Hplc Reservoir

Side neck allows addition of filtered solvent without removing delivery cap.

Protect Expensive HPLC Solvent Reservoirs. Safeguard expensive HPLC solvent reservoirs against damage or breakage while in use or during storage with these durable polyethylene Scienceware® HPLC Reservoir Secondary Containers. These containers are resistant to most chemicals and are available in…

HPLC Solvent Reservoir Accessory, Safety Air Inlet Valve, w/ 0.2µm PTFE DLL Vent Filter. The Air Inlet Valve and PTFE Filter block out all harmful solvent vapors while blocking any incoming contaminants from the incoming air. This valve threads directly into any of Foxx Life Sciences HPLC…

Designed for preparation, storage and delivery of all liquid chromatography mobile phases.  As part of our ULTRA-WARE® series, these reservoirs are recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents. Available with or without graduations

…air. This valve threads directly into any of Foxx Life Sciences HPLC Reservoir Manifolds. The sealed VersaCap® design eliminates tube twisting and eliminates tubes from sliding in and out of the container. With HPLC Reservoir Assemblies it is guaranteed to get accurate data from your analysis…

…air. This valve threads directly into any of Foxx Life Sciences HPLC Reservoir Manifolds. The sealed VersaCap® design eliminates tube twisting and eliminates tubes from sliding in and out of the container. With HPLC Reservoir Assemblies it is guaranteed to get accurate data from your analysis…

Designed for preparation, storage and delivery of all liquid chromatography mobile phases.  As part of our ULTRA-WARE® series, these reservoirs are recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents. Plastic safety-coating blocks UV light…

…the cap use 1/4-28 fittings. Supplied flangeless fittings (1/4-28) and adapters allow easy connections to any HPLC pump system. Systems include a three hole cap, conical bottom reservoir, standard fittings kit and PTFE tubing. NOTE: Not recommended for use with tetrahydrofuran (THF) or other…

…bottom reservoir is manufactured from Type I, Class A borosilicate glass with a plastic safety coating. This coating also blocks all UV light up to 385 nm, preventing photodegredation of light sensitive mobile phases. Systems include the following: economy three hole cap; flat bottom reservoir; All…

The PerkinElmer 10 um solvent reservoir sparger is made from stainless steel material and helps the user to connect the sparger to the solvent delivery line. It can also be removed easily for cleaning and maintenance purposes.

Agilent provides a variety of tubing kits with selected tubing materials and dimensions for different LC instruments, including fraction collectors, vacuum degassers, and RI detectors. Application: Recommended For Ms Applications This product is only available to U.S. Domestic Customers. …

Agilent provides a variety of tubing kits with selected tubing materials and dimensions for different LC instruments, including fraction collectors, vacuum degassers, and RI detectors. Application: Recommended For Ms Applications. For Agilent 1290 Infinity Binary Pump (G4220A) & Quarternary Pump…

The Agilent Technologies solvent reservoir cabinet with LC technique is ideal for analytical applications. It is suitable for Infinity II LC instruments. Application: For Infinity II LC Instruments This product is only available to U.S. Domestic Customers. For research use only, not to be…

The Agilent Technologies solvent reservoir tubing measuring 3.1 mm ID x 4.7 mm OD x 300 mm L is designed to use with fittings for a secure connection of the pump head to any preparative pumps. PTFE construction provides more durability and withstands rigorous use and impacts. Application: For…

Retention Mechanisms: Lipid matrix is retained via normal phase, hydrophobic, and Lewis acid-Lewis base interactions Sample Matrix Compatibility: Oils Dual layer SPE that contains both LC-Florisil® (upper layer) and Z-Sep/C18 (lower layer) SPE sorbents, separated by a PE frit …

The Agilent Technologies solvent reservoir inlet tubing FEP measuring 0.7 mm ID x 1.6 mm OD has LC technique. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies solvent reservoir in-line filter assembly is used for separating solvents from the solvent bottle and the stainless steel construction offers durability. Application: For Agilent 1290 Infinity Quaternary Pump This product is only available to U.S. Domestic Customers. …

Push-fit onto a 1/8" OD tube for a quick connection These reservoir filters and bubbler provide simple and effective solvent filtration. A 10 µm filter ensures even the smallest particulates are removed from the solvent supply line. Bottom-of-bottle filters have slots in the body…

A 316 stainless steel tip with a Tefzel collar seals to a corrosion-resistant 316 stainless steel filter element. The slip-on filter easily attaches to the pump inlet line, without the use of wrenches. The universal 1/8" OD tip accommodates standard PTFE tubing inner diameters. The cylindrical…

A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to 1/8" OD PTFE tubing when finger-tightened onto the precision-machined filter holder. The filter element is replaceable. Standard 10 µm porosity protects delicate pump components from particles but introduces very little…

…after degassing Mix and match cap designs and reservoirs to fit your specific application Complete use of all solvents in reservoir Allows the mixing and matching of caps and reservoirs Reduces operating costs Chromaphase Reservoirs A self-contained system for safer and more efficient…

Available in 10 or 20 µm.

…threads directly into any of Foxx Life Sciences HPLC Reservoir Manifolds. The sealed VersaCap design that Foxx offers eliminates tubes twisting as you thread the cap and eliminates the tubes from sliding in and out of the container. These HPLC Reservoir Assemblies guarantee you get accurate data…

…fittings for PTFE 1/8" O.D. tubing.The unique PEEK bottom of the bottle inlet filter is designed to withdraw 99% of the HPLC mobile phase liquid out of the reservoir bottle without tilting to bottle, preventing a safety hazard. The bottom of the bottle inlet filter has a 2um filter which…

Foxx Life Sciences PUREGRIP® HPLC Solvent Reservoir Caps and Bottle system offer the safest and most ergonomic lab safety solution in the industry. This system come with VersaCap®, a Class VI PTFE Manifold, chemically resistant Viton O-Ring & Air Inlet Valve combined with a Foxx 25mm,…

Foxx Life Sciences PUREGRIP® HPLC Solvent Reservoir Caps and Bottle system offer the safest and most ergonomic lab safety solution in the industry. This system come with VersaCap®, a Class VI PTFE Manifold, chemically resistant Viton O-Ring & an Air Inlet Valve combined with a Foxx 25mm,…

This all-purpose stir bar permits stirring in closed containers without contamination. Ideal for use with conical bottom HPLC reservoirs. PTFE-covered X-shaped magnetic stirring bar More turbulence with less vibration than straight stir bars Autoclavable

An inexpensive bottle cap for either GL-45 or GPI-38 threads that permits standard solvent or media bottles to be used as an HPLC reservoir. Caps have two holes to accomodate 1/8" tubing and one hole that accepts a standard luer inner joint. Caps are made from polypropylene and the inserts are…

Solvent reservoir for use in HPLC mobile phase delivery. The 1000 mL size HPLC solvent bottles are a replacement for use with the Hewlett-Packard model HP-1090 HPLC (HP part number 9301-0656). Outer joint at the top on all sizes is polished, thereby making an excellent seal between the PTFE cap and…