Glass Washer

Compare Tool

Select up to 3 products

Glass Washer
1 - 32 of 54
Sort
View
Show



  • Cuvette Washer

    DWK Life Sciences (Kimble)

    …·         All glass apparatus manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements   Overview : Washer is activated by lightly pressing the inverted…

  • Economical, durable, and gentle on delicate glass or quartz cuvettes, this all-plastic washer replaces costly, antiquated devices that are often more fragile than the cuvettes they wash. Comes complete with a 500 cc polypropylene vacuum flask, Vikem(R) vinly stopper, and 3' of PVC tubing ready for…

  • SYNTHWARE NMR Tube Washer

    Kemtech America

    With 24/40 inner joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied through…

  • …® and FlaskScrubbers ® . Detergent removes a wide range of laboratory contaminants and rinses completely. Will not degrade stainless steel, glass or plastic and it can be used in hot or cold water. Environmentally-friendly formula is phosphate-free and will not carry into sewer systems.

  • Baskets, insert racks and spindle racks maximize space, improve efficiency and protect specialty glassware. All accessories are stainless steel construction for long life and durability.

  • …Jet NMR Tube Washer can be used for any length NMR sample tube by a simple adjustment of the flexible PTFE tubing. By loosening and retightening the fitting on the assembled washer head, the PTFE tubing that extends into the sample tube is adjusted to the proper length. The washer head is then…

  • Performance/cycle 126 narrow-neck glasses or 121 pipettes – 7.42 (210) l capacity Ergonomic loading and unloading – telescopic runners Flexible – 4 different level positions Have everything in view thanks to the full-glass door High capacity – reprocessing of containers…

  • …interior, glass door, liquid detergent and liquid acid neutralizer internal dispensing pumps. Washer must be ordered with lower injector basket, and set of 39 injectors. 115V/60Hz. Perf./cycle, e.g., 39 narrow-neck/lab glassware w/ injectors Simple operation - LED color display with Touch on Glass

  • …fully resistant to common organic solvents Flanged reservoir connection eliminates joint freeze Greaseless joint between the solvent cup and glass reservoir eliminates possibility of contamination Complete disassembly without tools for easy cleaning Hands free during washing/drying cycle…

  • Glass aseptic filling bell for filling of other glass vessels. Tubing is attached to the top hose connection and the bell is placed over the top of the receiving flask or bottle. See part number 3906 for media dispensing flask.

  • … All models feature noise buffering insulation; Freestanding/Mobile Washers have a full 304 stainless steel casing for style and durability All washer units have adjustable height legs and Freestanding/Mobile Washers are supplied with removable wheels/casters DI models easily install with…

  • …durable washers include Standard, DI Rinse, and DI Rinse/Spindle Rack Ready models. All DI models also have the option of a DI Booster Pump, recommended when the incoming DI water source has a pressure of less than 18psi. All models feature noise buffering insulation All washer units have…

  • Washers provide maximum capacity and flexibility in a small footprint. Up to four loading levels in two independently controlled chambers - each chamber has two open racks and can be customized to meet specific requirements. This ultimate space saver provides up to 33% smaller footprint than washers

  • Solid glass plug has a threaded glass snelling which accepts an assembly similar to the one supplied with standard PTFE stopcocks. This consists of a PTFE washer, PTFE nut and Viton O-ring. Assembly provides for uniform seating tension to be applied to the plug which is precision ground and…

  • …the spigot at the front of the tank. The optional distribution accessory kit allows for distribution of distilled product water to a glassware washer, point of use deionization (DI) system or any system requiring distilled water as a feed source, while leaving the spigot at the front of the tank…

  • After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks…

  • …to 99% of the contaminants from your mains water feed to produce primary RO water.  The Puro offers you a small footprint solution to feed glass washers or other laboratory equipment. Features Low running costs One easy to change pre-filter Make-up rates ranging from 10-80…

