Glass Vacuum Filtration

Compare Tool

Select up to 3 products

Glass Vacuum Filtration
1 - 32 of 97
Sort
View
Show

PALL

  • GV 025 Series GV 025/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories Chemically resistant to most aqueous and organic solutions. Resistant to acids and caustic solutions. Autoclavable and can be sterilized in dry heat to…

  • GV 100 Series GV 100/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories Chemically resistant to most aqueous and organic solutions. Resistant to acids and caustic solutions. Autoclavable and can be sterilized in dry heat to…

  • Solvent Filtration Disposable Vacuum Bottle Top Filters

    labForce® (a Thomas Scientific Brand)

    The labForce Solvent Filtration Bottle Top Vacuum Filters offer a revolutionary approach to bulk solvent filtration. Safer, faster, and easier to use than conventional glass filtration assemblies, labForce’s Solvent Filtration funnels screw onto any vacuum-capable GL45 threaded bottle. Simply…

  • GV 050 Series GV 050/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, silicone cap and supplied with air inlet, membrane filter accessories Chemically resistant to most aqueous and organic solutions. Resistant to acids and caustic solutions. Autoclavable and can…

  • Millipore Glass Vacuum Filtration Accessory ProductGlass funnel, 300 mL, 47 mm, Borosilicate, Ground glass sealThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for…

  • Used for reduced pressure filtration with 7186 style, plain stem Buchner funnels. Top is tooled to accept a pluro stopper, bottom has a joint. Serrated hose connection has a second ring of 13.5mm O.D. Inserting the recommended size pluro stopper and th

  • Adapters are used for reduced pressure filtration with plain stem buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D. of 10mm at the largest serration. FOR PLURO STOPPERS SEE CG-1401.

  • Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D. of 10mm at the largest serration. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER, See CG-1401.

  • Adapter used for reduced pressure filtration with plain stem buchner funnels. Top has a HEAVY DUTY tooled flare to accept the listed size pluro stopper. Hose connection is 10mm OD at the largest serration. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER. CG-1052-A-14 Accepts up to…

  • Used with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.

  • for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent…

  • Borosilicate glass filtration apparatus accomodates 75mm membrane filters. The new design utilizes a PTFE Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

  • Borosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

  • Filtration Assemblies & Flask

    DWK Life Sciences (Kimble)

    glass to provide the mechanical strength needed for vacuum filtration Side-arm accepts standard 1/4" (6mm) i.d. tubing for connection to vacuum sources. A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into…

  • … Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as steel or rubber to minimize contamination of filtrate. The 15mL filtration funnel mounts on…

  • … Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as steel or rubber to minimize contamination of filtrate. The 300mL graduated funnel…

  • ULTRA-WARE® Filtration Caps

    DWK Life Sciences (Kimble)

    Body is constructed of glass-filled PTFE with a vacuum adapter for 1/4” ID tubing Upper screw clamp holds a solvent pickup adapter or funnel 40-60 micron porosity fritted glass filter support is removable Supplied with a PTFE/propylene o-ring

  • Features Filtration cartridges for sample clarification under vacuum (e.g., using the CHROMABOND® vacuum manifold or SPE automation systems like Gilson Aspec™, Rapidtrace) or by gravity Cartridge sizes 3 mL and 6 mL Different membranes: PET (polyester); RC (regenerated…

  • … Novel device lifts mem/liane after filtration, for easy removal with forceps Unique Microfil support filters faster than all-glass filter apparatus Select manifold-mounted filtration supports for laboratory use or stand-alone on-site filtration supports 100 mL or 250 mL funnels…

  • … Novel device lifts mem/pane after filtration, for easy removal with forceps Unique Microfil support filters faster than all-glass filter apparatus Select manifold-mounted filtration supports for laboratory use or stand-alone on-site filtration supports 100 mL or 250 mL funnels…

  • …holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Vacuum type glass holders Produced from borosilicate glass and available with a choice of support…

  • …aliquots of filtrate during filtration Two mounting options: No.8 stopper or 40/35 joint Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The…

  • …particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder offers an increased filtration area making it ideal for viscous…

  • …small volumes  3 funnel sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet concentrates…

  • …biological or particulate contamination under vacuum. The holder utilizes a 25mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE…

  • …contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless…

  • …solvent/sample filtrate recovery, as well as filtration of corrosive liquids for particulate contamination analysis The flask and fritted glass base are joined with a Standard Taper 40/35 ground joint, so liquids will only come in contact with borosilicate glass Vacuum hose connection…

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …borosilicate glass funnel and base., anodized aluminum spring clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter…

  • Designed for particulate or biological contamination analysis of small volumes using a vacuum filter. Includes a fritted glass filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated…

  • …the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures particles will not be shed into the filtrate. The PTFE support…

  • Millipore Glass Vacuum Filtration Accessory ProductGlass Base and Stopper, 47 mm, Glass frit membrane supportThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the…

  • For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.