Glass Well Plate

Compare Tool

Select up to 3 products

Glass Well Plate
1 - 32 of 167
Sort
View
Show



  • …335nm allows most fluorescence assays to be excited or read through the glass bottom. All plates supplied lidded. 175um glass thickness +/-15um flatness across base 335nm UV optical cut-off Industry-standard well layout Very low autofluorescence High degree of planar flatness …

  • …creates a cradle of non-binding and inert glass to protect your sample.  This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the same from any potential compounds leached from the plastic. The plate design: Mid-height to maximize…

  • …detachable wells. 96 well plates have a volume of 1,200 µL per well; 384 well plates have a volume of 250 µL per well; and 1536 well plates have a volume of 50 µL per well. Total weight including inserts is 289 g, 23.5 g and 768 g respectively for 96, 384 and 1536-well plates.

  • Multiple Well Plates

    Celltreat Scientific

    glass bottom is optically clear, and provides microwell ideal for cell culture and microscopy or imaging Non-cytotoxic medical adhesive does not inhibit cell growth Multiple Well Plates are labeled with alpha-numeric markings for easy identification of individual wells Each well has a…

  • 24 Well ComboPlate™

    Greiner Bio-One

    …provides excellent optical properties for microscopic inspection of crystal growth. Flat, raised rings around each well minimise spills and cross-contamination. 18 mm glass or plastic coverslips or VIEWseal™, a clear sealing tape, can be used to separately seal each reservoir. A slightly…

  • These products are sold as one microplate with 96 inserts installed.

  • Round liner plug locks into 8mm glass inserts assembled in the 96-Square Well Deep Plate Manufactured from medical grade silicone Autoclavable and excellent chemical compatibility

  • glass Glass bottom thickness of 200 µm is well suited for imaging microscopy Bottom flatness Low background fluorescence and minimal crosstalk to provide the highest possible optical quality for cell based assays Half area 96 well microplate reduces reagent consumption 384 well

  • The Solid Aluminum Base Plate and the Vented Aluminum Base Plate are ideal for use with volatile solvents or for situations requiring uniform heating and cooling of samples. Standard 8x12 (96 well) footprint with a stamped alpha-numeric ID grid Base plate design assures uniform heating…

  • 96-Well Plate with Glass Inserts Designed for High Throughput Chromatography Glass Inserts loaded in the 96-well plate performs similar to standard 12x32mm vials for Chromatography testing. 96-well pierceable Cap Mat is lined with the sample PTFE/Silicone septa used in closures for…

  • RP modified plates serve two purposes: act as a pilot method for HPLC and allow to choose various solvent system for special separations. RP-modified silica layers from EMD Millipore are well suited for many separation challenges that unmodified silica cannot overcome. These layers use aqueous…

  • …codes 96 and 384 well filter plates feature rigid side walls of white polystyrene, making the plate ideal for automation. The individual filter disks are encapsulated in the plate by a special over-molding process to ensure the integrity of each well. Glass fiber filter plates can be used for a…

  • RP modified plates serve two purposes: act as a pilot method for HPLC and allow to choose various solvent system for special separations. RP-modified silica layers from EMD Milliporeare well suited for many separation challenges that unmodified silica cannot overcome. These layers use aqueous…

  • …warning light to warn when top plate is Independent safety circuit to protect against overheating Powerful stirring action Ideal for handling large vessels   Stylish and economical, general purpose stirrer hotplates designed with safety as well as performance in mind.…

  • …Plus glass bottom microplate is designed for FCS and demanding microscopic applications. Like the classic SensoPlate™ models from Greiner Bio-One, the SensoPlate™ Plus glass bottom plate consists of a black frame upon which a 175μm thick borosilicate glass bottom plate is glued.…

  • …excellent optical properties with reduced autofluorescence in the lower UV range, low birefringence and a refractive index of 1.53 comparable to glass. Furthermore, thy enable complete periphery access for high magnification objectives and are entirely manufactured out of cycloolefin with a…

