Hepes Buffer Solution

2X Formulation: NaCI: 280 mM KCI: 10 mM Na₂HPO₄: 1.5 mM Dextrose: 12 mM HEPES: 50 mM pH: 7.0

CAS #: 7365-45-9 pH range: 7.0-8.0

Synonyms: 4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid Formula: C₈H₁₈N₂O₄S Formula Weight: 238.30 CAS No.: 7365-45-9 Density: 1.07 g/mL at 20 °C

HEPES Buffered Saline Solution Storage: -20C Application: HEPES Buffered Saline Solution is prepared from raw materials of the highest quality using tissue culture grade water and provided in a ready-to-use format. It is a component in the PromoCell DetachKits designed for the safe and…

HEPES Buffered Saline Solution Storage: -20C Application: HEPES Buffered Saline Solution is prepared from raw materials of the highest quality using tissue culture grade water and provided in a ready-to-use format. It is a component in the PromoCell DetachKits designed for the safe and…

HEPES Buffered Saline Solution Storage: -20C Application: HEPES Buffered Saline Solution is prepared from raw materials of the highest quality using tissue culture grade water and provided in a ready-to-use format. It is a component in the PromoCell DetachKits designed for the safe and…

Synonyms: HEPES Buffer; N-(2-Hydroxyethyl)piperazineN'-(2-ethanesulfonic acid) Storage: room temp Application: This 1 M stock solution contains HEPES adjusted to pH 7.35 with sodium hydroxide. Add the concentrated buffer to the cell culture medium to reach the desired concentration…

…change the osmolality of the solution. Most solutions of HEPES hemisodium will dissolve in water forming a pH at 7.5 with little to no adjustment. HEPES buffer commonly used in cell culture media. The addition of 10–25 mM HEPES provides extra buffering capacity when cell culture requires…

This bottle contains filtered HEPES (1 M), pH 7.5. The buffering range for HEPES is pH 6.8-8.2 and can be adjusted with KOH or NaOH. It is ready to use as supplied.

…Application: HEPES Sodium is a biological buffer often referred to as a "Good's" buffer. HEPES Sodium, used in conjunction with HEPES, is the most commonly used biological buffer formulation since the pKa of the buffer is 7.31 which corresponds to the physiological pH of 7.36. HEPES Sodium is…

1.0 M HEPES pH 7.2 is a concentrated stock solution and should be diluted appropriately with molecular biology grade water or equivalent to its final working concentration. This buffer consists of 1.0 M HEPES at a pH of 7.2 and was prepared using ultra pure reagents dissolved in DEPC treated…

Components: Sodium Chloride(140 mM), Potassium Chloride(5 mM), HEPES(25 mM), Calcium Chloride Dihydrate(2 mM), Magnesium Chloride Hexahydrate(2 mM), Dextrose / Glucose(10 mM), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 7.4…

…material. Protocols & Applications: Ensure correct concentrations of buffer solutions with the Buffer Calculator Other Notes: Easily compare specifications for HEPES sodium salt products with the HEPES sodium salt specification table . Packaging: 1 kg in poly bottle Packaging:…

…Anticancer agent Other Notes: •Phleomycin ready made solution is provided in a neutral buffer (20mM HEPES, pH>=7). Due to its sensitivity to acidic or alkaline medium neutral environment should be kept. •Phleomycin ready made solution is light sensitive and should be kept protected from…

… HEPES is an organic zwitterionic buffering agent effective in the physiological pH range of 6.8 to 8.2 (pKa 7.55). It is typically used in cell culture at concentration between 5mM to 30 mM. This product has been qualified for use in cell culture. Preparation Note: Prepared from HEPES free…

…buffer often referred to as a "Good's" buffer. It is the most commonly used biological buffer since the pKa of HEPES is 7.31 which corresponds to the physiological pH of 7.36. HEPES is considered to be non-toxic to culture cell lines, highly water soluble and provides high solution…

A peptidyl nucleaside antibiotic isolated from the culture broth of Streptomyces griseogenes, inhibits protein synthesis in both prokaryotes and eukaryates. Supplied as a 10mg/mL sterile solution in HEPES buffer.

…HEPES, 3 mM SDS, pH 8 Come in convenient ready to use packs with no weighing or adjusting of pH required. These buffer packs have a longer shelf life when compared to the buffer solutions Highly reproducible better compositions Application(s): JAW™ Tris-HEPES-SDS Buffer…

…equimolar concentrations of HEPES and of sodium HEPES can be mixed in approximately equal volumes, back-titrating with either solution to the appropriate pH. HEPES, free acid: HEPES, free acid HEPES has been described as one of the best all-purpose buffers available for biological…

…the target cell with assistance from perforin.-á Granzyme B specifically cleaves after Asp residues, and particularly processes and activates various pro-caspases.-á This induces apoptosis in the target cell. Physical form: Lyophilized powder, containing HEPES buffer (original solution at pH 7.5)

… HEPES HEPES (N-2-hydroxyethylpiperazine-N’-2-ethanesulphonic acid) provides an alternative to the use of bicarbonate for buffering because it does not require elevated levels of CO2. Unlike the low pKa of bicarbonate, HEPES has a pKa of 7.66 making it a much stronger buffer in the…

… Formula Weight: 238.30 CAS No.: 7365-45-9 Purity: ≥99.5% (titration) Protocols & Applications: Ensure correct concentrations of buffer solutions with the Buffer Calculator Other Notes: Easily compare specifications for HEPES products with the HEPES specification table .

MDL No.: MFCD07370436 Storage: -20C UNSPSC Code: 12352203 Immunogen: synthetic phosphopeptide corresponding to the region of human ATF2 containing serines 490 and 498. Physical form: Solution in 10 mM HEPES (pH 7.5), 150 mM NaCl, 100 mug/mL BSA, and 50% glycerol.

…(IAP) protein family, inhibits the activation of caspase 9 in cell extracts incubated with cytochrome c and dATP. Physical form: Solution in 25 mM Hepes, pH 7.5, 0.1 M sodium chloride, and 1 mM dithiothreitol. Analysis Note: Biological activity is measured by its ability to inhibit DEVD-afc…

… Immunogen: synthetic phospho-Tyr1054/1055 peptide corresponding to residues around Tyr1054/1055 of human Tyk2. Physical form: Solution in 10 mM sodium HEPES, pH 7.5, containing 150 mM sodium chloride, 100 mug/ml bovine serum albumin and 50% glycerol Specificity: Detects human Tyk2 only when…

…outer mitochondrial membrane where its interaction with Bak alters mitochondrial membrane permeability. Physical form: 0.2 mum filtered solution in 25 mM HEPES, pH 7.5, and 0.1 M KCl. Analysis Note: Measured by its ability to induce cytochrome c release from isolated mouse liver mitochondria.

…blotting (diluted 1:1000). Immunogen: synthetic phosphopeptide corresponding to amino acids residues surrounding the Xenopus polo-like kinase kinase phosphorylated on serines 482, 486 and 490. Physical form: Solution in 10 mM HEPES (pH 7.5), 150 mM NaCl, 100 mug/mL BSA, and 50% glycerol.

…lung. Immunogen: synthetic peptide corresponding to residues around Ser392 of human p53 conjugated to KLH. Physical form: Solution in 10 mM sodium HEPES, pH 7.5, containing 150 mM sodium chloride, 100 mug/ml bovine serum albumin and 50% glycerol Specificity: Does not react with…