Heat Block Lid

Compare Tool

Select up to 3 products

Heat Block Lid
1 - 32 of 42
Sort
View
Show
  • The new MyBlock™ HL is the first and only mini heat block featuring a heated lid for protecting samples against unwanted condensation and evaporation. Both the block and lid temperature can be selected independently in increments of 0.1°C, making this MyBlock the ideal choice for the…

  • IncuBlock™ Plus Digital Dry Baths

    labForce (a Thomas Scientific Brand)

    heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off) to accommodate taller tubes. Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept…

  • Palm™ Dry Bath

    ACTGene, Inc.

    …1.4kg Fully portable with optional car charger Heating and Cooling functions in one system For sample size up to 2ml Lid heating function to prevent sample evaporation Over-heating protection safety mechanism Build-in temperature calibration function Various blocks available

  • Flexi-Therm Dry Block Heater

    Vitl Life Science Solutions

    …the Vitl Heated Modules, provides accurate, repeatable heating for most laboratory consumables including microplates, microtubes and larger tubes. Key Features and Tech Specs Visual countdown timer and audible alert on completion of heating Heated lid on some Heated Modules gives…

  • lid to help prevent evaporation and maintain temperature uniformity. Efficient heater features close tube and block contact with a low density design for exceptional temperature uniformity. The heated lid model includes a second heater in the lid to help prevent condensation. Mini Dry Block Heaters…

  • …fast—the block heats from 20 to 150°C in less than 10 minutes. Safe to operate The fully insulated heater block of the DRB 200 reactor means there can be no skin contact with the heater block. Temperature safeguards are provided to prevent overheating. The lids are transparent…

  • Thermal Cyclers

    labForce (a Thomas Scientific Brand)

    …programs and folders. The fully adjustable heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°, the lid automatically shuts off. Heating and cooling of the block are precisely and accurately controlled…

  • Mini Thermal Cyclers

    labForce (a Thomas Scientific Brand)

    …to adjust. The temperature of the heated lid can be changed or the heating function of the lid may be turned off. With a footprint less than that of the average laboratory notebook, the Mini Thermal Cycler will fit almost anywhere. Its reduced capacity block and economical price make the Mini…

  • …measuring block temperature. Efficient heating due to close tube-and-block contact with a low density design for exceptional temperature uniformity. The heated lid helps to regulate the temperature and reduce the amount of condensation on sample lids. Heaters require OHAUS modular heating blocks for…

  • Intelligent Heated Modules

    Vitl Life Science Solutions

    Heated Modules, used as adapters for the Flexi-Therm dry block heater and Ther-Mix heated laboratory mixer. Our Heated modules are a more efficient and accurate method of sample heating. They work in a similar way to PCR-style heating - instead of heating the air around the sample, the lid

  • …fast—the block heats from 20 to 150°C in less than 10 minutes. Safe to operate The fully insulated heater block of the DRB 200 reactor means there can be no skin contact with the heater block. Temperature safeguards are provided to prevent overheating. The lids are transparent…

  • An Aluminum Single Block filled with Lab Armor Beads. Capacity: 0.25L and 0.50L of Beads, Thermal Uniformity: 'At 95°C to +/- 1.0°c w/Lid. LxWxH: 3.25 x 2.5 x 2.5 inches (8.4 x 6.4 x 6.4 cm). Variety of Colors.

  • …be stored in memory. The MultiGene Mini is available with either a 24 x 0.2 ml tube block or 18 x 0.5 ml tube block. Blocks are easily interchanged. Units come standard with an adjustable heated lid. The lid features a slip gear to provide proper compression to prevent sample evaporation without…

  • …be stored in memory. The MultiGene Mini is available with either a 24 x 0.2 ml tube block or 18 x 0.5 ml tube block. Blocks are easily interchanged. Units come standard with an adjustable heated lid. The lid features a slip gear to provide proper compression to prevent sample evaporation without…

  • …hours. At 7°C, the blocks return to their original colour, clearly showing when they are no longer refrigerating the samples. The blocks come incorporated into a rack with an accompanying lid for easier handling and to further protect your samples. As Ergo Freeze Blocks are in SBS-format,…

