Graduated Centrifuge Tube

Compare Tool

Select up to 3 products

Graduated Centrifuge Tube
1 - 32 of 201
Sort
View
Show
  • Heavy-Duty Graduated Centrifuge Tubes with Screw Caps

    DWK Life Sciences (Kimble)

    Graduated and calibrated to contain Scale is durable white ceramic enamel Made with heavier walled tubing to withstand higher centrifugation speed Top has a screw thread finish Autoclavable cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured…

  • Graduated Reusable Centrifuge Tubes

    DWK Life Sciences (Kimble)

  • Graduated Reusable Centrifuge Tubes with Screw Caps

    DWK Life Sciences (Kimble)

    Standard Taper KIMAX® tube with a screw thread finish Graduated and calibrated to contain Cap supplied has cemented-in white rubber liner and is packaged separately Scale, legend and marking spot are durable white ceramic enamel Replacement cap for 0493K43 & 0492Y27 is 45066B …

  • Tube Centrifuge Graduated 50ml

    DWK Life Sciences (Kimble)

  • Tube Centrifuge Graduated Goetz 100ml

    DWK Life Sciences (Kimble)

    …and legend are durable white ceramic enamel Rings coincide with specific volumes of liquid Supplied in a matched set of 6 Graduated ring scale of any of the six tubes will not vary by more than 3 mm from that of any other tube within the set *Do not centrifuge with stopper in tube.

  • Tube Centrifuge Graduated PTFE 13ml

    DWK Life Sciences (Kimble)

  • Tube Centrifuge Graduated w / Stopper 15ml

    DWK Life Sciences (Kimble)

  • Tube Centrifuge Graduated w / Stopper 50ml

    DWK Life Sciences (Kimble)

  • Tube Centrifuge Graduated Heavy Duty 50ml

    DWK Life Sciences (Kimble)

  • PYREX® 50mL Conical Centrifuge Tube, White Graduations with Pourout

    Corning

    …bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy. The durable, white enamel scale is graduated from 0 to 10mL in 0.5mL divisions, and…

  • PYREX® 15mL Conical Centrifuge Tube with White Graduations, Beaded Rim

    Corning

    These 15mL PYREX® conical centrifuge tubes have white enamel graduations. The 15mL sizes are graduated upward from tip in 0.1mL divisions.

  • Denville Centrifuge Tubes

    Denville

    Printed Graduations (with marking area) New clearer polypropylene copolymer High centrifugal strength - up to 15,000 RCF Flat markable cap with leakproof seal Phenol / Chloroform resistant DNase, RNase and pyrogen free

  • 50mL Polystyrene Centrifuge Tube

    Globe Scientific

    50mL centrifuge tube, polystyrene (PS) with red screwcap (HDPE) and printed graduations. Available in non-sterile and sterile packaging White graduation marks and writing area

  • PYREX® 50mL Conical Centrifuge Tube with Black Graduations, Beaded Rim

    Corning

    These 50mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.

  • Diamond Midi™ Centrifuge Tube

    Globe Scientific

    tube to retrieve samples Available non-sterile or sterile and are RNase, DNase and pyrogen free Spin up to 25,000 x g when used with proper support in appropriate rotor 5mL Diamond® Midi™ Screw Cap Centrifuge Tubes Single turn threaded caps seal easily and securely Graduated in…

  • PYREX® 50mL Conical Centrifuge Tube with White Graduations and Standard Taper…

    Corning

    These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.

  • PYREX® 40mL Heavy Duty Conical Centrifuge Tube with White Graduations, Beaded…

    Corning

    …conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors…

  • 12mL Centrifuge Test Tubes

    Globe Scientific

    tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Globe's broad range of sizes are sure to fit most laboratory applications. 12mL centrifuge tube with rim, conical bottom, graduated. Graduated at 0.5,…

  • PYREX® 10mL Heavy Duty Conical Centrifuge Tubes with White Graduations, Screw…

    Corning

    centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity of these heavy duty tubes. The10mL tube is graduated

  • Kimax® Oil Centrifuge Tube with Permanent Red Stripe and Graduations, 100 mL

    DWK Life Sciences (Kimble)

    KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

  • Falcon® Conical Centrifuge Tubes

    Corning

    …and leakage Easy-to-read graduations Consistent biological and physical properties Ideal for long-term cryogenic storage of specimens at -80°C (15 to 225 mL polypropylene tubes) The most dependable tube in the lab Falcon conical tubes are easy-to-use, high quality…

  • Graduated Microcentrifuge Tubes

    Thomas®

    …Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5, 1.0…

  • 15 & 50mL Centrifuge Tubes

    Celltreat Scientific

    tubes, 16,000g for 50mL conical bottom tubes, and 6,000g for self-standing tubes Polystyrene tubes Max Force (RCF) is 3,000g Temperature range of -80°C to 120°C 15 and 50mL clear tubes are available in recyclable racks or bulk packaged in zip-closure bags Clear centrifuge tubes

  • Ultra-High-Speed 15mL & 50mL Polypropylene Centrifuge Tubes

    labForce (a Thomas Scientific Brand)

    labForce Ultra-High-Speed 15mL & 50mL Centrifuge Tubes have been designed for high speed centrifugation and meet the demands of the most crucial scientific work. Produced using premium grade USP Class VI resins in an automated, touch free manufacturing process that provides both ultimate…

  • Centrifuge Tube 15 ml

    Corning

    These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…

  • Centrifuge Tube 15 ml

    Corning

    These 15mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.

  • Centrifuge Tube 12 ml

    Corning

    …conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors…

  • 15mL Acrylic Centrifuge Tubes

    Globe Scientific

    …rpm (6,160 x g) compared to polystyrene, which has a limited spin rate of 1,700 rpm Tube: Acrylic (AC) Cap: High Density Polyethylene (HDPE) Sterile tubes are Rnase/Dnase free, non-pyrogenic and non-cytotoxic Spin rate: 5,000 rpm (6,160 x g) Tube: -40°C to +70°C Cap: -50°C to +100°C

  • Centrifuge Tubes

    United Scientific Supplies

    Polypropylene tubes include blue HDPE leak-proof screw caps. The tubes and caps feature specially-designed flat threads for vacuum-type closure that is leak-free at a press of >700mm Hg. Highly smooth hydrophobic internal surfaces minimize wall effect. Silk-screen graduations and a frosted…

  • Centrifuge Tubes

    NEST Scientific USA

    Printed Graduations (with marking area) Polypropolyne for the tube and polyethylene for the cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and…

  • Centrifuge Tubes

    United Scientific Supplies

    These polypropylene tubes feature a screw top with easy to read black graduations. These sterile, conical bottom tubes also feature a writing area to allow for easy sample identification. Temperatures between 0-40degrees Celsius are the suggested working range.

  • Tube Centrifuge 50ml

    DWK Life Sciences (Kimble)

    This graduated 50 ml KIMAX tube has a short tapered bottom. Graduated and calibrated to contain. The top end has a pour spout. Scale, legend and marking spot are durable white ceramic enamel. 50ml total capacity; graduated from 0-10 ml in increments of 0.5 ml and from 10-50 ml in increments…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.