Glass Well Plate

…creates a cradle of non-binding and inert glass to protect your sample.  This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the same from any potential compounds leached from the plastic. The plate design: Mid-height to maximize…

…detachable wells. 96 well plates have a volume of 1,200 µL per well; 384 well plates have a volume of 250 µL per well; and 1536 well plates have a volume of 50 µL per well. Total weight including inserts is 289 g, 23.5 g and 768 g respectively for 96, 384 and 1536-well plates.

…glass bottom is optically clear, and provides microwell ideal for cell culture and microscopy or imaging Non-cytotoxic medical adhesive does not inhibit cell growth Multiple Well Plates are labeled with alpha-numeric markings for easy identification of individual wells Each well has a…

96-Well Plate with Glass Inserts Designed for High Throughput Chromatography Glass Inserts loaded in the 96-well plate performs similar to standard 12x32mm vials for Chromatography testing. 96-well pierceable Cap Mat is lined with the sample PTFE/Silicone septa used in closures for…

…inserts assembled in the square well plate can be sealed with a Molded 96-Square Well Mat 1.0mL and 1.2mL inserts assembled in the square well plate can be sealed with a Molded 96-Round Well Mat Compatible with autosamplers and robotic systems All Glass Inserts are available Silanized

…200, the Bio-Tek µQuant™, the Bio-Rad UltraMark™, the Molecular Devices SPECTRAmax® 190 and 250 plate readers. It offers extremely low absorbance background, excellent well to well uniformity, and zero percent cross talk. Packed 25 plates per sleeve, 2 sleeves per case.

…of vials for Agilent's LC instruments. Our 6mL vials allow for larger sample volumes and are recommended for G2258 Dual Loop and G1367 Well Plate Autosamplers Only. Caps are sold separately.   Magnetic Headspace Caps with Septa: (All Silicone is Low Bleed) The 18mm magnetic…

…335nm allows most fluorescence assays to be excited or read through the glass bottom. All plates supplied lidded. 175um glass thickness +/-15um flatness across base 335nm UV optical cut-off Industry-standard well layout Very low autofluorescence High degree of planar flatness …

…provides excellent optical properties for microscopic inspection of crystal growth. Flat, raised rings around each well minimise spills and cross-contamination. 18 mm glass or plastic coverslips or VIEWseal™, a clear sealing tape, can be used to separately seal each reservoir. A slightly…

…Plus glass bottom microplate is designed for FCS and demanding microscopic applications. Like the classic SensoPlate™ models from Greiner Bio-One, the SensoPlate™ Plus glass bottom plate consists of a black frame upon which a 175μm thick borosilicate glass bottom plate is glued.…

…335nm allows most fluorescence assays to be excited or read through the glass bottom. All plates supplied lidded. 175um glass thickness +/-15um flatness across base 335nm UV optical cut-off Industry-standard well layout Very low autofluorescence High degree of planar flatness …

…glass Glass bottom thickness of 200 µm is well suited for imaging microscopy Bottom flatness Low background fluorescence and minimal crosstalk to provide the highest possible optical quality for cell based assays Half area 96 well microplate reduces reagent consumption 384 well…

…335nm allows most fluorescence assays to be excited or read through the glass bottom. All plates supplied lidded. 175um glass thickness +/-15um flatness across base 335nm UV optical cut-off Industry-standard well layout Very low autofluorescence High degree of planar flatness …

384-well polypropylene spin plate with 1.2 µm glass fiber membrane. 140 µl/well, long drip.

…wells improve sample access and mixing.  Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films.  Manufactured from virgin polypropylene and certified to be free of RNase, DNase, and Pyrogen contamination. Deep Well Plates…

…cover glass for minimum light scatter and low auto-fluorescence Optimum clarity for viewing Flat bottom well for plate reader access Rounded square wells eliminate wicking Footprint compatible with standard equipment and automated systems Non-treated plates are…

Round liner plug locks into 8mm glass inserts assembled in the 96-Square Well Deep Plate Manufactured from medical grade silicone Autoclavable and excellent chemical compatibility

WHEATON®MicroLiter µLplates® are sold as one microplate with 96 inserts installed.

Legal Information: MULTISCREEN is a registered trademark of Merck KGaA, Darmstadt, Germany

…or phosphorescence from a 6-, 12-,24-, 48-, or 96-well plate in either the X or Y direction or for luminescence micro densitometry of TLC plates and electrophoresis gels. Controlled by the computer. Silica excitation fiber, glass emission fiber. May require LS-50B Upgrade Kit (P/N L2108529).…

…codes 96 and 384 well filter plates feature rigid side walls of white polystyrene, making the plate ideal for automation. The individual filter disks are encapsulated in the plate by a special over-molding process to ensure the integrity of each well. Glass fiber filter plates can be used for a…

…scratch-free Resistant to organic solvents Packaged in a hinged plastic storage case 15 mm round cover glass can be used with a 24 well plate 20 mm round cover glass can be used with a 12 well plate or 35mm dish 25 mm round cover glass can be used with a 6 well plate Autoclavable

…excellent optical properties with reduced autofluorescence in the lower UV range, low birefringence and a refractive index of 1.53 comparable to glass. Furthermore, thy enable complete periphery access for high magnification objectives and are entirely manufactured out of cycloolefin with a…

…measurements are capable in the wavelength range above 350nm. Plates consist of a 175µm thick borosilicate glass-bottom plate bonded with a black polystyrene frame and features a chimney-well to help prevent cross contamination. Plates are sterile, comply with SBS recommendations, and include…

…plate is still sealed on its top-side with a polypropylene (PP) adhesive foil which is keeping the content inside each of the 96 wells. From the glass bottom side, verify that the glass cover is intact and that the gels look transparent, like if the wells were filled with water.1. Warm assay plate.…

Cellulose plates are used to analyze polar substances. An organic sorbent, cellulose is perfect for separating hydrophilic substances by partition chromatography. Typical applications include the analysis of amino acids, carbohydrates, and phosphates as well as nucleic acid and nucleic acid…

Cellulose plates are used to analyze polar substances. An organic sorbent, cellulose is perfect for separating hydrophilic substances by partition chromatography. Typical applications include the analysis of amino acids, carbohydrates, and phosphates as well as nucleic acid and nucleic acid…

…like paper, leather, electrophoresis gels and agar plates may be difficult to measure with traditional pH glass bulbs due to concerns about breakage. A flat electrode like our pH2100, is ideally suited for these types of pH measurements as well as measurements of suspended sludges and slurries. In…

The Solid Aluminum Base Plate and the Vented Aluminum Base Plate are ideal for use with volatile solvents or for situations requiring uniform heating and cooling of samples. Standard 8x12 (96 well) footprint with a stamped alpha-numeric ID grid Base plate design assures uniform heating…

RP modified plates serve two purposes: act as a pilot method for HPLC and allow to choose various solvent system for special separations. RP-modified silica layers from EMD Millipore are well suited for many separation challenges that unmodified silica cannot overcome. These layers use aqueous…

RP modified plates serve two purposes: act as a pilot method for HPLC and allow to choose various solvent system for special separations. RP-modified silica layers from EMD Milliporeare well suited for many separation challenges that unmodified silica cannot overcome. These layers use aqueous…

RP modified plates serve two purposes: act as a pilot method for HPLC and allow to choose various solvent system for special separations. RP-modified silica layers from EMD Milliporeare well suited for many separation challenges that unmodified silica cannot overcome. These layers use aqueous…