  • Ther-Mix Heated Laboratory Mixer

    Vitl Life Science Solutions

    Heated Modules available to support a variety of samples, plates and tubes Independent control of block and lid temperatures Innovative heated lid on some Modules provides direct tube contact to reduce sample evaporation Calibration and control data pre-programmed with each Heated Module …

  • ThermoMixer

    Eppendorf

    …performance due to unique 2DMix-Control technology Anti-spill technology prevents lid wetting and crosscontamination Reliable prevention of condensate formation with the optional ThermoTop (condens.protect) lid Excellent temperature management and maximum temperature accuracy Maximum…

  • …well block with horizontal gradient Easy, user-friendly programming Auto-adjusting heated lid Precision thermal control Ideal for both thermal cycling and protocol optimization, the MultiGene Gradient can be programmed to operate with uniform temperature across the block or…

  • …new IsoBlock from Benchmark contains two isolated block chambers. Each chamber is controlled independently, allowing the dry bath to serve as two dry baths in one. The hinged (and removeable) lid is designed with a dividing wal, when the lid is closed this dividing wall acts as a barrie, preventing…

  • heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off) to accommodate taller tubes. Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept…

  • RevCycler

    Revolutionary Science

    …disinfecting block greatly mitigates the chances of cross-contamination! Product Features Heated lid Built in controls (Resistive color touch screen) 19 independent programmable thermalcycling protocols Programmable incubation temperature Auto disinfecting block feature…

  • …independent thermal cyclers in one housing The Biometra TRIO thermal cycler is the only instrument that provides three independent blocks and heated lids in one housing. Thanks to the multiblock technology three different independent protocols can be run in parallel. The Biometra TRIO offers…

  • …programs and folders. The fully adjustable heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°, the lid automatically shuts off. Heating and cooling of the block are precisely and accurately controlled…

  • …contact between the sample block well and the walls of the plastic ware, resulting in reproducible conditions. As soon as the heated lid is closed, a rubber seal on the lid encapsulates the space surrounding the sample block. This closed space increases the sample block temperature uniformity and…

  • Hinged lid (included) also removable Quik-CAL™ user calibration function Seamless, stainless steel chamber myBath 4L Includes racks for 1.5/2.0, 15 & 50ml tubes The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four…

  • Save 15% on the purchase of a an Eppendorf ThermoMixer C Bundle that includes a SmartBlock and SmartExtender. Mixing, heating, and cooling in one instrument for high flexibility  All common vessels and plate formats from 5 µL to 50 mL by different Eppendorf SmartBlocks for…

  • …steel test cup, stainless steel lid and shutter The metal cooling block (7120B25) is for above ambient testing. It is used to cool down the test cup between tests. The refrigerant-charged cooling block (7120B28) is used for sub-ambient testing. The heat transfer compound (7120B31) is for…

  • …dry block heating system; micro-processor controlled vortex motion; maintenance-free microprocessor-controlled motor; phenol-free gasket; audible alarm. In addition, the system has automatic vacuum release, Teflon-coated aluminum chamber and sample blocks, glass lid with Lexan shield; dual lid

  • …adjust. The temperature of the heated lid can be changed or the heating function of the lid may be turned off. With a footprint less than that of the average laboratory notebook, the TC-32 Mini Thermal Cycler will fit almost anywhere. Its reduced capacity block and economical price make the…

  • …well and 96 well models. The Quick-X-Change interchangeable block capability permits fast easy replacement of blocks. Additional blocks can be ordered separately. FlexCycler 2 blocks are equipped with a High Performance Smart Lid which ensures the formation of a homogenous tempered air cushion…

  • …at the lid creates an encapsulated space when the lid is closed. The closed room serves to improve the temperature uniformity of the sample block and avoids formation of condensed water at the final PCR cooling step. High-Performance Smart Lid (HPSL) The heated lid of the Biometra…

  • Prime Elite Thermal Cyclers

    Techne (Cole-Parmer)

    …non-motorised heated lid, TERS thermal energy recovery system and a unique space-saving, stackable design. Prime Elite and Prime Elite Satellites can be combined to form a two, three or four block instrument with Satellites controllable from the Prime Elite or a PC. Gradient blocks and 4 year…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.