Hot Block

Compare Tool

Select up to 3 products

Hot Block
1 - 32 of 58
Sort
View
Show
  • …for durability and easy identification,Round reaction blocks are designed to fit directly on 135mm diameter, round top hot plate stirrers. Aluminum construction offers excellent heat transfer without interfering with magnetic stirring. All blocks are anodized for increased strength, durability and…

  • …Interfering with the Magnetic Field Holes are Spaced for Optimum Stirring of All Vials Holder Fits All 135mm Diameter Hot Plate Stirrers Each Section of the Block is Engraved with the Vial Size for Easy Identification Thermowell is Provided for Insertion of a PT-100 Temperature Sensor

  • …sensor Reaction PIE-BLOCK is designed to fit directly on 135mm diameter circular top hot plate stirrers. Versatile design of the safety pie plate holder allows up to four pie wedges on one hot plate and securely locks them together. All wedges are anodized aluminum and color-coded for…

  • …Heater Block adapter is designed to fit all hot plate stirrers with a 135mm diameter top plate. Lower edge of block covers side of top plate and prevents block from slipping, allowing for safe heating of your Chemglass or Genevac blocks. The innovative PTFE shield on the heating block keeps the…

  • Hot Start Taq DNA Polymerase is a recombinant, thermostable Taq DNA polymerase complexed with a thermolabile, neutralizing antibody that blocks the polymerase activity prior to the initial DNA denaturation step of PCR. When the temperature of the PCR reaction mix reaches 95°C during the initial…

  • SBH130 Analogue 2 Block Heater

    Techne (Cole-Parmer)

    …130°C maximum temperature Hot warning light to warn that the blocks are too hot to touch Uniform and stable temperatures Robust construction with simple analogue setting of temperature. The 'Hot' warning light will flash whenever the block temperature is above 50°C and…

  • Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect better heat transfer. Block has three bowl shaped-recesses, one 20mm straight-thru hole, one deep bowl-shaped hole, and one hole for a thermometer. 9594-08 auxiliary heat block for use…

  • Traditional Digital Dry Baths

    labForce® (a Thomas Scientific Brand)

    …tubes and plates. All dry baths offer a built-in user recalibration function, to guarantee long term temperature accuracy. Each dry bath includes an easy to use block lifter, with a temperature insulated handle for quick, convenient exchange of blocks, even while they’re still hot.

  • 3G HotStart Taq DNA Polymerase (5u/ul): HotStart DNA Polymerase contains a proprietary antibody that blocks polymerase activity at low temperatures. During the initial denaturation step at 94°C, the antibody dissociates from DNA polymerase and restores enzyme activity. This feature…

  • … Buffer optimized for fast cycling and reproducibility Engineered for controlled polymerase activity, Accuris Hot Start Taq is bound with a monoclonal antibody that blocks enzyme activity. This allows reactions to be set up at room temperature without the risk of non-specific amplification.…

  • Instatherm Blocks

    Ace Glass

    …9601-16, Instatherm oil bath. Combine the rapid and precise temperature control of Instatherm with the safety of aluminum heating blocks. You may stir using a hot plate stirrer, however do not apply heat to the bath. See our 9600-20 complete heating system which features our 12125-32 economy…

  • …aluminum blocks located on stirring hotplates to heat standard round bottom flasks. All Heat-On blocks are manufactured from solid aluminum providing excellent, even heat transfer to the entire block, preventing hot spots. Heat-On weight-saving design reduces the mass of the block to be heated,…

  • …is used for 1000mL round bottom flasks. Each block can be used with other corresponding inserts: See the chart above. The anodized aluminum flask inserts are color coded for easy identification. Designed to fit directly on 135mm diameter circular top hot plate stirrers. PLEASE NOTE: FLASK INSERTS…

  • …bottom flasks. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are…

  • …Automation Friendly Uses Existing Hot Plate Stirrers   Works with Aggressive Solvents The OPTIBLOCK is a simple, easy to use tool for medicinal and process chemists. The block accepts up to eight different vial sizes and fits directly onto a hot plate stirrer having a 135mm top…

