Heat Block

Compare Tool

Select up to 3 products

Heat Block
1 - 32 of 291
Sort
View
Show
  • Aluminum Heating Blocks

    DWK Life Sciences (Kimble)

    Ideal for use in place of a sand bath in microscale experiments. Excellent heat transfer Does not interfere with magnetic stirring

  • The DynaBloc heating system supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within various sizes of small, round bottom flasks. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm)…

  • Dry blocks for us with Grant Dry Block Heating Systems: QBD1, QBD2, QBD4, QBH2, QBA1 and QBA2.

  • heat transfer block, 9594-12 for use in place of a glass sand bath in Microscale experiments. Offers excellent heat transfer and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect better heat

  • The DynaBloc heating system supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within various sizes of small, vials and tubes. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base…

  • Heat Transfer Block, Minivials, Synthware, Holds 3.0 and 5.0 mL heavy wall reaction vials.

  • …heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Blocks, base…

  • … NMR Heating Reaction block is designed to rest on a round or square top hot plate stirrers. NMR heating block is an ideal replacement for oil baths. Block provides a safe and clean way for preheating NMR tubes, performing kinetics and degradation studies in 5mm NMR tubes. All blocks are anodized…

  • Dri-Block Dry Heat Baths

    Techne (Cole-Parmer)

    For precise temperature control; ±0.1°C Provide a safe, dry, constant temperature source in the laboratory for the purpose of incubation, boiling, inactivation, wet ashing, enzyme analysis, and a variety of clinical and industrial applications. NOTE: aluminum insert blocks are not included.

  • …and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer. Heaters require OHAUS modular heating blocks for operation. Modular blocks are sold separately . Operating…

  • Heat Transfer Block, Round bottom flasks, Synthware, Holds 5, 10 and 25mL round bottom flasks.

  • Storage: 20-25°C

  • OptiTherm® aluminum reaction / heating blocks provide a SAFE and cost effective solution for replacing your existing oil baths and heating mantles. The innovative PTFE shield on the unit reduces the exterior exposed surface temperature by as much as 100°C. For example the PTFE shield would…

  • …aluminum blocks located on stirring hotplates to heat standard round bottom flasks. All Heat-On blocks are manufactured from solid aluminum providing excellent, even heat transfer to the entire block, preventing hot spots. Heat-On weight-saving design reduces the mass of the block to be heated,

  • …design block extraction tool included as standard, for easy and safe removal of blocks sold exclusively of blocks - see Accessories for blocks The QBA series of analogue block heaters present a contemporary high quality solution at a cost-effective price for heating applications…

  • …Efficient heater features close tube and block contact with a low density design for exceptional temperature uniformity. The heated lid model includes a second heater in the lid to help prevent condensation. Mini Dry Block Heaters include a block lifting tool. NIST traceable calibration…

  • Compact, flexible, easy to use systems for rapid heating and cooling of microtubes; very effective tools for DNA/RNA sample preparation techniques. Cooling/heating setting range from - 10°C to 100°C, with very rapid cool down and heat-up times Stability ± 0.1°C …

  • … Aluminum Construction Provides Excellent Heat Transfer While Not Interfering with the Magnetic Field Holes are Spaced for Optimum Stirring of All Vials Holder Fits All 135mm Diameter Hot Plate Stirrers Each Section of the Block is Engraved with the Vial Size for Easy Identification…

  • Safety Pie Plate Holder keeps up to Four pie wedges securely locked together on the hotplate Aluminum construction provides excellent heat transfer while not interfering with the magnetic field Interchangeable pie wedges permit various sized vials or flasks on one hotplate Holes are spaced…

  • Tube Block

    Crystal Technologies

    …Digital Dry Baths are microprocessor controlled with an automatic PID temperature control program, providing accurate and uniform temperature distribution on the thermal block. These Digital Dry Baths are ideal tools for a wide variety of life science, clinical and general chemistry applications.

  • Vials Block

    Crystal Technologies

    …Digital Dry Baths are microprocessor controlled with an automatic PID temperature control program, providing accurate and uniform temperature distribution on the thermal block. These Digital Dry Baths are ideal tools for a wide variety of life science, clinical and general chemistry applications.

  • …Heater Block adapter is designed to fit all hot plate stirrers with a 135mm diameter top plate. Lower edge of block covers side of top plate and prevents block from slipping, allowing for safe heating of your Chemglass or Genevac blocks. The innovative PTFE shield on the heating block keeps the…

  • For use with Corning® LSE™ Digital Dry Bath Heaters, Single Block.

  • 9600-20 Complete system for heating and or mixing using Instatherm block, Instatherm bath, Ace temperature controller and ceramic-top magnetic stirrer. Design to handle 24 - 16mm OD tubes.

  • Flexi-Therm Dry Block Heater

    Vitl Life Science Solutions

    …new generation of dry block heater You shouldn’t have to waste time making sure that your samples are being heated to the temperature that your block heater says they are. You shouldn’t have to put tin foil over your consumables to make sure the heat stays in. You…

  • Heating Digital Shaking Drybath Increase lab versatility with the Digital Shaking Drybath, which can be used as a drybath, shaker, or both. FEATURES PID control ensures precise temperature control Speed range from 150 to 1500rpm (block dependent) Program Storage 10…

  • …Dual Block Model for Simultaneous Digestions Two heat blocks in the DRB200 Dual Block Models reactor give the operator independent control of two temperatures and durations. Use this option to run two programs at the same time. A Single Block DRB Reactor cannot be upgraded to a Dual Block

  • …modular blocks, accommodating various tube sizes from 0.2 mL micro-tubes to 50mL centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention. Heaters require OHAUS modular heating blocks for…

  • Dry Bath Block

    Crystal Technologies

    …temperature distribution on the thermal block. These Digital Dry Baths are ideal tools for a wide variety of life science, clinical and general chemistry applications. Microprocessor controlled with digital display High quality aluminum block and heating elements provide good temperature…

  • BTD Dry Block Heater

    Grant Instruments

    …ambient + 5 to 100°C A compact and flexible fixed block system for rapid and precise heating of microtubes up to 100°C. Stability ± 0.1°C Digital temperature control for optimum precision Heating range ambient + 5°C to 100°C, with rapid heat-up time…

  • Dry Block Heaters

    IKA Works

    …situ hybridizations. Stepless adjustable temperature up to 120 °C Timer: Countdown, adjustable from 1 min to 99h 59min Counter: Display of heating time Highly versatile with a large number of blocks Error code display Fixed safety circuit Acoustic signal at end of test

  • Digital 2 Block Heater

    Techne (Cole-Parmer)

    …monitoring of the actual temperature. Excellent temperature stability and uniformity is maintained via sensitive electronic controls. Heats to 100°C in less than 12 minutes. Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.