High Vacuum Valve

High Vacuum Valve Plug, Synthware, Size: 0-4, 0-8, and 0-12mm available, Stem Material: PTFE,O-rings Material: Viton.

High Vacuum Valve Plug, PTFE Protected, Synthware, Size: 0-4, 0-8 or 0-12mm available, Plug has a machined in PTFE tip O-ring to make the primary seal.

High Vacuum Valve, T-Type, Synthware, Size: 0-12mm, Side Arm OD: 9mm.

High Vacuum Valve, Three Way, Synthware, Size: 0-8 or 0-12mm available, Side Arm OD: 9mm.

High Vacuum Valve Meteing Plug, PTFE Protected, Synthware, Size: 0-4, 08 and 0-12mm available.

This manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.), with a 10mm hose connection. The rear tube is for vacuum (22mm O.D.), with two 35/20 socket joints. Please order each component separately.

Tubing barbed check valves are constructed of chemical-resistant Kynar body and Viton valve for an inert high purity smooth and clear flow path. Use with acids, bases, water, chemical processing, and alcohols. Use for liquids, gases, pressure, and vacuum applications. Operating…

SYNTHWARE storage flask with high vacuum valve and side arm. Valve has a PTFE o-ring at the tip and PTFE wiper to protect the Viton o-ring on the shaft.

SYNTHWARE cylindrical reaction tube with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the tube while an inert gas purge is passed through the sidearm.

With a serrated hose connection (10mm O.D.) at left or right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.

Solvent Still Head, High Vacuum Valves Capacity: 250mL Joints: 24/40 Valve Size: 0-4mm

Addition Funnel, High Vacuum Valves, Synthware, Capacity: 100 or 250mL available, Joints: 14/20 or 24/40, High vacuum valve has PTFE O-ring at tip and PTFE wiper to protect Viton O-ring on shaft.

High Vacuum Valve, Three Way, PTFE Protected, Synthware, Size: 0-8mm, Side Arm OD: 9mm.

High Vacuum Valve, Metering, 90 degree, Synthware, Size: 0-8mm, Side Arm OD: 9mm.

High Vacuum Valve, 90 Degree, Synthware, Size: 0-4mm, Side Arm OD: 9mm.

High Vacuum Valve, 180 Degree, Synthware, Size: 0-4 or 0-8mm available, Side Arm OD: 9mm.

High Vacuum Valve, 180 Degree, PTFE Protected, Synthware, Size: 0-4, 0-8, 0-12mm available, Side Arm OD: 9mm.

High Vacuum Valve, Low Hold Up, PTFE Protected, Synthware, Size: 0-4, 0-8, 0-12mm available, Side Arm OD: 9mm.

Addition Funnel, Pressure Equalizing, High Vacuum Valve, Synthware, Capacity: 25-250mL available, Joints: 14/20, 19/22 or 24/40 available, Valve Size: 0-4mm, Valve has extended tip for semi-needle valve adjustment.

SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the flask while an inert gas purge is passed through the sidearm.

SYNTHWARE Schlenk storage tube with a high vacuum valve. The valve has a PTFE O-ring at the tip and a PTFE wiper to protect the O-rings on the shaft. Valve is used to control liquid or gas flow into the vessel.

SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 0-4 mm high vacuum valve in the side arm. The valve has a PTFE o-ring at the tip. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate…

High Vacuum Valve, Low Hold Up, Metering, Synthware, Size: 0-4, 0-8, 0-12mm available, Side Arm OD: 9mm.

The J. Young high-vacuum PTFE valve helps in controlling the atmosphere when using air-sensitive materials.Features: •PTFE piston with unique PTFE-sheathed elastomer O-ring seals •Grease-free glass-to-PTFE seals •High-vacuum to 10-6 torr

Vacuum line for SC-FAST high flow valve

…ball valve with T-full port and 3ea. 3/8” Hosebarb connections will hold a vacuum in your system, isolate the vacuum pump to prevent oil backup, and release/bleed air back into your system all in one.  An external vacuum gauge can be connected to the third valve to take a system vacuum…

Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

Wilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE, all…

Synthware valved transfer adapter. The 0-4mm high vacuum valves have two Viton o-rings on the shaft and an integral PTFE o-ring on the tip. The standard taper upper outer joint and lower inner joint are the same size.

This straight high-vacuum valve is for use in vacuum applications up to 5 x 10-7 Torr. Designed with a precision external thread for fine control Can be used as a bleed up to 1/2 turn Full open position is at 1-1/2 turns Primary seal is made with a FKM o-ring on a tapered seat …

This straight high-vacuum valve is for use in vacuum applications up to 5 x 10-7 Torr. Designed with a precision external thread for fine control Can be used as a bleed up to 1/2 turn Full open position is at 1-1/2 turns Primary seal is made with a FKM o-ring on a tapered seat …