  • …and tubes. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized…

  • …heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Blocks, base…

  • …to samples. The integral block accepts up to 12 x 1.5mL tapered microcentrifuge tubes and there is also a thermometer well for temperature confirmation and calibration. The top surface of the block is covered to protect users from the hot block surface while the block itself is anodized to impart…

  • …Heating Reaction block is designed to rest on a round or square top hot plate stirrers. NMR heating block is an ideal replacement for oil baths. Block provides a safe and clean way for preheating NMR tubes, performing kinetics and degradation studies in 5mm NMR tubes. All blocks are anodized…

  • …support rod with larger diameter accessories on CG-1994-V, CG-1995-V, and CG-1997-V series hotplates. Offset adapter can be used with cooling/heating blocks up approx. 8-5/8"/220mm diameter. Offset created by adapter is 20mm center to center. Supplied complete with M8 stainless steel bolt.

  • …display Ceramic plate for chemical resistance and easy clean Accessory reaction blocks for flasks and vessels available Electronic speed control for constant speed even during changes in load Hot warning sign if temperature is above 50°C cTUVus approved for UL and CSA 2 Year…

  • 54-Well HotBlock®

    Environmental Express

    The large capacity SC154 Hot Block will digest up to 54, 50mL samples simultaneously in just a 15 X 21.5" footprint. Constructed of Graphite and Kydex® the corrosion-resistant SC154 was designed for environmental and other acid digestions prior to metals determinations. The SC154 uses a…

  • isoBlock™ Digital Dry Baths

    Benchmark Scientific

    …Quick-Flip Block Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, accomodate 0.2ml tubes, PCR strips or (in the dual block model…

  • …incubator. Supplied with two 2 1/8” x 3 1/4” blocks for holding 14 x 1.5 mL tubes. Standard Size Cooler Blocks (5152M65 and M70) Blocks are 3” x 3 3/4” x 2” and include self-contained sample extractor. Blocks can be accommodated by Boekel Hot Block Incubators as well as MiniFridge II. These fit…

  • MyBlock™ Digital Dry Baths

    Benchmark Scientific

    …dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, accomodate 0.2ml tubes, PCR strips or (in the dual block model only) a PCR plate. Other blocks

  • StarFish is available with a choice of two block formats: MonoBlocks, are single blocks with multiple wells of uniform size. They are ideal for experiments using the same-type vessel. PolyBlocks, are smaller segments (5 per StarFish) that can be “mixed-and-matched” to…

  • StarFish is available with a choice of two block formats: MonoBlocks, are single blocks with multiple wells of uniform size. They are ideal for experiments using the same-type vessel. PolyBlocks, are smaller segments (5 per StarFish) that can be “mixed-and-matched” to accommodate any combination of…

  • …OPT1000 is used for 1000mL round bottom flasks. Each block can be used with other corresponding inserts: See the chart above. The flask inserts are color coded for easy identification. Designed to fit directly on 135mm diameter circular top hot plate stirrers. PLEASE NOTE: FLASK INSERTS MUST BE…

  • 15ml And 50ml Chambers

    Diversified Biotech

    Each Chamber is an anodized aluminum block. Excellent temperature conductors. Use with hot plates or with our Ice Pans & Ice Buckets. NOTE: Does not fit CoolSafe System; use separately

  • …and has not been fortified or modified in any way. Analytical data for Certification was obtained using USEPA SW846, 3rd edition methods 3050 (hot block) and 3051(microwave) using nitric acid extraction. Analysis was carried out according to USEPA methods 6010 (ICP-ES), 6020 (ICP-MS) and 7000 (AES).…

  • …Benedict's solution Using positive and negative control samples   Features For 8 groups of 4 students  Requires a heat block or hot waterbath and micropipettes and tips   Applications HS-LS1: From Molecules to Organisms: Structures and Processes …

  • …isolates these fibers from circulating air to determine concentrations. Mixed cellulose ester membranes designed for use with the ‘hot block method’ White with black grid for high contrast during asbestos testing using microscopy Becomes transparent with acetone vapor…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.