Heat Vacuum Desiccators

Compare Tool

Select up to 3 products

Heat Vacuum Desiccators
1 - 12 of 12
Sort
View
Show
  • …2.4L PYREX® desiccators is designed for general analytical work. The sturdy knob makes the cover easy to handle. Approximate bowl volume is 2400mL. For replacement cover, see No. 3081-150CO. For lower part only, see No. 3081-150LO. Warning: Do not heat or subject to pressure. Not for vacuum

  • …affected by the vacuum. The open position is indicated by the molded arrow on the cap. A quarter turn from this position closes the desiccator. For ease in use and improved performance, it is recommended that the Standard Taper sleeve be lubricated with a silicone-based vacuum grease. The tubulation…

  • Vacuum, improved form. Material to be dried is placed in the inner tube, 15.2cm long by 25.4mm I.D. When the liquid in the distilling flask boils, the vapors pass through the drying chamber and heat the inner tube at a constant temperature. The vapors then ascend to the reflux condenser, condense…

  • More convenient desiccant monitoring Indicating Silica gel Individually sealed in aluminum foil For use with desiccator cabinets or non-vacuum desiccators, with analytical balances or precision laboratory instruments. Clear polystyrene dish allows instant visual inspection of…

  • Hi-Temp Vacuum Ovens

    Thermo Scientific

    …off up to eight times per day with automatic temperature/ vacuum control in real time steps Dual displays provide constant day/ time and temperature/pressure updates every 5 seconds Recommended for: Desiccation Vacuum embedding Plating Process control Inert atmosphere

  • …heated,(low voltage: 40 volts, 10 amps max.) Top is not heated, but has insulation cover. May be used as a vacuum oven at temps up to 180 degrees C continuously. The top has an observation stripe for visibility & is supplied with vacuum take-off valve. Uncoated top available. All codes include…

  • …PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 5800mL. For replacement cover, see No. 3081-200CO. For lower part only, see No. 3081-200LO. Warning: Not for vacuum applications. Do not heat or subject…

  • …existing vacuum source and trap. Complete system comes with solvent-resistant PTFE vacuum pump and vapor trap. Built-in pump has 1.7 m 3 /h capacity and produces <20 hPa (<20 mbar) maximum vacuum. The Model 5301 also has a desiccator mode allowing the use of the heated chamber and vacuum

  • …plus vacuum concentrator was designed with you in mind to deliver an ergonomic, intuitive, and durable solution that fits comfortably right on your lab bench! An advanced heating technology provides the best treatment for your sample which assures quick, efficient and gentle vacuum concentration…

  • …PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 10,500mL. For replacement cover, see No. 3081-250CO. For lower part only, see No. 3081-250LO. Warning: Not for vacuum applications. Do not heat or subject…

  • Xenomax® Pre-Weighed TSS Filters

    Xenosep Technologies

    …microfiber filters which have been vacuum rinsed three times with 20 mL aliquots of reagent grade water, dried at 105°C for at least one hour, desiccated to room temperature, weighed to the nearest 0.1 mg and then placed in an aluminum pan with an affixed, heat resistant bar code label…

  • AldraAmine trapping pkt

    MilliporeSigma

    …that has been tested for safe long-term exposure to DMF and NMP. Packets are vacuum sealed.• Effectively reduces amine and water impurities for up to 3 months• Each packet individually vacuum sealed and fully activated for immediate use• Safe for automated…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.