Hot Plate 12"

Compare Tool

Select up to 3 products

Hot Plate 12"
1 - 30 of 30
  • EchoTherm™ Digital Hot Plate Stirrers

    Torrey Pines Scientific

    …measurement for accuracy to ±1% PID temperature control to 1°C on plate surface Programmable and non-programmable models available UL, CSA, and CE approved EchoTherm™ hot plate stirrers are accurate, full-featured and have an easy-to-use membrane keypad. The…

  • Digital Magnetic Hot Plate Stirrers


    …intuitive control of the hotplate stirrer. Note: Hot plates have been designed and manufactured in compliance with the following standards CE, CSA and UL. Laser-Verified, Affordable Accuracy Plus Exclusive Features Only Found in Higher Priced Plates! High Contrast, Bright White LED …

  • EchoTherm™ Analog Hot Plates

    Torrey Pines Scientific

    …available in solid ceramic glass and cast aluminum Heater plate sizes in 6" (154mm), 8" (204mm) and 12" (304mm) Heater power 400 watts (6"), 600 watts (8") 1200 and 1400 watts (12") Temperature range from 100°C to 450°C Temperature…

  • EchoTherm™ Digital Hot Plates

    Torrey Pines Scientific

    … PID temperature control to 1°C on plate surface Electronic calibration stored on chip, no batteries to replace Display all parameters simultaneously Ceramic or aluminum top UL, CSA, and CE approved EchoTherm™ hot plates have a membrane keypad and LCD screen that…

  • Stuart Stirring Hot Plates

    Stuart (Cole-Parmer)

    Custom designed stirring hot plates provide accurate stirring and temperature control Hot surface warning light flashes when plate temperature is above 50°C Durable front panel resists spills and chemicals Available in various interface, plate surface, and body color…

  • EchoTherm™ Analog Stirrers & Hot Plate Stirrers

    Torrey Pines Scientific

    …8615A04) and ST10 (8614Z01 & 0857A09). Plate size on the HS10 (8615A01 & 8615A04) and ST10 (8614Z01 & 0857A09) is: 8" (20.32 cm) x 8" (20.32 cm) Unit size: HS10 (8615A01 & 8615A04) and ST10 (8614Z01 & 0857A09): 12" (33 cm) deep, 9" (22.9 cm) wide and…

  • Deluxe Digital Hot Plate with Magnetic Stirrer

    United Scientific Supplies

    hot plate with magnetic stirrer features an aluminum housing with a scratch and chemical resistant stainless steel ceramic coated 6" diameter heating plate. Unit is thermally insulated so the housing is relatively cool to the touch during operation. Designed with double PT sensors, this hot

  • CultureTemp™ 37°C Warming Plate

    Bel-Art - SP Scienceware

    …this highly accurate warming plate that keeps cells at an optimal 37°C (±°C ) outside of the incubator. The unit is water resistant and safe for cleaning with Ethanol or IPA. UL approval pending. Keep dishes outside the incubator longer; 37°C plate protects cell viability;…

  • 5/16" X 12" Support Rod (For Use With PC-200, PC-210, PC-220)


    These 5/16 x 12 inch stainless steel support rods screw into the base of Corning® PC-200/210/220 series hot plate/stirrers.

  • Talboys PTFE RTD Probes


    …probe, 12" (30.5cm) flex arm, interchangeable 3-prong clamp head, 2-prong clamp head and spring clamp head. Safety Features: Cool Touch Housing: Housing is made of a heat resistant polymer that is not only cool to the touch but also is chemical resistant. Hot Top Indicator: Hot warning…

  • EchoTherm™ Digital, Electronic Chilling/Heating Dry Baths

    Torrey Pines Scientific

    …testing and more. The small, compact size uses very little bench space. The heating/chilling surface is a 2.875” x 4.375” aluminum plate that is very flat for good contact with the sample. Two-line, alphanumeric, backlit display normally shows target and actual temperatures, but can…

  • Undergrad Hotplates

    Stuart (Cole-Parmer)

    …conjunction with the SCT1 digital temperature controller to accurately control sample temperature rather than plate temperature. The "Hot" warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and unplugged from the mains. …

  • Radleys Starfish Monifolds, Clamps and Support Rods


    …from multiple vessels much simpler, neater and quicker. Simple screw tightening allows manifolds to be located in any position on any standard 12 mm diameter support rod or lab scaffolding. Quick release connectors on inlet/outlets make attaching of tubes quick and easy. Connectors also…

  • Heavy-Duty Stainless Steel Lab-Lifts


    …leverage and easy height adjustments. Lab-lifts are ideal for use in fume hoods or bench tops and hold a variety of items including glassware, hot plates, baths and magnetic stirrers. 17” Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as…

  • Steel Chemical Forceps

    United Scientific Supplies

    Excellent for handling chemicals, and hot objects. Available in stainless steel or nickel plated steel. Edges are blunt and fit squarely together.

