Hplc Fittings

Compare Tool

Select up to 3 products

Hplc Fittings
1 - 32 of 636
Sort
View
Show
  • Fitting and Unions

    Agilent Technologies

    To ensure leak-free connections, use the manufacturer’s recommended style fittings with columns, valves and unions. Peak shape and resolution may be lost by mixing fittings.

  • Shut-Off Valves with Fittings

    IDEX Health & Science

    Quickly stop a flow stream Withstands pressures up to 500 psi!

  • …1/4" compression end-fittings are compatible with 1/16" connecting tubing using Valco and Parker fittings. Fittings with distribution cone are intended for use on 3.0–4.6 mm ID HPLC columns Fittings with flat bottom are intended for use on 1.0–3.0 mm ID HPLC columns

  • LC Fittings and Unions

    Agilent Technologies

    Different columns have different fitting requirements. (Zorbax columns use standard Swagelok fittings) Agilent 1100 modules use standard Swagelok fittings Rheodyne injection valves require Rheodyne fittings How do you choose the correct fittings? To ensure leak-free connections, and to prevent…

  • …such as glass, PEEK, and stainless steel. Use the interchangeable components to create chemically inert fluid pathway connections and flat-bottom ports (using Gripper fittings). Fittings are autoclavable (remove caps first). Order colored caps quickly and easily color code multiple fluid lines.

  • …unique double ended ferrule design seals at two points to prevent leaks. The fittings are compatible with any standard female HPLC fitting, including Swagelok®, Parker™, Waters®, Valco® and Whatman®. EasyLOK fittings are recommended for use with SGE GLT™ columns.

  • A good connection between HPLC components is necessary for trouble-free chromatography. Secure-Fit connectors from Restek and Selerity Technologies ensure a consistent, leak-free seal—and they eliminate excess dead volume! An internal spring mechanism holds the capillary tubing at the proper…

  • Storage for ten HPLC columns (minimum 100 mm in length), compartments for accessories, and a book holder* Small footprint—easily fits next to HPLC instruments *Please note: Accessories and supplies in photograph are not included.

  • The 700 series syringe is the original hand-fitted Hamilton syringe. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance less than three thousandths of a millimeter, resulting in unsurpassed syringe life. This series of syringes is ideal for dispensing volumes from…

  • Choose from a wide range of accessories for flash chromatography dry loading, filtration, and large volume processing. Provide a secure seal for both the inlet and outlet of TELOS flash columns with the luer cap and plug. TELOS column luer cap can be used in conjunction with the appropriate…

  • fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings

  • PEEK Tubing

    Agilent Technologies

    Flexible and easy to cut to desired lengths Color-coded for easy tracking Accepts both stainless and PEEK fittings 1/16" OD

  • Ideal for quickly and reliably connecting PEEK tubing in HPLC systems One-piece, finger-tight fittings—no ferrules required Low dead volume Included end fittings and body made of biocompatible PEEK Available in 0.25, 0.50, and 0.75 mm bore sizes Maximum temperature: 100°C …

  • …The CG-1166-08 cap assembly fits GL45 threaded bottles and has a PTFE bulkhead with three 1/4"- 28 threaded ports to accommodate fittings for PTFE 1/8" O.D. tubing.The unique PEEK bottom of the bottle inlet filter is designed to withdraw 99% of the HPLC mobile phase liquid out of the…

  • ZDV union, PEEK, with Fittings

    Agilent Technologies

  • Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal Both hand-tight and hex-head styles wrench-tighten for reliable UHPLC use up to 20,000+ psi! Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid design…

  • Select the size you need for a leaktight seal Select PTFE cones when chemical resistance is important. The OD of the tubing should be matched to the inside diameter of the cone.

  • …such as glass, PEEK, and stainless steel. Use the interchangeable components to create chemically inert fluid pathway connections and flat-bottom ports (using Gripper fittings). Fittings are autoclavable (remove caps first). Order colored caps quickly and easily color code multiple fluid lines.

  • EZwaste® Replacement Fittings

    Foxx Life Sciences

    …MNPT fitting, Straight Filter Fitting Pack is the replacement fittings for EZwaste® Solvent Waste System's fittings. It includes (10) 1/4" MNPT fitting, Straight Filter Fitting. 1170A83 The 1/4" MNPT fitting, Straight Filter Fitting Pack is the replacement fittings for…

  • Universal Connection Capillaries

    Agilent Technologies

    Made of flexible stainless steel (0.6 mm OD) with 1/16” OD tubing at both ends to accept standard fittings Pre-swaged fittings are assembled according to Swagelok specifications

  • fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings

  • HPLC Mobile Phase Cap And Reservoir Systems

    DWK Life Sciences (Kimble)

    …with a TFE/propylene O-ring and a polypropylene screw collar. The connecting threads on the top of the cap use standard 1/4-28 flangeless fittings. Two of the ports have 1/8” through holes and one has a 1/16” through hole. Flat bottom reservoir is manufactured from Type I, Class A borosilicate…

  • …such as glass, PEEK, and stainless steel. Use the interchangeable components to create chemically inert fluid pathway connections and flat-bottom ports (using Gripper fittings). Fittings are autoclavable (remove caps first). Order colored caps quickly and easily color code multiple fluid lines.

  • …in stainless steel and polypropylene with luer fittings for use with a standard syringe. The holders are designed for the quick and easy clarification, sterilization, and removal of particulates from small volume samples, typically for HPLC applications. The holders contain PTFE gaskets and…

  • A good connection between HPLC components is necessary for trouble-free chromatography. Secure-Fit connectors from Restek and Selerity Technologies ensure a consistent, leak-free seal—and they eliminate excess dead volume! An internal spring mechanism holds the capillary tubing at the proper…

  • Drill into the broken fitting, then screw the extractor into the fitting and remove it easily. Eliminates the need for heat or other techniques that could damage your column.

  • Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal Both hand-tight and hex-head styles wrench-tighten for reliable UHPLC use up to 20,000+ psi! Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid design…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.