Heavy Duty Stirrer

Compare Tool

Select up to 3 products

Heavy Duty Stirrer
1 - 32 of 59
Sort
View
Show
  • Chlorofluorocarbon grease for use at speeds up to 6000 r.p.m. with ACE standard glass assemblies. Use 8040 water-cooled type bearing for long-time stirring (over one hour). Below one hour, 8038 type may be used at 1500 r.p.m.; eight hours at 1000 r.p.m. High chemical inertness unaffected by strong…

  • PTFE packing for use in 8112 stuffing boxes. This material conforms readily to the contour of the stuffing box and shaft.

  • Stirrer blade made of 3/16" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 19mm OD.

  • Biostir Heavy-Duty Magnetic Stirrers

    DWK Life Sciences (Wheaton)

    Conforms to UL, CSA and CE Standards Stirrer speeds from 150-1200 rpm Digital display of actual stirring speed Rotation speed clearly visible for consistent results Variety of programmable operating modes Flask sizes up to 3 liters Designed specifically for use with…

  • A compact, heavy duty air motor with highly damped muffler. Complete unit consists of an air hose with a snap coupling on motor end and shut-off valve on the other. Motor will develop 1.5 hp. at 90 lbs. air pressure. Speeds are variable from 300 to 3000 r.p.m. It consumes approximately 1.98m3 free…

  • Heavy duty epoxy coated alloy clamp has high tensile strength and corrosion resistance. Can be used to support stirrers, temperature monitors and condensers. Large hand knobs allow easy adjusment and secure clamping power. Useful wherever clamping at 90° is required.

  • Features:  Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space  Perfluoro O-Rings on Tip and Plunger The…

  • Features: Glass Body Features a Heavy Duty GL Style Glass Thread. Auto-Stop When Opening the Valve. Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve. Zero Dead Space Perfluoro O-Rings on Tip and Plunger The CG-1968-GL…

  • Trubore stirrer assembly consists of the standard taper outer glass bearing, PTFE inner bearing, glass-filled PTFE bushing and lock nut, compression seal saddle o-ring, PTFE blade and either a glass or stainless stir shaft.

  • PC-611 Stirrer

    Corning

    …the vessel. They operate on 120V/60Hz and are UL and CUL approved to meet needs in North America and other locations with similar requirements. Heavy duty motor and rugged plastic (ABS) top will provide years of reliable service. More compact and lower cost than competitive units. UL/CUL approved. 1…

  • Heavy duty 19mm stirrer bearing for use in stirring large volumes under high torque. Bearing has a tooled lubricant cup.PLEASE NOTE: NOT FOR USE WITH CG-2087 or CG-2088 PRECISION GROUND AND POLISHED STIRRER SHAFTS. STIRRER BEARINGS, 19MM, HEAVY DUTY, JACKETED, Similar to CG-2082 but with a water…

  • Trubore bearing, heavy duty, standard taper joint, self-aligning. Unique 3 piece design of Trubore inner bearing, compression seal nylon bushing and glass standard taper adapter allows for moderate misalignment of stir motor and the bearing cannot sieze the shaft. For use with 8077 & 8078 19mm od…

  • …a sampling valve. It is compatible with most Phipps & Bird two- four- and six-paddle Jar Testers, as well as most other stirrers. An ATA-approved heavy duty carrying/storage case is available separately. All Phipps & Bird JarTesters are 24VDC and come complete with an adapter…

  • Heavy duty, 28mm O.D. glass stirring shaft for use with ACE 12845 reactors. Shafts are pre-drilled to accommodate 8091,8093 & 8101 agitators for 28mm od shafts. Recommended for use with either our 8067 Trubore™ bearing with debris trap or our 8050 non-shedding bearing. For motor connection,…

  • …Adapter is also available for use with CG-2047 flexible shafts having 5/16” end fittings. Overall length of the coupling is 4”. Supplied complete with an allen wrench set.PLEASE NOTE: STIRRER SHAFT COUPLING TO FIT 25.4MM AND 30MM OD STIRRER SHAFTS HAVE A HEAVY DUTY HELICAL S.S. SPRING.