  • Capillary Inlet Supplies Kit

    Agilent Technologies

    Kit Includes: Gold plated seal kit, includes washer Replacement for 18740-20885, 3 each Liner, split, straight, glass wool, non-deactivated, 4 each Liner, splitless, single-taper, glass wool, deactivated, 2 each Non-Stick Fluorocarbon O-ring, 10/pk Liner, direct, 2mm ID,…

  • Removes all traces of oil Air pressure drives solvent No electrical contact needed Unit is designed to wash the inside of glass kinematic viscometer tubes with a jet of solvent. At the touch of a button, the solvent stream is cut off and an air jet is directed into the tubes for…

  • Split/Splitless Injection Port Kit

    Agilent Technologies

    …seal kit, includes washer Replacement for 18740-20885, 3 each Liner, split, with cup, glass wool and packing, 3 each Liner, split, straight, glass wool, non-deactivated, 3 each Column ferrule installation tool Blanking plug, finger-tight style, 2 each Washers, 0.375 OD, 12/pk …

  • …port with a removable Ace-Safe hose connection. Threaded-jointed version has a filter flask with a 24/40 joint at top and a serrated hose connection on side. Complete item consists of: Tube Washer Body, Solvent Reservoir, PTFE Coupling, 5mm and 10mm Tube Bushing, Filter Flask, and 1/8" PTFE Tubing.

  • Self-Refilling Syringes

    DWK Life Sciences (Wheaton)

    …construction for long life Detachable three-way valve ensures repetitive accuracy of ±1% Interchangeable ground glass barrel with Viton ®®washers for corrosion resistance Supplied with blunt end cannula with Luer lock, long and short chrome-plated intake/air vent…

  • Grease-Free PTFE stirrer bearing designed for use under moderate vacuum applications. The bearing consists of a threaded glass adapter having an inner joint, a set of PTFE washer style bearings, a stainless steel spring, nylon alignment ring and Celcon® compression cap. The unique design of this…

  • …detergent dispense pumps and bottles for Labconco SteamScrubber and FlaskScrubber Washers. 304 stainless steel. Protective opaque silicone tips cover the ends of spindle tips to prevent scratching of glass and metal labware. 40 silicone tips per bag. For use with Labconco Upper or Lower Spindle…

  • …(to suit bench, wall or floor positions) Smooth crevice-free interior 0.2µm microbiological air vent filter Outlets for connecting to other equipment (i.e. polisher, analyzer, glass washer) Full level sensors Optional UV sterilizing lamp Optional CO2 filter

  • …detergent dispense pumps and bottles for Labconco SteamScrubber and FlaskScrubber Washers. 304 stainless steel. Protective opaque silicone tips cover the ends of spindle tips to prevent scratching of glass and metal labware. 40 silicone tips per bag. For use with Labconco Upper or Lower Spindle…

  • …detergent dispense pumps and bottles for Labconco SteamScrubber and FlaskScrubber Washers. 304 stainless steel. Protective opaque silicone tips cover the ends of spindle tips to prevent scratching of glass and metal labware. 40 silicone tips per bag. For use with Labconco Upper or Lower Spindle…

  • Dispenser Kits

    Labconco

    …detergent dispense pumps and bottles for Labconco SteamScrubber and FlaskScrubber Washers. 304 stainless steel. Protective opaque silicone tips cover the ends of spindle tips to prevent scratching of glass and metal labware. 40 silicone tips per bag. For use with Labconco Upper or Lower Spindle…

  • Stopcock Plug, Straight Bore, PTFE, Synthware, Bore: 2, 4, and 6mm available, Plug Size: 11/25, 15.2/30 and 16/35 available, supplied with PTFE plug, one PTFE washer and one o-ring.

  • Covers and Kits

    Labconco

    …detergent dispense pumps and bottles for Labconco SteamScrubber and FlaskScrubber Washers. 304 stainless steel. Protective opaque silicone tips cover the ends of spindle tips to prevent scratching of glass and metal labware. 40 silicone tips per bag. For use with Labconco Upper or Lower Spindle…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.