High Temperature Furnace

Compare Tool

Select up to 3 products

High Temperature Furnace
1 - 32 of 57
Sort
View
Show

Thermo Scientific

  • …melting. Standard equipment like high-temperature furnaces HT, except: Tmax 1600°C or 1700°C Robust refractory brick insulation and special backing insulation Furnace floor made of lightweight refractory bricks accommodates high charge weights Defined application within the…

  • The electr. driven lift-bottom considerably allows for proper charging of these high-temperature furnaces; molybdenum disilicide heating elements all around the cylindrical furnace chamber for an optimal temp. uniformity; volume 2; stainless steel housing.

  • furnaces are flexible and can be used for a wide range of applications. The high-quality fiber insulation ensures fast heating and cooling times. The SiC heating rods installed parallel to the working tube ensure excellent temperature uniformity. The price-performance ratio for this temperature

  • Required for the expansion, penetration, compression and flexure modes of operation. Used with high temperature furnace, part of Quartz Parallel Plate System Kit (Product Number: N5390138)

  • …Two-door design (front/back) for high-temperature furnaces > HTC 276/.. Labyrinth sealing ensures the least possible temperature loss in the door area Reinforced floor as protection for bottom insulation Exhaust air opening in the furnace roof Heating elements switched via SCR‘s…

  • …with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection Switchgear and control unit separate from furnace in separate floor standing…

  • …with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection Switchgear and control unit separate from furnace in separate floor standing…

  • …these furnaces all-rounders in research and the laboratory. These furnaces are also perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges. Tmax 1600°C, 1750°C, or 1800°C High-quality molybdenum disilicide heating elements Furnace

  • …for temperatures up to 1400°C, 1500°C, or 1600°C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces to all-rounders in the laboratory. Heating times of 40 minutes to 1400°C can be achieved, depending on the furnace model…

  • …can be ignited to burn off gas. Furnace chamber is welded and oil leak tested to ensure air tightness. Furnace door is sealed with high temperature silicon gasket. Built-in stainless steel water-cooling panel protects door sealing gasket when furnace is under heavy use. Microprocessor…

  • Furnace 1500C 1-Zone

    Lindberg/Blue M

    …Scientific™ Lindberg/Blue M 1500°C General-Purpose Tube Furnaces incorporate Moldatherm™ insulation to increase temperature uniformity, improve energy efficiency and to maintain low exterior cabinet temperatures during operation. Accommodate 1in., 2in. and 3in. O.D. process…

  • …muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility.  Excellent heat tightness with a firmly sealed chamber door.  High temperature

  • …Scientific™ Lindberg/Blue M™ Box and Tube Furnace Controllers for increased temperature accuracy. Features overtemperature control and multiple segment configuration; designed to work with the 1200°C split-hinge and 1500°C box furnaces. Features Fully wired with…

  • …plates (heating from three sides for muffle furnaces L 24/11 - LT 40/12) for an optimal temperature uniformity Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C Thermocouple type N (1100…

  • …chamber for uniform heat distribution Small sight glass window allows observation of load without opening spring-loaded, insulated plug door furnaces require a controller (see 5326H10 through H16) Model 5317B11 is a refractory plate heating unit. Model 5317B15 has the heating elements embedded…

  • …software included records both the temperature and the weight loss. Tmax 1100°C or 1200°C Heating from two sides Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace Highly durable cured vacuum fiber…

  • …fast-firing furnaces are ideal for simulation of typical fast-firing processes up to a maximum firing temperature of 1300°C. The combination of high performance, low thermal mass and powerful cooling fans provides for cycle times from cold to cold up to 35 minutes with an opening temperature of…

  • Ashing Furnaces

    Nabertherm

    …is preheated to ensure a good temperature uniformity. Tmax 1100°C Heating from two sides by ceramic heating plates Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace Highly durable, high-performance cured…

  • 3-Zone 1600°C Tube Furnaces

    Across International

    Ai TFM3 series 1600°C 3-zone tube furnaces use SiC and MoSi2 as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from Japan) with +/-1°C…

  • 2-Zone 1200°C Tube Furnaces

    Across International

    Ai TFM2 series dual-zone tube furnaces use the famous Kanthal (Sweden) coil wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from Japan) with…

  • 3-Zone 1200°C Tube Furnaces

    Across International

    Ai TFM3 series 3-zone tube furnaces feature the famous Kanthal (Sweden) resistance wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from…

  • This tube differs from the standard sample tube in that the 10mm bending platform is permanently fused to the base of the sample tube. Used with the high temperature furnace.

  • …optimum temperature uniformity. Energy efficiency, fast response, quick heat-up, rapid cool-down, and low exterior temperatures are designed into each furnace. Features include an adjustable over temperature control (OTC) that overrides the main controller and shuts off power to the furnace if high

  • 1800°C Muffle Furnaces

    Across International

    …series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1900 alumina fiber insulation and the famous Kanthal (Sweden) molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is controlled…

  • 1200°C Muffle Furnaces

    Across International

    CF1200 series muffle furnaces feature the famous Kanthal (Sweden) spiral wire coils embedded in Mitsubishi (Japan) high quality alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • …FO series represents the standard type of muffle furnaces which uses a microprocessor controlled thermoregulator and is capable of heat processing characterized by excellent repeatability. Due to high adiabatic characteristic, temperature rises in a very short time Space-saving and…

  • 1700°C Muffle Furnaces

    Across International

    CF1700 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1800 alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • 1400°C Muffle Furnaces

    Across International

    CF1400 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and silicon carbide (SiC) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • 1-Zone 1800°C Tube Furnaces

    Across International

    …series tube furnaces feature a chamber with Mitsubishi (Japan) high quality 1900 grade alumina fiber insulation and the famous Kanthal (Sweden) 1900 grade molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation…

  • 1-Zone 1400°C Tube Furnaces

    Across International

    TF1400 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and SiC heating elements. A dual-wall steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller…

  • 1-Zone 1700°C Tube Furnaces

    Across International

    TF1700 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.