High Vacuum Tubing

Compare Tool

Select up to 3 products

High Vacuum Tubing
1 - 32 of 109

  • Red Extruded Vacuum Tubing


    Flexible, smooth-walled vacuum tubing High-quality gum rubber Cartons contain 48 to 50 feet (14.6 to 15.2 m) of vacuum tubing. Listings indicate i.d. x o.d. x wall thickness in inches. Vacuum tubing is 10 ft per pack and 50 ft per carton.

  • 2" Vacuum Gauge

    Fischer Technical

    This Bourdon Tube Gauge is approximately 2" and features 0-30" inches of mercury dial. Includes a 1/4" brass thread on the bottom. This affordable gauge is compatible with a wide assortment of vacuum pumps.

  • SYNTHWARE Vacuum Manifolds, High Vacuum Valves

    Kemtech America

    With a serrated hose connection (10mm O.D.) at left or right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.

  • Tygon® S3™ E-3603 Non-DEHP Tubing

    Saint Gobain

    …to offer sustainable, flexible tubing products. The bio-based Tygon S3 line combines the high performance standards customers demand with an eco-friendly tubing design. Crystal clear and flexible, long-lasting and crack-resistant, the new Tygon S3 E-3603 tubing delivers the same superior performance…

  • SYNTHWARE Double Manifold, High Vacuum Valve

    Kemtech America

    This manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.), with a 10mm hose connection. The rear tube is for vacuum (22mm O.D.), with two 35/20 socket joints. Please order each component separately.

  • Vacuum/Pressure Pur Tubing

    Thermo Scientific Nalgene

    Suitable for pressure and vacuum applications Nalgene® 8030 Clear, flexible polyurethane Usable with fuels and oils, weak acids, alkalies and aliphatic or mineral spirit solvents; not recommended for strong mineral acids, aromatic or halogenated solvents Contains no…

  • Laboratory High Vacuum Pump

    Fischer Technical

    Tubing with 2ea. hose clamps, 1/2"ID.  For use with all Fischer Technical "LAV" series high vacuum pumps. High Vacuum Pump Oil Designed specifically for use with Fischer Technical  Company High Vacuum Pumps.  This non-detergent high vacuum pump oil…

  • EZ-Stream Vacuum Pump


    …optimized to reduce the noise down to 60 dB. High vacuum performance Thanks to its innovative design, the EZ-Stream™ pump can provide vacuum up to 600-700 mbar, and because it transfers liquids through the pump head this translates to a high flow rate performance. The pump can easily…

  • VacuCap® Vacuum Filtration Devices

    Pall Life Sciences

    Innovative Bottle-Top Filters for Fast Vacuum Filtration of 100mL to 5L of Aqueous Solutions Filter faster. Supor® membrane provides high flow rates. No need to constantly refill upper fluid reservoir  Draws directly from the mixing reservoir Eliminates the possibility of…

  • 1-Zone 1800°C Tube Furnaces

    Across International

    TF1800 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality 1900 grade alumina fiber insulation and the famous Kanthal (Sweden) 1900 grade molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace…

  • Mini Closed Loop Extractors

    Best Value Vacs

    … Weight: 18 lbs. Operating Temperature Range: -40°F to 160°F Ultimate Vacuum: as low as 10 Microns Designed to run a single can of solvent and reclaim it (350ml) Max FILL!! Construction: All components made of 304 Stainless Steel Max Vacuum -29.9inHg High Polish Interior

  • Parts & Accessories for Ai SolventVap Rotary Evaporators

    Across International

    …material: high borosilicate glass 3.3 Dual Receiving Flask Kits The Ai dual receiving flask kit allows you to switch between two receiving flasks, without interrupting your rotary evaporator's operation. Glass Feeding Tubes High quality glass feeding tube with PTFE open/close…

  • Savant™ SpeedVac Universal Vacuum Systems

    Thermo Scientific

    …Three-stage high efficiency oil free pump Max. Vacuum: <0.6 torr 36 liters/minute on 60Hz; 20 liters/minute on 50Hz models PTFE tubing and vapor path Post trap Ammonia Neutralizing Trap (ANT100) included Includes the VaporNet™ technology. This represents a valve in the vacuum

  • High Vacuum Pump Deluxe Experiment Kit

    Fischer Technical

    high vacuum in the classroom.  Demonstrate water boiling at room temperature as well as what happens to a balloon at high vacuum plus much more! Vacuum Pump Kit-, 1EA. LAV-3/G, 1EA. acrylic pump plate, 1EA. 6"X11" glass bell Jar, 5' HIGH VACUUM TUBING, 2 hose clamps, 1 quart high

  • Scienceware® Secador® Techni-Dome Vacuum Desiccator

    Bel-Art Products

    …accommodate awkward sized items.  These high strength desiccators will hold a full vacuum (29” Hg, 737 mm) at room temperature for 24 hours and remain airtight even if not under vacuum. The included gasket, with an application of vacuum grease assures a tight seal down to…

