Heating Mantles With Controls

Compare Tool

Select up to 3 products

Heating Mantles With Controls
1 - 32 of 52
Sort
View
Show
  • …uniform heat to round-bottom flasks Excellent alternative to other heating methods like a bunsen burner Ideal for use with a basket ring stand Low Watt Density Specifications Fiberglass cloth outer shell Uniform, low-watt density knitted and braided heating element.…

  • Unique Electrothermal replaceable heating element/cartridge Heating mantle and controller in one unit Polypropylene housing The EM Series Electromantle incorporates the proven electrothermal coiled, flexible heating element in special insulation and features a “power…

  • Heating Mantles

    Glas-Col

    …Glass cloth mantle, which is suspended in cylindrical aluminum housing; heavily insulated against heat loss Heating element is distributed over bottom and sides. Housing is grounded to third wire of line cord, which includes twistlock connector for detachability. 115 V, 60 Hz with 3-wire…

  • Micro- and Macro-Kjeldahl Extraction Heaters

    Electrothermal (Cole-Parmer)

    … Each heating mantle has it own energy regulator incorporating an On/Off switch and a "Mains to Heater" amber neon indicator. There is also a "Mains On" clear neon indicator on the front panel. The lower part of the unit houses dedicated controllers for each recess.…

  • Combination Heating Mantles

    United Scientific Supplies

    …and extension clamps for holding glassware. Mantles feature polyurethane coated aluminum exterior and high quality knitted mantles with glass fiber underlay for uniform distribution of heat. Maximum operating temperature is 400°C. Mantles can be used in a wide range of ambient temperatures,…

  • Multi (Extraction) Mantles: 6 Recess Model

    Electrothermal (Cole-Parmer)

    The Multi (Extraction) Mantle with six recesses has a built-in electronic controller and offers a choice of heater only (EME6) or heater/stirrer (EMEA6) combination models. They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains…

  • EXTRACT APP/STIR 6W 500ML 110V

    Techne (Cole-Parmer)

    The EMEA60500/CEX1 Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…

  • Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.

  • 1-Way Heating Controllers

    Electrothermal (Cole-Parmer)

    …They all have a regulator control knob which can be turned clockwise to increase power. As the knob is turned, the heating controller's amber neon light will pulsate to show that power is being supplied to the equipment being controlled, e.g. mantles, heating tape or cord. The pulse frequency…

  • Heating Mantles

    Across International

    Across International heating and stirring mantles come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds. The DigiM mantle is equipped with two sets of thermocouples for proper…

  • …to heat a variety of round bottom shaped vessels, to either increase temperature or keep media at a constant process temperature. All heating mantles are manufactured to high quality standards of craftsmanship. The exterior of the HM Metal-Housed Heating Mantle with Built-in Controller is a…

  • …pilot lamp, 3-wire receptacle (U.S. plug) on a 12 in. cord, and a 4 ft, 3-wire power cord with U.S. plug. Used to control THERMOWELL heating mantles or other resistive heating circuits (hot plates, heat tapes, water baths, etc.). Available in solid-state or proportional on/off models. All…

  • Heating Mantles with Stirrer

    United Scientific Supplies

    Heating and stirring functions are independently controlled by 2 separate knobs. Each unit is supplied with a magnetic stir bar. Mantles with stirrer feature polyurethane coated aluminum exteriors and a high quality knitted mantle with glass fiber underlay for uniform distribution of heat.

  • Heating Mantles

    United Scientific Supplies

    These heating mantles are designed for use with round bottom flasks. Features include polyurethane coated aluminum exteriors and a high quality knitted mantle with glass fiber underlay for uniform distribution of heat. Maximum operating temperature is 400°C. Mantles can be used in a wide range…

  • CMUA Electromantles share all the excellent features of the CMU Electromantle, but with the added functionality of magnetic stirring. For convenience and safety, the electric circuitry for stirring is built into the base of the heater, enabling powerful stirring over a wide range of solution volumes…

  • Provides a safety backup for lab heating processes Compact, 1/16 DIN unit Allows for over-temperature limiting Terminates primary control when temperature exceeds set limit Model 5916A30 will accommodate a non-conductive load to 1200 watts; Model 5916A35 to 2400 watts.…