  • PIE-BLOCK Reaction Block System


    …sensor Reaction PIE-BLOCK is designed to fit directly on 135mm diameter circular top hot plate stirrers. Versatile design of the safety pie plate holder allows up to four pie wedges on one hot plate and securely locks them together. All wedges are anodized aluminum and color-coded for quick…

  • Sublimation Apparatus, 150mL


    Two-piece grease-free sublimer with a flat bottom to enable heating on a hot plate stirrer. Condenser has a large top opening for use with dry ice / acetone or liquid nitrogen. Connection between the flask and condenser is made with a flat o-ring joint permitting parts to be gently separated for…

  • OptiTherm® Aluminum Reaction/Heating Blocks


    …above. The anodized aluminum flask inserts are color coded for easy identification. Designed to fit directly on 135mm diameter circular top hot plate stirrers. PLEASE NOTE: FLASK INSERTS MUST BE PURCHASED SEPARATELY. ** US Patent Number 7,494,267 See Recovery Flask Inserts, CG-1992-R-series

  • Heat Transfer Block - Microscale

    Ace Glass

    …and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect better heat transfer. Block has three bowl shaped-recesses, one 20mm straight-thru hole, one deep bowl-shaped hole, and one hole for a…

  • Oil Bath Combination Packages


    …part number. Ordering with these packages also saves you a minimum of 10% of the purchase price of the individual components. PLEASE NOTE: HOT PLATE MUST BE PURCHASED SEPARATELY. Package #1 / CG-1100-100 Consists of One Each: CG-1100-01; 100 x 50mm Oil Bath CG-15001-30;…

  • Buffer Puffer Electrophoresis System

    Owl Separation Systems

    …SuperSafe™ Lid with attached power supply leads; EasyCast gasketed UVT gel tray; and two combs (12 and 20 well, 1.5/1.0 mm thick double sided). Gel size: 12 x 14 cm; footprint: 18 x 25 x 12 cm; running buffer volume: 1,000 mL. The larger A5 System includes buffer chamber; SuperSafe Lid…

  • Laboratory Muffle Furnaces, with Lift Doors


    …of reliability. Tmax 1100°C or 1200°C Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 40/12) Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace…

  • Ashing Furnaces


    …air is preheated to ensure a good temperature uniformity. Tmax 1100°C Heating from two sides by ceramic heating plates Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace Highly durable, high-performance…

  • Dynabloc, Heating Blocks for Vials & Tubes

    Ace Glass

    …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • Minitrol Heating Mantle Controller


    …cords, as well as small furnaces, ovens, hot plates, dies and other applications requiring stepless control Can be used on any non-inductive loads to its rated capacity of 1,440 watts Proportions the operating voltage to the load from 5 1/2% to 100% of the time, according to the preset…

  • Easycast Mini Electrophoresis Systems

    Owl Separation Systems

    … UV Transmissable (UVT) gel tray allows user to view bands on a transilluminator without removing the gel from the tray. The tray can withstand hot agarose (as high as 60°C) during casting. A leak-resistant gasket allows for casting in buffer chamber without taping. Two comb positions allow…

  • Superfrost® Plus & Colorfrost® Plus Microscope Slides

    Thermo Scientific

    …distilled water. However, if you begin losing tissue sections, use only distilled.) Mount your tissue sections carefully. Tissue bonding begins quickly on Superfrost Plus slides. Dry slides completely at room temperature by vertically draining them before heating them in an oven or on a hot plate.

  • POWERMITE™ proportional on/off type-1,000W capacity heat control 3A


    …polyurethane feet, pilot lamp, 3-wire receptacle (U.S. plug) on a 12 in. cord, and a 4 ft, 3-wire power cord with U.S. plug. Used to control THERMOWELL heating mantles or other resistive heating circuits (hot plates, heat tapes, water baths, etc.). Available in solid-state or proportional…

  • myBath Series Water Baths


    …and long life The chambers resist rust and have no corners to collect dirt or contamination. The larger 8L and 12L units have drains for hassle-free water changes. The 4L, 8L, and 12L models include a see-through cover that can be removed, or flipped back on a rear hinge to conserve bench space.…

  • MultiTherm™ Shaker Accessories


Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.