  • Gelmaster Gel Dryer Vacuum System


    …cold traps High condensed vapor capicity Cooling fan: 218 CFM Consists of a room temperature vapor pump and trap to condense and remove hot vapors and a high-efficiency, dry vacuum diaphragm pump for deep drying. Two pump system works as quickly as a two stage vacuum pump but requires…

  • Inoculating Loops & Needles

    Celltreat Scientific

    CELLTREAT inoculating loops and needles are made from high quality polypropylene and are available in 3 styles; needle, 1µl loop and 10µl loop. The stems are flexible and can be bent to access small volume tubes and dishes and they are color-coded for easy identification. The surface of…

  • Vacuum Pump


    …generating vacuum and extracting liquids and vapors*. Designed for excellent performance: Very low water consumption, constant ultimate pressure and high suction capacity . Pump fluid: water Overall length: approximately 210 mm (R 3/4'' connector fitted) High chemical…

  • Parts & Accessories for Vacuum Pumps

    Fischer Technical

    High Vacuum Tubing The Fischer Technical High Vacuum Tubing has an ID of 1/2" and can withstand 25 microns of pressure. High Vacuum Pump Oil Fischer Technical High Vacuum Pump Oil is available by the quart in packs of two or cases of twelve. High Vacuum Grease This vacuum

  • SYNTHWARE Schlenk Storage Tubes with High Vacuum Valves

    Kemtech America

    SYNTHWARE Schlenk storage tube with a high vacuum valve. The valve has a PTFE O-ring at the tip and a PTFE wiper to protect the O-rings on the shaft. Valve is used to control liquid or gas flow into the vessel.

  • Manifold, Vacuum

    Ace Glass

    high vacuum threaded stopcock. Plugs are PTFE with Nylon or PTFE handles and FETFE O-Rings. Ultimate vacuum of 10-7 can be realized with O-Rings as supplied. For bakable systems, order bakeable plugs with PTFE handles. Hose connections on stopcocks and vacuum line are size E for 13-15mm O.D. tubing

  • Ferrules, Graphite, High Temperature

    Ace Glass

    …glass-to-glass or glass-to-metal connections. All sizes are used with #7 Ace-Thred. Due to its high purity and unique properties, these ferrules make a monomolecular seal, one of the strongest seals known. NOte: Ferrules are not always suitable for vacuum applications. Supplied in packages of 10.

  • SYNTHWARE Reaction Tubes with High Vacuum Valve

    Kemtech America

    SYNTHWARE cylindrical reaction tube with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the tube while an inert gas purge is passed through the sidearm.

  • Schlenk Vacuum Sample Tubes

    Wilmad LabGlass

    These borosilicate glass Schlenk sample tubes incorporate a grease-free high vacuum 0-4mm valve and are suited for pressure/vacuum applications. Ideal for reaction and storage of air-sensitive compounds. Sidearm can be connected to inert atmosphere/vacuum source or a manifold.

  • ALDRICH Silicone grease Bayer, high vacuum


    Synonym(s): Baysilone ® ; Schlifffett Legal Information: Baysilone is a registered trademark of Bayer AG Packaging: each tube contains 35 g of vacuum grease

  • Vacuum Manifold

    Cannon Instrument

    …mounting on Cannon CT-500 bath covers (Model 3VM) or CT-1000 bath covers (Model 4VM) Includes 10-foot length of rubber vacuum tubing 9726V23, 1-inch bore x 5-inch o.d., for connection to vacuum/pressure regulator. Housing is epoxy-coated aluminum. Overall dimensions: 330 x 70 x 229 mm high.

  • Vacuum Ovens


    …tempered glass, assure an excellent seal at all vacuum levels Clear polycarbonate safety shield protects door glass from damage Front-mounted vacuum line fittings accept 1/4 i.d. vacuum tubing Side-mounted control panel, with all controls and vacuum line connections in a single, convenient…

  • Pressure Vacuum Valve NMR Tubes

    Wilmad LabGlass

    Wilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE, all…

  • Vacuum Check Valve

    Thermo Scientific Nalgene

    Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

  • Vacuum Aspirator Pump

    Bel-Art Products

    …check valve resists corrosive filtrates and fumes Quick-disconnect hose fitting accepts 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing Male thread faucet connection is 9.5mm (3/8") I.D Maximum attainable vacuum is 69.6cm Hg (27.4") with a flow of 6 liters (1.5 gallons) per minute

  • Fi-Streem Digital Vacuum Ovens


    …intervals) Vacuum Controls Vacuum gauge and valves conveniently located near bottom of front panel allow for convenient connection to vacuum pump, vapor trap or exhaust Reliable, needle type inlet and exhaust valves Serrated nozzles accept flexible vacuum tubing of .39 to .47…

  • Refrigerated CentriVap Vacuum Concentrators


    … Automatic vacuum release valve Built-in vacuum delay allows rotor to achieve speed before applying vacuum Audible alarm to signal completion of set point run time 1/2" OD aluminum hose fitting for connection to vacuum tubing. Vacuum pump is not included. Vacuum port with quick…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.