  • Features:  Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space  Perfluoro O-Rings on Tip and Plunger. The…

  • Agitators are made entirely of PTFE and glass filled PTFE and are for use with 19mm or 25.4mm OD stirrer shaft CG-2097 and are available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated…

  • Scienceware® Battery Powered Stirrer

    Bel-Art - SP Scienceware

    Portable light weight stirring. Ideal for field use where no electricity is available. It can be used for up to 24 hours of continuous operation; mixing up to 1 liter with a maximum stirring speed of 900 rpm. 9 1/4” x 5” x 3 1/2” H No cords Portable and lightweight for…

  • … Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five paddle heads and two…

  • …excellent stirring at the bottom of 2L through 20L reactors, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a glass filled PTFE safety pin. Heavy duty blades are 7mm thick. Supplied complete with one glass filled PTFE safety…

  • Model 134- 1 Top mounted standard speed control Heavy duty power at an economical price Offers higher torque over a wide speed range Perfect for mixing emulsions that require high speed and torque Mixes light oils at speeds of 50 to 750rpm Model 134- 2 Top mounted standard speed control…

  • Electric Laboratory Stirrers

    Arrow Engineering

    …General Duty Stirrer (8583L24) Will handle a wide range of applications and more viscous materials Delivers 39 in.-oz. or 2.43 in.-lbs. of constant torque throughout its speed range of 0 to 2,000 rpm. Gear Head (8583L28) Specially designed for heavy duty viscous…

  • …Accommodates oversized vessels. Microprocessor control: Precisely regulates speed through the entire range. Stirring function, with continuous duty motor and magnet, maintains set speed even under changing load or viscosity. Adjustment knob: Basic speed control knob with 1 to 10 dial…

  • … High-precision, microprocessor-controlled stirrers have superior operating and safety features. 600 watts provides maximum temperature of 300°C. Hotplate cutout has over-temperature, sensor short circuit and sensor breakage protection. Stirrer has speed control of up to ±1300 rpm with…

  • Tank clamp lets you mount a mixer head and a controller support (either model 04552-70 or 04552-75) directly onto an open top drum or container (maximum 1-1/2" [38 mm] wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x 5/8"…

  • Our modular Stir-Pak heavy-duty mixer system allows you the flexibility to create the best system for your mixing applications. System components are sold separately or as convenient complete system packages. Complete System—Everything you need! These convenient, ready-made systems…

  • …adjustments. Lab-lifts are ideal for use in fume hoods or bench tops and hold a variety of items including glassware, hot plates, baths and magnetic stirrers. 17” Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps,…

  • …hollow, heavy duty. Knob type shafts accept 8091,8092,8093,8100 agitators and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks. Heavy duty design…

  • …08 mm length. Heavy duty for stirring large volumes of liquids on large magnetic stirrers. Stir Bar Polygonal 159X27 mm (1212Z67) Product Dimensions (l x w x h) : 0x1.045x6.375in Extra Large Polygonal Stirring Bars. Polytetrafluoroethylene. 159 mm length. Heavy duty for stirring…

  • …technology with solid state electronics. Motors generate 1/17 horsepower and are totally enclosed. Stirrers include motor, mounting bracket, controller paddle, propeller, 3-jaw keyless chuck and arbor and a heavy-duty 90° clamp. NOTE: Model 8836M34 Lab Stand is recommended to mount GT24 Stirrers.

  • Agitators are made entirely of PTFE and glass filled PTFE and are for use with 30mm OD stirrer shaft CG-2097 in 75 and 100L reactors. The 45°; angle impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. The upper agitator hub is open so that…

  • …supplied with 1.5 meter 3-wire cable for controller connection. Motor is UL & CE rated. Controller: solid state 120v, 10 amp AC max. or 0-120v, 6 amp DC max. Features rear ring stand clamp, Fwd-Off-Rev. switch. Supplied with 1amp fuse and heavy duty 1.8 meter 3-wire power cord with NEMA plug.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.