  • …inserts assembled in the square well plate can be sealed with a Molded 96-Square Well Mat 1.0mL and 1.2mL inserts assembled in the square well plate can be sealed with a Molded 96-Round Well Mat Compatible with autosamplers and robotic systems All Glass Inserts are available Silanized

  • RP modified plates serve two purposes: act as a pilot method for HPLC and allow to choose various solvent system for special separations. RP-modified silica layers from EMD Millipore are well suited for many separation challenges that unmodified silica cannot overcome. These layers use aqueous…

  • …335nm allows most fluorescence assays to be excited or read through the glass bottom. All plates supplied lidded. 175um glass thickness +/-15um flatness across base 335nm UV optical cut-off Industry-standard well layout Very low autofluorescence High degree of planar flatness …

  • …200, the Bio-Tek µQuant™, the Bio-Rad UltraMark™, the Molecular Devices SPECTRAmax® 190 and 250 plate readers. It offers extremely low absorbance background, excellent well to well uniformity, and zero percent cross talk. Packed 25 plates per sleeve, 2 sleeves per case.

  • …335nm allows most fluorescence assays to be excited or read through the glass bottom. All plates supplied lidded. 175um glass thickness +/-15um flatness across base 335nm UV optical cut-off Industry-standard well layout Very low autofluorescence High degree of planar flatness …

  • The 100 µl UNIFILTER microplate is the only 384-well filter microplate with a 100 µl well volume to allow a large enough sample for recovery after filtration. Beneath the filter plate are long drip directors designed to eliminate well-to-well contamination during the filtration process. …

  • Separation Plates, Square Top

    Innovative Laboratory Products

    …Pyrogen Free Certification Matching silicone cap mats   Glass coated, polypropylene deep well plates.  The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  This SiO2 coating helps to: Reduced…

  • Zymo-Spin 384 Well Plate

    Zymo Research Corporation

    384-well polypropylene spin plate with 1.2 µm glass fiber membrane. 140 µl/well, long drip.

  • Cellulose plates are used to analyze polar substances. An organic sorbent, cellulose is perfect for separating hydrophilic substances by partition chromatography. Typical applications include the analysis of amino acids, carbohydrates, and phosphates as well as nucleic acid and nucleic acid…

  • Separation Plates

    Innovative Laboratory Products

    …inert glass to protect your sample.  This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the same from any potential compounds leached from the plastic. The plate design: A 1.3mL working volume plate with round, conical-V bottom wells

  • …of vials for Agilent's LC instruments. Our 6mL vials allow for larger sample volumes and are recommended for G2258 Dual Loop and G1367 Well Plate Autosamplers Only. Caps are sold separately.   Magnetic Headspace Caps with Septa: (All Silicone is Low Bleed) The 18mm magnetic…

  • A comprehensive line of 96-well microplates for chromatography, the Plate Sampling System™ uses closures familiar to those who work with standard chromatography vials. Polypropylene μLplates™ have a variety of closures that will stabilize the sample during the analytical sample…

  • …like paper, leather, electrophoresis gels and agar plates may be difficult to measure with traditional pH glass bulbs due to concerns about breakage. A flat electrode like our pH2100, is ideally suited for these types of pH measurements as well as measurements of suspended sludges and slurries. In…

  • RP modified plates serve two purposes: act as a pilot method for HPLC and allow to choose various solvent system for special separations. RP-modified silica layers from EMD Milliporeare well suited for many separation challenges that unmodified silica cannot overcome. These layers use aqueous…

  • …or phosphorescence from a 6-, 12-,24-, 48-, or 96-well plate in either the X or Y direction or for luminescence micro densitometry of TLC plates and electrophoresis gels. Controlled by the computer. Silica excitation fiber, glass emission fiber. May require LS-50B Upgrade Kit (P/N L2108529).…

  • …3000 Analyzer. Ultra flat thick well bottom is designed for high throughput imaging by minimizing microscope refocusing from well to well. More economical solution than glass bottom plates. Better cell growth and attachment than glass bottom plates. Black opaque walls to prevent well-to-well…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.