Grinding Ball

Compare Tool

Select up to 3 products

Grinding Ball
1 - 32 of 37
Sort
View
Show
  • Natural Brazilian agate stone grinding balls for planetary and high energy ball mills.

  • Balls: 5/32 inch (4 mm) Made of 440C stainless steel. Used with 2100 Grinding Ball Dispenser and all 96-well titer plates. 2155 Grinding Balls: 3/8 inch (9.5 mm) Made of 440C stainless steel. For use in 2230 titer plate or in 2190 Vial Rack with 3116PC, 2241-PC and 2241-PE Vials to grind

  • …closing. Applications Dry grinding very tough or hard samples where heat generated can damage plastic tubes Cryogenic dry grinding where severe cold temps (dry ice or LN2) can damage plastic tubes Milling or grinding non-biological samples where plastic contamination…

  • Nylon Grinding Jars

    Across International

    Nylon grinding jars for planetary ball mills. Each jar package includes grinding jar, lid, silicon sealing gasket and different sizes of mixed agate grinding balls. Lead time for 2L and 3L jars: 2 weeks.

  • PTFE Grinding Jars

    Across International

    Highly non-sticky PTFE jars. These jars are used whenever small quantity of samples need to be grinded/milled without contamination. Each jar set includes grinding jar, lid, silicon sealing gasket and a mixed size agate grinding balls. Lead tim

  • Polished stainless steel (grade 304) grinding jars for planetary ball mills. Each jar set includes grinding jar, lid, silicon sealing gasket and a mixed sizes of stainless steel grinding balls. Grade 304 is the most widely used austenite steel, also known as 18/8 for its composition of 18%…

  • ball mills have four grinding stations arranged on the "Sun Wheel" of the planetary ball mill. When the Sun Wheel rotates, the grinding balls inside the jars are subject to superimposed rotational movements, known as Coriolis Forces. The difference in speeds between the grinding balls and…

  • Ball and Vial Sets

    SPEX SamplePrep

    …and 1/4 in. (6.35 mm) agate ball. Volume 1.6 mL; grinding load 0.2 – 0.6 mL; mixing load 1 mL. Agate Ball, 1/4 in. (6.35 mm): 1/4 in. (6.35 mm) diameter agate ball; for SPEX SamplePrep 3118 Vial Set. Methacrylate Balls, 1/8 in.: Methacrylate Balls 1/8 in. (3.2 mm) diameter; fit…

  • …planetary ball mills. It has a single grinding station for grinding jars with a nominal volume of 12 to 500 mL and can achieve a final fineness of <1 µm.  The unit can store up to 10 combinations of speed, grinding time and interval settings for use with repetitive grinding tasks. All…

  • ball mills have four grinding stations arranged on the "Sun Wheel" of the planetary ball mill. When the Sun Wheel rotates, the grinding balls inside the jars are subject to superimposed rotational movements, known as Coriolis Forces. The difference in speeds between the grinding balls and…

  • ball mills have four grinding stations arranged on the "Sun Wheel" of the planetary ball mill. When the Sun Wheel rotates, the grinding balls inside the jars are subject to superimposed rotational movements, known as Coriolis Forces. The difference in speeds between the grinding balls and…

  • For grinding and mixing hard materials. Includes 1/4 in. diam. ball pestle. Legal Information: Wig-L-Bug is a registered trademark of Dentsply Rinn

  • …testing, and industrial settings. Adapters are available for microplates, microtubes, and 50ml tubes. Grinding jars and balls in a variety of materials are available. Wet homogenization, dry grinding and cryogrinding can all be performed with the BeadBlaster™ 96. The arced motion of the…

  • …used for the grinding process without overheating the sample. Due to the special grinding jar geometry, the sample is thoroughly mixed which results in a narrow particle size distribution. Unlike other high energy ball mills, the Emax is capable of continuous grinding operation without…

  • Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints. Supplied complete with one Viton o-ring of the listed size.

