Ground Joint Thermometer

Compare Tool

Select up to 3 products

Ground Joint Thermometer
1 - 22 of 22
Sort
View
Show
  • Feature a 10/30 ground joint and Celsius scale. Each thermometer is calibrated for specific immersion depths. They contain red organic liquid against white back glass.

  • Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The 10/30 outer joint will permit a thermometer to be inserted vertically to the bottom of the vessel. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

  • PYREX® thermometer adapters have a Standard Taper ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder.

  • Thermometer is mineral spirit filled to eliminate workplace and environmental hazards associated with mercury. Thermometer has a white back, a 6 to 7mm outer diameter, and a standard taper 10/18 inner ground joint. All ranges have 1° subdivisions. Immersion is measured from the bottom…

  • Thermometer is mineral spirit filled to eliminate workplace and environmental hazards associated with mercury. Thermometer has a white back, a 6 to 7mm outer diameter, and a standard taper 10/30 inner ground joint. All ranges have 1º subdivisions. Immersion is measured from the bottom…

  • …head with 45/50 bottom joint, PTFE-Clad. No grease needed, will not freeze. Top 19/38 center joint, and are 14/20 side necks are ground. See 9443-20 for head with PTFE-Clad bottom joint and polished top joints. Side arms are placed at proper angles so that the thermometer or addition tube may be…

  • Conical 4" (10.2cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a 10/30 joint for a ground joint thermometer. Use 6496 Clamp for securing to f

  • Laboratory grade thermometer is mineral spirit filled to eliminate workplace and environmental hazards associated with mercury. Thermometer has a white back, 6-7mm outer diameter and a standard taper 7/12 inner ground joint. All ranges have a 2° subdivisions. Immersion is measured from…

  • Tube 24/40

    Corning

    These PYREX® thermometer adapters have a 24/40 Standard Taper ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder. For replacement rubber thermometer holders, see No. 7715 (0319W06). This tube is also a…

  • Pycnometer, 10 mL

    DWK Life Sciences (Kimble)

    Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL size…

  • Head, Duran Flange

    Ace Glass

    Flat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.

  • Head, Duran Flange

    Ace Glass

    Flat ground flange for use with all Reaction Flasks that have a 150mm (6") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.

  • Tube 19/22

    Corning

    These PYREX® thermometer adapters have a 19/22 Standard Taper ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder. For replacement rubber thermometer holders, see No. 7715 (0319W06). This tube is also a…

  • 250 ml Flask, Round Bottom, 19/22 Clear

    DWK Life Sciences (Wheaton)

    …over ground joints: Superior in vacuum and radioactive applications Smooth surfaces resist contamination Cleaning is simple and thorough Interchangeable with ground joints All chemical changes and thermometer scales remain visible through the joints Clear-Seal joints have never…

  • Distilling Kits

    GSC International, Inc.

    …Flask with Thermometer Holder, 1L with a 24/40 ground glass joint (#FLSK-24-40-1L) 1 Biomass Flask 1 Distilling Arm with a 45/50 ground glass joint (#4009-45-50) 1 Distillation Separation Tube (#SPTB-PTFE) 1 Liebig Condenser, 300mm long with 24/40 ground glass joints (#CL300MM-24-40)…

  • …reaction assembly utilizing an Ace-Thred instead of a ground joint for improved immersion well / cooling tube seal. Features a 14/20 angled joint for sparger tube, 24/40 vertical joint for a condenser and a #7 Ace-Thred thermometer joint. Actual working volumes are 40 to 50% of stated capacity.…

  • Adapters, Bushing

    Chemglass

    Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.

  • Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus. Similar to CG-1016, but made entirely of PTFE.

  • thermometer joint. Included 5029 nylon bushing & FETFE o-ring permits vertical adjustment of 6-7mm OD thermometers. Use with our 6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground

  • Organic Chemistry Set

    GSC International, Inc.

    …all joints are ground 19/22. Set Includes: 1 West condenser 1 Distilling Column 1 Round-bottom flask, 500ml 1 Round-bottom flask, 250ml 1 Round-bottom flask, 100ml 1 Round-bottom flask, 50ml 1 Round-bottom flask, 25ml 1 Separatory funnel, 100ml 1 Bleed tube 1 Thermometer

  • VitroKit

    DWK Life Sciences (Wheaton)

    …Usable interchangeably with Standard Taper ground joints, although smooth, transparent Clear-Seal® joints less likely to seize and do not require lubrication Kit contains following assortment: Claisen adapter; connecting adapter; thermometer adapter with Neoprene bushing; vacuum…

  • …taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground flanges,…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.