  • …ramping control Microprocessor based PID control Ramp-rate or time-based programming profiles 24 Step program capability Program looping Guaranteed soak (dwell) deviation Auto tuning function allows automatic setting of control parameters with a minimum…

  • Digi-Mantles

    Electrothermal (Cole-Parmer)

    …along with a 3-digit display indicating the actual temperature from ambient to 450°C. Stirring speeds from 100 to 2000rpm are obtained by lightly touching the stirrer speed keys. Temperature Control Heating is controlled by a modern state of the art microprocessor, which displays the heat

  • Mantle Accessory

    Glas-Col

    …investigation* All 115 volt units are CSA certified Electrical: 4 foot separable 3 wire cord and locking connector Equipped with compact power controls that have solid state circuitry. Positive off switches and pilot lights. *ATF Standard Methods for Detection of Petroleum Based…

  • …positive break when turned off. Pilot light is connected across the output side of the control and indicates power to the load. Features simple dial setting which, with the desired temperature determined on the initial run, controls repeat operation. Dimensions: 63 x 108 x 51 mm H; 120 V, 50/60 Hz.

  • EMEA Heating Mantles For Soxhlet Extraction

    Electrothermal (Cole-Parmer)

    heated at the same time Three positions for 100, 250, 500 or 1,000 mL flasks Designed to maximize safety Separate heating controls for each position Temperature range to 450°C Stirring speed: 50 to 1,000 rpm Solid state controllers Each position is provided with

  • …and convenience with several new features not found on other heating mantles Chemical-resistant cabinet Housing remains cool to the touch during operation UL fire-rated plastic enclosure Spills are channeled away from heating element Built-in proportional power controller maintains precise…

  • …stand with aluminum clamp and stability bracket, and two 48" lengths of rubber tubing with screw connectors. The heating mantle with stirrer features a polyurethane coated aluminum exterior and a high quality knitted mantle with glass fiber underlay for uniform distribution of heat.

  • Controls two separate circuits independently Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Use on bench top or mount to lattice work using clamp provided on back panel Will…

  • …adjusted between 30 and 60V. Controller is 8"; W x 6"; D x 3.7"; High. All units are supplied with a 6ft separable power cord, a grounded, 3-wire receptacle and lighted power switch. Controller for use with CG-14000 and CG-14002 Heating Mantles rated at 30 or 60 Volts. …

  • … Self-supporting: can be placed directly on counter top Easy viewing of flask contents Stackable for easy storage Includes 6-foot (1.8m) power cord with either a NEMA 1-15 (for 120VAC) or NEMA 6-15 (for 240VAC) plug Temperature controller is required for this product

  • Use with heating mantles, tapes, cords, small ovens and other resistive heating loads Digital dual output display for set point and process temperature indication Automatic tuning for accuracy with minimum overshoot Auto cold junction compensation and thermocouple break protection …

  • Multi (Extraction) Mantles: 3 Recess Model

    Electrothermal (Cole-Parmer)

    The Multi (Extraction) Mantle with three recesses has a built-in electronic controller and offers a choice of heater only (EME3). They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains "cool-to-the-touch". For Heater…

  • with a 20 x 15in footprint, 33 in high. Reactor features a 100mm (4 in) head with (4) 24/40 joints, an allihn condenser, a pressure equalizing funnel, overhead glass stirring assembly with variable speed motor and controller, heating mantle with type J PTFE covered probe and controller. All wetted…

  • Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Mount on lattice work or bench top Model 5915A01 will accommodate non-conductive loads to 1200 watts; model 5915A05 to 2400 watts. Electrical…

  • …time proportional digital controller²for use with type J temperature probes with a male SMP/OST²plug. Controller has two 120vac front outlets (1800 watts²total from either outlet or in combination) ideal for two²circuit heating mantles and one rear alarm outlet. Features²include over-temp…

  • …J-KEM® Scientific HCC controller is designed to power large scale equipment such as 50L to 100L heating mantles. Designed with the same safety features as the Model 270, the HCC incorporates a 100 hour digital timer to turn heating on or off. PLEASE NOTE: THIS CONTROLLER REQUIRES ONE DUAL…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.