Heavy Duty Overhead Stirrer

A compact, heavy duty air motor with highly damped muffler. Complete unit consists of an air hose with a snap coupling on motor end and shut-off valve on the other. Motor will develop 1.5 hp. at 90 lbs. air pressure. Speeds are variable from 300 to 3000 r.p.m. It consumes approximately 1.98m3 free…

… Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five paddle heads and two…

…Corning® PC-611 stirrers have an 11 x 11 inch plastic (ABS) top and can stir large volumes of liquid with ease. These stirrers are designed for 5 gallon vessels (19L), but can stir up to 10 gallons and can handle many applications that previously required an overhead stirrer. This powerful stirring…

…Adapter is also available for use with CG-2047 flexible shafts having 5/16” end fittings. Overall length of the coupling is 4”. Supplied complete with an allen wrench set.PLEASE NOTE: STIRRER SHAFT COUPLING TO FIT 25.4MM AND 30MM OD STIRRER SHAFTS HAVE A HEAVY DUTY HELICAL S.S. SPRING.

…General Duty Stirrer (8583L24) Will handle a wide range of applications and more viscous materials Delivers 39 in.-oz. or 2.43 in.-lbs. of constant torque throughout its speed range of 0 to 2,000 rpm. Gear Head (8583L28) Specially designed for heavy duty viscous…

…supplied with 1.5 meter 3-wire cable for controller connection. Motor is UL & CE rated. Controller: solid state 120v, 10 amp AC max. or 0-120v, 6 amp DC max. Features rear ring stand clamp, Fwd-Off-Rev. switch. Supplied with 1amp fuse and heavy duty 1.8 meter 3-wire power cord with NEMA plug.

Trubore bearing, heavy duty, standard taper joint, self-aligning. Unique design is forgiving of slight misalignment of stir motor and shaft. Recommended for use with our 9534 6mm precision ground stir shaft.

…Hz operation. Includes drive motor, mounting bracket, controller, 3-jaw keyless chuck and arbor, paddle, propeller and heavy-duty 90° clamp. Heavy Duty, Model HST20 Totally enclosed, 1/8 hp, permanent magnet, DC motor Direct-drive, with rpm/torque readout and X-Y output Maximum rpm: 2,500 …

…technology with solid state electronics. Motors generate 1/17 horsepower and are totally enclosed. Stirrers include motor, mounting bracket, controller paddle, propeller, 3-jaw keyless chuck and arbor and a heavy-duty 90° clamp. NOTE: Model 8836M34 Lab Stand is recommended to mount GT24 Stirrers.

…100 and 150mm S.S. Support Clamps.  Adjustable Top Support Bracket for Each Overhead Motor is Vertically Adjustable and Accommodates Most Brands of Overhead Stirrers. Mounting Clamps Accept Overhead Stirrers with a MAX Support Arm of 5/8” Diameter.  Unique Design Allows Easy…

…100 and 150mm S.S. Support Clamps.  Adjustable Top Support Bracket for Each Overhead Motor is Vertically Adjustable and Accommodates Most Brands of Overhead Stirrers. Mounting Clamps Accept Overhead Stirrers with a MAX Support Arm of 5/8” Diameter.  Unique Design Allows Easy…

…S.S. Support Clamp.  Adjustable Top Support Bracket is Vertically Adjustable and Accommodates Most Brands of Overhead Stirrers. Mounting Clamps Accept Overhead Stirrers with a MAX Support Arm of 5/8” Diameter.  Unique Design Allows Easy Installation/Removal of Glassware. …

… Middle Support Bracket is Vertically Adjustable and is Supplied with a Set of Heavy Duty Clamps.  Top Support Bracket is Vertically Adjustable and Provides for Attachment of an Overhead Stirrer. Mounting Clamps Accept a MAX Support Arm Of 5/8” Diameter.   Unique…

…for Reactors up to 1000mL and a Set of Heavy Duty Clamps for use with 2 thru 5L Reactors Top Support Bracket is Vertically Adjustable and Provides for Attachment of a Single or Two Overhead Stirrers. Mounting Clamps Accept Overhead Stirrers with a MAX Support Arm of 5/8”…

…a sampling valve. It is compatible with most Phipps & Bird two- four- and six-paddle Jar Testers, as well as most other stirrers. An ATA-approved heavy duty carrying/storage case is available separately. All Phipps & Bird JarTesters are 24VDC and come complete with an adapter…

Tank clamp lets you mount a mixer head and a controller support (either model 04552-70 or 04552-75) directly onto an open top drum or container (maximum 1-1/2" [38 mm] wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x 5/8"…