

Select up to 3 products

Hplc Tubing
1 - 32 of 113
Sort
View
Show
  • Capillary Stainless Steel Tubing Assemblies for Agilent HPLC Systems

    Restek

    Precut, micropolished tubing and preseated fittings for quick, easy maintenance of your Agilent HPLC systems Meet or exceed manufacturer's performance.

  • PTFE Tubing

    Restek

    Ideal for mobile phase inlet lines Chemically inert Use to 500 psi (3,447 kPa) and 80°C

  • Whatman Aqueous In-Line Filter/Degasser (IFD)

    GE Healthcare

    …hydrophilic nylon membrane to support aqueous-based HPLC mobile phase preparation. In-line filter construction and function Whatman Aqueous IFD have a polypropylene housing sealed by a security ring, fittings to accommodate 1/16”-1/8” tubing, and an air vent on the inlet with luer lock cap to…

  • LC Stainless Steel Capillary Tubing

    Restek

    …to replace system tubing as part of your troubleshooting or want to reduce the dwell volume of your system as you move to narrower columns, Restek has the quality tubing in the lengths and IDs you need. Each ID is color coded, so it is easy to identify and replace correctly. Tubing is precision cut,…

  • Stainless Steel Tubing

    SGE

    Smooth and clean bore. Supplied in coils and enclosed in a stainless steel spiral mount. Where tubing OD is smaller than 1/16", ends are bushed to 1/16" and GC ferrules are supplied.

  • Universal Connection Capillaries

    Agilent Technologies

    Made of flexible stainless steel (0.6 mm OD) with 1/16” OD tubing at both ends to accept standard fittings Pre-swaged fittings are assembled according to Swagelok specifications

  • Inert PEEK Tubing

    Restek

    Replaces stainless steel, titanium, PTFE, or Tefzel tubing Less oxygen permeable and more temperature resistant (to 100 °C) than PTFE or Tefzel tubing Use with PEEK finger-tight or flangeless fittings Use tubing ≤ 0.007" to 7,000 psi; tubing ≥ 0.010" ID to 5,000 psi

  • PEEKsil Tubing

    SGE

    …with conventional metal or polymer ferrule systems. PEEKsil may be used as a direct replacement for conventional stainless steel as well as a replacement for PEEK tubing used in liquid chromatography systems. The 0.36 mm OD material can be used directly in place of 0.36 mm OD fused silica tubing.

  • Fittings and Ferrules for 1/8" Tubing

    Restek

  • HPLC Tubing

    Agilent Technologies

  • Connecting Tube for Agilent HPLC Systems

    Restek

  • PEEK Tubing

    MilliporeSigma

    tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical compounds. PEEK tubing also…

  • PEEK Tubing

    Agilent Technologies

    Flexible and easy to cut to desired lengths Color-coded for easy tracking Accepts both stainless and PEEK fittings 1/16" OD

  • HPLC Mobile Phase Cap And Reservoir Systems

    DWK Life Sciences (Kimble)

    …fittings. Supplied flangeless fittings (1/4-28) and adapters allow easy connections to any HPLC pump system. Systems include a three hole cap, conical bottom reservoir, standard fittings kit and PTFE tubing. NOTE: Not recommended for use with tetrahydrofuran (THF) or other aggressive organic…

  • Low-Pressure Slip-On Inlet Filter for Mobile Phase Reservoir

    Restek

    …The slip-on filter easily attaches to the pump inlet line, without the use of wrenches. The universal 1/8" OD tip accommodates standard PTFE tubing inner diameters. The cylindrical filter is standard 10 µm porosity. Fits Altex, ISCO, LDC, Varian, Waters, PerkinElmer, and other pumps.

  • HPLC Poly Manifold for Quick-Disconnect Safety Disposal Cans

    Justrite

    The HPLC Poly Manifold enables up to six waste lines (per manifold) from HPLC processes to be fed into a single intake fitting. Manifolds have six 1/4-28 ports and one 3/8" NPT port (all come with caps for unused ports) and either one quick disconnect in No. 316 stainless steel or…

  • Aqueous IFD And Solvent IFD In-Line Filters/Degassers

    GE Healthcare

    …filter/degassers (IFD) connect directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Aqueous IFD provides pure filtration of aqueous based HPLC mobile phases while the Solvent IFD is used with organically based HPLC mobile phases. Specifically, the…

  • Whatman Puradisc Syringe Filters – PVDF

    GE Healthcare

    …larger volumes of harder-to-filter samples. Polyvinylidene difluoride (PVDF) membranes PVDF membranes are designed for high tensile strength, high solvent resistance, and low protein binding, making them suitable for biomedical filtration, sterilization filtration, and HPLC sample preparation.

  • HPLC Can Spill Basin

    Justrite

    The durable, polyethylene Spill Basin keeps work areas clean around the HPLC cans, and captures any leakage from HPLC inflow tubes. The basin provides additional protection from accidental “bumping” when cans are stored on the floor. Sized to accept Justrite’s two and five-gallon…

  • HPLC Column Tubing

    Restek

    Restek tubing is manufactured from fine, chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned, and passivated. We polish the tubing and promise a burr-free cut. You can use this tubing immediately—there is no need for additional treatment.

  • Whatman ReZist In-Line Vent Filter

    GE Healthcare

    …(bubble point or water breakthrough pressure in situ methods) Lightweight: avoids the collapsing of tubing that can be caused by heavy filter devices Appropriate for in-line HPLC sample preparation Integral hydrophobic PTFE venting membrane is resistant to harsh solventsCan be autoclaved…

  • Whatman Solvent IFD In-Line Filter/Degasser (IFD)

    GE Healthcare

    GE’s Solvent IFD is a high-flow HPLC in-line filter/degasser, designed to simultaneously filter and degas organically based HPLC mobile phases. Faster than traditional mobile phase preparation Chemically resistant polypropylene membrane and housing, built to filter solvent mobile phases without…

  • Tubing Clip

    Restek

    Securely holds 1/16" or 1/8" tubing in beaker, flask, or bottle up to 4 mm thick.

  • Puradisc™ 13 Syringe Filters

    GE Healthcare

    Serve in HPLC and biological sample preparation Volume to 10 mL Filtration area of 1.3 cm 2 Autoclavable Puradisc syringe filters are designed for quick and efficient filtration of samples. Syringe filters are produced from pigment-free polypropylene and have standard inlet and outlet luer…

  • PEEK Tubing

    PerkinElmer

  • PEEK Tubing Elbows

    Restek

    Tubing elbows (90° and 180°) are ideal for routing 1/16" PEEK tubing through your system. Simply snap the tubing into the elbow. Prevent pinching of PEEK tubing, which can cause high pressure.

  • Clean-Cut Tubing Cutter

    Restek

    Burr-free, perpendicular cuts that will not distort the tubing OD or close the ID Use on PEEK, PTFE, Tefzel, and other polymeric tubing

  • Rigid Capillary Tubing

    Agilent Technologies

    Squarely cut, pre-cleaned and ready to use Use with stainless steel fittings and ferrules or PEEK fittings

  • PEEKsil Capillary Tubing

    Thermo Scientific

  • 10-32 CPI SS Gland Nut for 1/16 inch Tubing

    PerkinElmer

    10-32 CPI SS Gland Nut for 1/16 inch Tubing

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.