  • VQ-N ball mills may be referred to as shaker mills, mixer mills or high-energy ball mills. They can be used for both wet and dry grinding as well as to mix a variety of solids, suspended liquids and pastes. This unit is ideal for preparing small batches of your sample efficiently. Features …

  • Vial Sets and Balls

    SPEX SamplePrep

    …caps, one 1/2 in. (12.7 mm) alumina ceramic ball, and eight corprene gaskets. Volume 45 mL; grinding load 2–8 mL; mixing load approximately 20 mL. Alumina Ceramic Ball, 1/2 in. (12.7 mm): 1/2 in. (12.7 mm) diameter alumina ceramic ball for SPEX SamplePrep 8003 Vial Set. Tungsten…

  • grinding ball (2155), fits 2240-PE Vial Set, 2663 Cryo-Block, and 2190 Vial Rack. Not pre-cleaned. Grinding load per vial 1.5 mL. Sold in units of 240. 2250 Pre-Cleaned 15 mL Polycarbonate Vial Set : Each set includes 5 pre-cleaned 2251PC vials, each with a 7/16 in. (11 mm) steel grinding ball

  • Lysing Matrix SS contains one 1/4" stainless-steel grinding ball to break hard/brittle samples. Impact-resistant tube RNA extraction from difficult samples Lysis by impaction with minimal mechanical shearing Lysing Matrices are critical components of the FastPrep™…

  • Lysing Matrix SS contains one 1/4" stainless-steel grinding ball to break hard/brittle samples. Impact-resistant tube RNA extraction from difficult samples Lysis by impaction with minimal mechanical shearing Lysing Matrices are critical components of the FastPrep™…

  • Frosted Polyethylene Vial

    SPEX SamplePrep

    …measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is 1-3 gram, mixing load 3 mL. Sold in package of 200. Vial sets are an alternative…

  • Lysing Matrix SS, Bulk

    MP Biomedicals

    Lysing Matrix SS contains one 1/4" stainless-steel grinding ball to break hard/brittle samples. Impact-resistant tube RNA extraction from difficult samples Lysis by impaction with minimal mechanical shearing Lysing Matrices are critical components of the FastPrep™…

  • …: Square 10 mL wells with a working capacity of 4 mL per well. Use with 2231 Cap-Mat, and one 3/8 in. (9.5 mm) steel grinding ball (2155) or 7/16 in. (11 mm) steel grinding ball (2156) per well. 2230 24-Well Titer Plate: Same as above, but a single titer plate. 2231-10 Cap-Mat for 2230…

  • Lysing Matrix SS contains one 1/4" stainless-steel grinding ball to break hard/brittle samples. Impact-resistant tube RNA extraction from difficult samples Lysis by impaction with minimal mechanical shearing Lysing Matrices are critical components of the FastPrep™…

  • 2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…

  • …center cylinders, and two 5/16 in. (7.9 mm) tungsten carbide balls. Volume 5 mL; grinding load 0.5–1.5 mL; mixing load 3 mL. Tungsten Carbide Ball Set, 5/16 in.: 5/16 in. (7.9 mm) diameter tungsten carbide ball; for SPEX SamplePrep 5004 Vial Set. Methacrylate Center Cylinder…

  • …setup, add samples and you are ready to go. Vials are self-standing, making it easier to add samples, and are prefilled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel balls. Approximate grinding load per vial is 0.5-1.0 mL.

  • …(12.7 mm) agate balls, and eight corprene gaskets. Volume 45 mL; grinding load 3–8 mL; mixing load approximately 20 mL. Agate Ball, 1/2 in. (12.7 mm): 1/2 in. (12.7 mm) diameter agate ball for SPEX SamplePrep 8014 Vial Set. Clamp/Slurry Grinding w/8003 Grinding Vial: Clamps…

  • …reproducible, efficient grinding, mixing and homogenization in seconds powerful grinding by impact and friction, up to 25 Hz for up to 20 samples per run 9 SOPs can be stored wide range of accessories including various jar and ball sizes, adapter racks, grinding tool materials …

  • CryoMill

    Retsch

    …keep the temperature at -196°C. Powerful impact ball milling results in a perfect grinding efficiency. The Autofill system avoids direct contact with LN2 and makes cryogenic grinding very safe. Its versatility (cryogenic, wet and dry grinding at room temperature) makes the CryoMill the ideal…

  • …provide excellent alkaline buffer, corrosion prevention for metal(i.e. Zinc,Aluminium) and function of softening water. In ceramic industry, it is used as a ceramic grinding, glue and water reducing agent can extend the life of ball mill, drying tower to improve efficiency and reduce cost.

  • 8000M Mixer/Mill

    SPEX SamplePrep

    High-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst supports, glass,…

Compare Tool

Select up to 3 products